Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fix airspeed sensor #670

Merged
merged 2 commits into from
Feb 15, 2014
Merged

Fix airspeed sensor #670

merged 2 commits into from
Feb 15, 2014

Conversation

LorenzMeier
Copy link
Member

This fixes the primary instance flag. It was wrong because the sensors didn't use the device_specific paths, but instead the generic one.

@LorenzMeier
Copy link
Member Author

This is NOT tested 8).

@julianoes
Copy link
Contributor

Tested on bench, thanks!
airspeed working again

julianoes added a commit that referenced this pull request Feb 15, 2014
@julianoes
Merge pull request #670 from PX4/airspeed_path_fix
0f7483c 
Fix airspeed sensor
@julianoes julianoes merged commit 0f7483c into beta Feb 15, 2014
@julianoes julianoes deleted the airspeed_path_fix branch February 15, 2014 20:35
PX4BuildBot pushed a commit that referenced this pull request Jul 8, 2018
PX4-NuttX/nuttx branch test: px4-master_auto_rebase
a7dc23f 
NuttX:
 - https://github.com/PX4-NuttX/nuttx/tree/px4-master_auto_rebase
 - PX4/NuttX@9874e65

Changes from PX4-NuttX/nuttx (PX4/NuttX@d5c12b2) in current PX4/master (dec0387)
PX4/NuttX@d5c12b2...9874e65

9874e65 (HEAD, origin/px4-master_auto_rebase) [PX4: WIP] Fix transmission status handling in the serial interrupt
e1825e3 [PX4: REJECTED] cstdint fix
4a6c13c [PX4: REJECTED] add math.h
32de998 [PX4: WIP] Jenkinsfile
9e63080 (origin/master) Merged in raiden00/nuttx/stm32h7 (pull request #670)
70dc642 The LPC54608 can only run at a maximum frequency of 180Mhz.  This configuration requires uses the clk_in, external crystal clock, to drive the PLL.  When that input was selected, the board bootup failed waiting for the PLL to lock.  After referring the driver from NXP, we should turn on power sources for the ext clock if system pll input select clk_in.  NOTE that the LPC54628 did not require this step... perhaps because the system oscillator power was already enabled.
a764e4a  drivers/leds/pca9635pw.c configs/stm32f4discovery/src/stm32_pca9635.c: Fix pca9635pw LED driver compilation
1450c0c arch/arm/src/stm32f7/stm32_sdmmc.c:  Fix some missing right parentheses.
6571d4f Update some comments.
078fd78 Merged in raiden00/nuttx (pull request #669)

Apps:
 - https://github.com/PX4-NuttX/apps/tree/px4-master_auto_rebase
 - PX4/NuttX-apps@444ee16

Changes from PX4-NuttX/apps (PX4/NuttX-apps@36806ba) in current PX4/master (dec0387)
PX4/NuttX-apps@36806ba...444ee16

444ee16 (HEAD -> px4-master_auto_rebase, origin/px4-master_auto_rebase) [REJECTED] add-var-expansion-in-nsh-parse.patch
e66470d (origin/master) Merged in raiden00/apps (pull request #143)
db77b1e apps/examples/tcpblaster:  Fix an error in time calculation.
19b8a52 apps/examples/tcpblaster/tcpblaster_server.c:  Start time was not being initialized on the server side on the first pass through loop so the first output record had a crazy time.
749eccb Squashed commit of the following:
4d8b8fa apps/netutils/dhcpc:  Activates BINDTODEVICE if available, and break up some long lines
0abe341 Merged in raiden00/apps (pull request #142)
3403b1b apps/nshlib/README.txt:  Clarify arguments to the mkrd command.
abcb66c Remove apps/interpreters/micropthon.  There are several reasons for this.  (1) the current version 1.3.8 is very old and no one is supporting it.  (2) the port only includes the core micropython logic and none of the Python libraries.  As such it is useless in any real application.  (3) There have recently been compile failures reported.  It looks like this is due to changes in newlib based toolchains that now bring in incompatible newlib header files.  See issue 104 at https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.  With no one dedicated to the support of micropython, it can no longer be carried in the NuttX apps/ repository.
36d6348 apps/nslib:  Try to eliminate and uninitialized variable warning.
PX4BuildBot pushed a commit that referenced this pull request Jul 8, 2018
PX4-NuttX/nuttx branch test: px4-master_auto_rebase
66d0805 
NuttX:
 - https://github.com/PX4-NuttX/nuttx/tree/px4-master_auto_rebase
 - PX4/NuttX@167e105

Changes from PX4-NuttX/nuttx (PX4/NuttX@d5c12b2) in current PX4/master (e4be8ec)
PX4/NuttX@d5c12b2...167e105

167e105 (HEAD, origin/px4-master_auto_rebase) [PX4: WIP] Fix transmission status handling in the serial interrupt
f2dd956 [PX4: REJECTED] cstdint fix
4da8782 [PX4: REJECTED] add math.h
2fadf4a [PX4: WIP] Jenkinsfile
fa56b1b (origin/master) Merged in raiden00/nuttx_h7 (pull request #671)
0e1fc1a tools/mkexport.sh:  Save the System.map file in the export package so that it can be used to extract addresses.
9e63080 Merged in raiden00/nuttx/stm32h7 (pull request #670)
70dc642 The LPC54608 can only run at a maximum frequency of 180Mhz.  This configuration requires uses the clk_in, external crystal clock, to drive the PLL.  When that input was selected, the board bootup failed waiting for the PLL to lock.  After referring the driver from NXP, we should turn on power sources for the ext clock if system pll input select clk_in.  NOTE that the LPC54628 did not require this step... perhaps because the system oscillator power was already enabled.
a764e4a  drivers/leds/pca9635pw.c configs/stm32f4discovery/src/stm32_pca9635.c: Fix pca9635pw LED driver compilation
1450c0c arch/arm/src/stm32f7/stm32_sdmmc.c:  Fix some missing right parentheses.

Apps:
 - https://github.com/PX4-NuttX/apps/tree/px4-master_auto_rebase
 - PX4/NuttX-apps@444ee16

Changes from PX4-NuttX/apps (PX4/NuttX-apps@36806ba) in current PX4/master (e4be8ec)
PX4/NuttX-apps@36806ba...444ee16

444ee16 (HEAD -> px4-master_auto_rebase, origin/px4-master_auto_rebase) [REJECTED] add-var-expansion-in-nsh-parse.patch
e66470d (origin/master) Merged in raiden00/apps (pull request #143)
db77b1e apps/examples/tcpblaster:  Fix an error in time calculation.
19b8a52 apps/examples/tcpblaster/tcpblaster_server.c:  Start time was not being initialized on the server side on the first pass through loop so the first output record had a crazy time.
749eccb Squashed commit of the following:
4d8b8fa apps/netutils/dhcpc:  Activates BINDTODEVICE if available, and break up some long lines
0abe341 Merged in raiden00/apps (pull request #142)
3403b1b apps/nshlib/README.txt:  Clarify arguments to the mkrd command.
abcb66c Remove apps/interpreters/micropthon.  There are several reasons for this.  (1) the current version 1.3.8 is very old and no one is supporting it.  (2) the port only includes the core micropython logic and none of the Python libraries.  As such it is useless in any real application.  (3) There have recently been compile failures reported.  It looks like this is due to changes in newlib based toolchains that now bring in incompatible newlib header files.  See issue 104 at https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.  With no one dedicated to the support of micropython, it can no longer be carried in the NuttX apps/ repository.
36d6348 apps/nslib:  Try to eliminate and uninitialized variable warning.
PX4BuildBot pushed a commit that referenced this pull request Jul 8, 2018
PX4-NuttX/nuttx branch test: px4-master_auto_rebase
f7d7d95 
NuttX:
 - https://github.com/PX4-NuttX/nuttx/tree/px4-master_auto_rebase
 - PX4/NuttX@e6ee7ea

Changes from PX4-NuttX/nuttx (PX4/NuttX@d5c12b2) in current PX4/master (e4be8ec)
PX4/NuttX@d5c12b2...e6ee7ea

e6ee7ea (HEAD, origin/px4-master_auto_rebase) [PX4: WIP] Fix transmission status handling in the serial interrupt
5349c41 [PX4: REJECTED] cstdint fix
0fc4dbe [PX4: REJECTED] add math.h
83e17ca [PX4: WIP] Jenkinsfile
1783d34 (origin/master) Eliminate some new warnings found in build testing.
fa56b1b Merged in raiden00/nuttx_h7 (pull request #671)
0e1fc1a tools/mkexport.sh:  Save the System.map file in the export package so that it can be used to extract addresses.
9e63080 Merged in raiden00/nuttx/stm32h7 (pull request #670)
70dc642 The LPC54608 can only run at a maximum frequency of 180Mhz.  This configuration requires uses the clk_in, external crystal clock, to drive the PLL.  When that input was selected, the board bootup failed waiting for the PLL to lock.  After referring the driver from NXP, we should turn on power sources for the ext clock if system pll input select clk_in.  NOTE that the LPC54628 did not require this step... perhaps because the system oscillator power was already enabled.
a764e4a  drivers/leds/pca9635pw.c configs/stm32f4discovery/src/stm32_pca9635.c: Fix pca9635pw LED driver compilation

Apps:
 - https://github.com/PX4-NuttX/apps/tree/px4-master_auto_rebase
 - PX4/NuttX-apps@94741ff

Changes from PX4-NuttX/apps (PX4/NuttX-apps@36806ba) in current PX4/master (e4be8ec)
PX4/NuttX-apps@36806ba...94741ff

94741ff (HEAD -> px4-master_auto_rebase, origin/px4-master_auto_rebase) [REJECTED] add-var-expansion-in-nsh-parse.patch
db9c56e (origin/master) apps/examples/powerled:  Eliminate a warning about an uninitialized variable.
e66470d Merged in raiden00/apps (pull request #143)
db77b1e apps/examples/tcpblaster:  Fix an error in time calculation.
19b8a52 apps/examples/tcpblaster/tcpblaster_server.c:  Start time was not being initialized on the server side on the first pass through loop so the first output record had a crazy time.
749eccb Squashed commit of the following:
4d8b8fa apps/netutils/dhcpc:  Activates BINDTODEVICE if available, and break up some long lines
0abe341 Merged in raiden00/apps (pull request #142)
3403b1b apps/nshlib/README.txt:  Clarify arguments to the mkrd command.
abcb66c Remove apps/interpreters/micropthon.  There are several reasons for this.  (1) the current version 1.3.8 is very old and no one is supporting it.  (2) the port only includes the core micropython logic and none of the Python libraries.  As such it is useless in any real application.  (3) There have recently been compile failures reported.  It looks like this is due to changes in newlib based toolchains that now bring in incompatible newlib header files.  See issue 104 at https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.  With no one dedicated to the support of micropython, it can no longer be carried in the NuttX apps/ repository.
PX4BuildBot pushed a commit that referenced this pull request Jul 9, 2018
PX4-NuttX/nuttx branch test: px4-master_auto_rebase
7c41472 
NuttX:
 - https://github.com/PX4-NuttX/nuttx/tree/px4-master_auto_rebase
 - PX4/NuttX@e6ee7ea

Changes from PX4-NuttX/nuttx (PX4/NuttX@d5c12b2) in current PX4/master (850b1ad)
PX4/NuttX@d5c12b2...e6ee7ea

e6ee7ea (HEAD) [PX4: WIP] Fix transmission status handling in the serial interrupt
5349c41 [PX4: REJECTED] cstdint fix
0fc4dbe [PX4: REJECTED] add math.h
83e17ca [PX4: WIP] Jenkinsfile
1783d34 Eliminate some new warnings found in build testing.
fa56b1b Merged in raiden00/nuttx_h7 (pull request #671)
0e1fc1a tools/mkexport.sh:  Save the System.map file in the export package so that it can be used to extract addresses.
9e63080 Merged in raiden00/nuttx/stm32h7 (pull request #670)
70dc642 The LPC54608 can only run at a maximum frequency of 180Mhz.  This configuration requires uses the clk_in, external crystal clock, to drive the PLL.  When that input was selected, the board bootup failed waiting for the PLL to lock.  After referring the driver from NXP, we should turn on power sources for the ext clock if system pll input select clk_in.  NOTE that the LPC54628 did not require this step... perhaps because the system oscillator power was already enabled.
a764e4a  drivers/leds/pca9635pw.c configs/stm32f4discovery/src/stm32_pca9635.c: Fix pca9635pw LED driver compilation

Apps:
 - https://github.com/PX4-NuttX/apps/tree/px4-master_auto_rebase
 - PX4/NuttX-apps@94741ff

Changes from PX4-NuttX/apps (PX4/NuttX-apps@36806ba) in current PX4/master (850b1ad)
PX4/NuttX-apps@36806ba...94741ff

94741ff (HEAD -> px4-master_auto_rebase, origin/px4-master_auto_rebase) [REJECTED] add-var-expansion-in-nsh-parse.patch
db9c56e (origin/master) apps/examples/powerled:  Eliminate a warning about an uninitialized variable.
e66470d Merged in raiden00/apps (pull request #143)
db77b1e apps/examples/tcpblaster:  Fix an error in time calculation.
19b8a52 apps/examples/tcpblaster/tcpblaster_server.c:  Start time was not being initialized on the server side on the first pass through loop so the first output record had a crazy time.
749eccb Squashed commit of the following:
4d8b8fa apps/netutils/dhcpc:  Activates BINDTODEVICE if available, and break up some long lines
0abe341 Merged in raiden00/apps (pull request #142)
3403b1b apps/nshlib/README.txt:  Clarify arguments to the mkrd command.
abcb66c Remove apps/interpreters/micropthon.  There are several reasons for this.  (1) the current version 1.3.8 is very old and no one is supporting it.  (2) the port only includes the core micropython logic and none of the Python libraries.  As such it is useless in any real application.  (3) There have recently been compile failures reported.  It looks like this is due to changes in newlib based toolchains that now bring in incompatible newlib header files.  See issue 104 at https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.  With no one dedicated to the support of micropython, it can no longer be carried in the NuttX apps/ repository.
PX4BuildBot pushed a commit that referenced this pull request Jul 9, 2018
PX4-NuttX/nuttx branch test: px4-master_auto_rebase
21af212 
NuttX:
 - https://github.com/PX4-NuttX/nuttx/tree/px4-master_auto_rebase
 - PX4/NuttX@718cd62

Changes from PX4-NuttX/nuttx (PX4/NuttX@d5c12b2) in current PX4/master (850b1ad)
PX4/NuttX@d5c12b2...718cd62

718cd62 (HEAD, origin/px4-master_auto_rebase) [PX4: WIP] Fix transmission status handling in the serial interrupt
bdf8456 [PX4: REJECTED] cstdint fix
9b40e86 [PX4: REJECTED] add math.h
9d84072 [PX4: WIP] Jenkinsfile
283b73e (origin/master) Fix lots of typos in C comments and Kconfig help text
1783d34 Eliminate some new warnings found in build testing.
fa56b1b Merged in raiden00/nuttx_h7 (pull request #671)
0e1fc1a tools/mkexport.sh:  Save the System.map file in the export package so that it can be used to extract addresses.
9e63080 Merged in raiden00/nuttx/stm32h7 (pull request #670)
70dc642 The LPC54608 can only run at a maximum frequency of 180Mhz.  This configuration requires uses the clk_in, external crystal clock, to drive the PLL.  When that input was selected, the board bootup failed waiting for the PLL to lock.  After referring the driver from NXP, we should turn on power sources for the ext clock if system pll input select clk_in.  NOTE that the LPC54628 did not require this step... perhaps because the system oscillator power was already enabled.

Apps:
 - https://github.com/PX4-NuttX/apps/tree/px4-master_auto_rebase
 - PX4/NuttX-apps@94741ff

Changes from PX4-NuttX/apps (PX4/NuttX-apps@36806ba) in current PX4/master (850b1ad)
PX4/NuttX-apps@36806ba...94741ff

94741ff (HEAD -> px4-master_auto_rebase, origin/px4-master_auto_rebase) [REJECTED] add-var-expansion-in-nsh-parse.patch
db9c56e (origin/master) apps/examples/powerled:  Eliminate a warning about an uninitialized variable.
e66470d Merged in raiden00/apps (pull request #143)
db77b1e apps/examples/tcpblaster:  Fix an error in time calculation.
19b8a52 apps/examples/tcpblaster/tcpblaster_server.c:  Start time was not being initialized on the server side on the first pass through loop so the first output record had a crazy time.
749eccb Squashed commit of the following:
4d8b8fa apps/netutils/dhcpc:  Activates BINDTODEVICE if available, and break up some long lines
0abe341 Merged in raiden00/apps (pull request #142)
3403b1b apps/nshlib/README.txt:  Clarify arguments to the mkrd command.
abcb66c Remove apps/interpreters/micropthon.  There are several reasons for this.  (1) the current version 1.3.8 is very old and no one is supporting it.  (2) the port only includes the core micropython logic and none of the Python libraries.  As such it is useless in any real application.  (3) There have recently been compile failures reported.  It looks like this is due to changes in newlib based toolchains that now bring in incompatible newlib header files.  See issue 104 at https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.  With no one dedicated to the support of micropython, it can no longer be carried in the NuttX apps/ repository.
PX4BuildBot added a commit that referenced this pull request Dec 13, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Sun Dec 13 12:39:13 UTC 2020
b461087 
    - sitl_gazebo in PX4/Firmware (e51000c): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 14, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Mon Dec 14 00:38:32 UTC 2020
703ff17 
    - sitl_gazebo in PX4/Firmware (e51000c): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 14, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Mon Dec 14 12:38:15 UTC 2020
f8b4b14 
    - sitl_gazebo in PX4/Firmware (fdd1d6d): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 15, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Tue Dec 15 00:39:20 UTC 2020
ee9ceb1 
    - sitl_gazebo in PX4/Firmware (fdd1d6d): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 15, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Tue Dec 15 12:40:04 UTC 2020
b358c96 
    - sitl_gazebo in PX4/Firmware (aa244a0): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 16, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Wed Dec 16 00:39:46 UTC 2020
65146f4 
    - sitl_gazebo in PX4/Firmware (aa244a0): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 16, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Wed Dec 16 12:39:40 UTC 2020
5d9b4af 
    - sitl_gazebo in PX4/Firmware (acc647c): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 17, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Thu Dec 17 00:39:56 UTC 2020
35524c6 
    - sitl_gazebo in PX4/Firmware (4d30f32): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@e5d0d65
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...e5d0d65

    e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 17, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Thu Dec 17 12:39:37 UTC 2020
e721330 
    - sitl_gazebo in PX4/Firmware (90f61c2): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@0e2d63a
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...0e2d63a

    0e2d63a 2020-12-17 JaeyoungLim - Fix wind transmormations for motor model (#674)
e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
PX4BuildBot added a commit that referenced this pull request Dec 17, 2020
@PX4BuildBot
Update submodule sitl_gazebo to latest Thu Dec 17 23:05:03 UTC 2020
3600b2a 
    - sitl_gazebo in PX4/Firmware (90f61c2): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@563f087
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...563f087

    563f087 2020-12-17 JaeyoungLim - Fix tiltrotor model (#675)
0e2d63a 2020-12-17 JaeyoungLim - Fix wind transmormations for motor model (#674)
e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
@dagar dagar mentioned this pull request Dec 17, 2020
Merged
dagar pushed a commit that referenced this pull request Dec 17, 2020
@PX4BuildBot @dagar
Update submodule sitl_gazebo to latest Thu Dec 17 23:05:03 UTC 2020
2a187a7 
    - sitl_gazebo in PX4/Firmware (90f61c2): PX4/PX4-SITL_gazebo-classic@19981d6
    - sitl_gazebo current upstream: PX4/PX4-SITL_gazebo-classic@563f087
    - Changes: PX4/PX4-SITL_gazebo-classic@19981d6...563f087

    563f087 2020-12-17 JaeyoungLim - Fix tiltrotor model (#675)
0e2d63a 2020-12-17 JaeyoungLim - Fix wind transmormations for motor model (#674)
e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
2 participants
@LorenzMeier @julianoes