v2.1.0

What's Changed

• Unwind test by @kstoykov in #986
• Fix base fee calculation for pre-london fork by @sieniven in #774
• 824-handing-of-sequencer-restarts-during-l1-recovery by @kstoykov in #991
• fix for ger update parsing from stream by @hexoscott in #995
• fix(l1syncer): acc input hash current batchno only by @revitteth in #997
• fix the long delay after datastream repopulation by @hexoscott in #1004
• fix verification response processing by @kstoykov in #1009
• feat(txpool): reject s/c deploy (flag) by @revitteth in #1000
• datastream repopulation logic changes and removal of batch partially … by @hexoscott in #992
• Zkevm allow jumpdest in push n by @hexoscott in #1011
• close state in json by @kstoykov in #1026
• remove "root" from receipts by @kstoykov in #1027
• speed up L1 recovery process (#1017) by @hexoscott in #1018
• Fix wrong stateeroot batchend by @V-Staykov in #1028
• force not using executors in l1recovery mode by @kstoykov in #1020
• add-sequener-timeout-on-empty-tx-pool by @kstoykov in #1032
• Duplicate values in debug timer by @kstoykov in #1033
• Optimize sequencer wait time by @louisliu2048 in #1037
• increase defaults for data stream server timeouts by @hexoscott in #1045
• handle-unwinds-on-seq-restart by @kstoykov in #1050
• added l1 syncer progress to metrics by @V-Staykov in #1055
• remove sendall opcode and use it on selfdestruct only by @V-Staykov in #1056
• handing-unwinds-on-seq-restart-2 by @kstoykov in #1061
• fix for using an info tree index with a re-used L1 block hash by @hexoscott in #1040
• print zero chainid for transaction rpc responces by @V-Staykov in #1063
• Optimisze coinbase address during recovery for the sequencer by @zjg555543 in #1043
• fix selfdestruct by @V-Staykov in #1064
• check if forkid8 is on by @V-Staykov in #1048
• zkevm_getProof by @cffls in #1014
• Delete rolled back L1 sequence on sequence rollback event by @cffls in #1022
• use correct l1 info index for counters and send full batch to executor by @hexoscott in #1069
• Update kurtosis version by @cffls in #1074
• do not unwind/prune l1 sync data by @hexoscott in #1072
• Include additional information to output batches MDBX browser tool by @Stefan-Ethernal in #1047
• do not use fork choice for finalised block in zk by @hexoscott in #1075
• update instructions for execution last opcode only by @kstoykov in #1068
• load most recent suitable info tree index at network start by @hexoscott in #1054
• fix-l1recovery-after-seq-restart by @kstoykov in #1080
• docs(readme): healthchecks by @revitteth in #1081
• added l2txhash to transaction arpc responces by @V-Staykov in #1079
• pars rpc errors by @V-Staykov in #1085
• upgrade trace to info log for overflowing counters by @hexoscott in #1086
• remove expiry on getting latest L1 block by @hexoscott in #1088
• remove counters from estimate gas by @V-Staykov in #1091
• fix sendall by @V-Staykov in #1087
• replaced maps with arrays in counters for optimization by @V-Staykov in #1093
• add-sendall-to-last-opcode-execution by @kstoykov in #1092
• disable l1 cache by default by @hexoscott in #1089
• rejig of batch closing logic in the sequencer by @hexoscott in #1095
• do not use LRU cache for OOC transactions by @hexoscott in #1094
• print empty batchl2data and custom batch 0 cases for getBatchByNumber by @V-Staykov in #1031
• Tweak: RollupID by @revitteth in #1053
• feat(inters): granular progress with totals by @revitteth in #1006
• Reset stage sync on error by @kstoykov in #1099
• check index for non increasing by @V-Staykov in #1052
• zkevm api unit test by @ARR552 in #1076
• txpool-respect-parse-transaction-result by @kstoykov in #1103
• tweak(stageloop): remove header db recovery loop by @revitteth in #1112
• get forkid dirrectly by block by @V-Staykov in #1116
• ci: sonarcloud config by @vcastellm in #1100
• Enable validium mode in kurtosis by @cffls in #1106
• overwrite transactions rather than append them in stage_execute by @V-Staykov in #1111
• don't accept txs with too high of a gas limit by @V-Staykov in #1119
• add batch end when needed and no more stream blocks available by @hexoscott in #1121
• Fix missing batch end by @hexoscott in #1126
• ci: exclude tests sonarcloud by @vcastellm in #1118
• fix-error-assignment by @kstoykov in #1123
• apply DS-EXECUTIOR alignment only on start by @kstoykov in #1124
• use pre identity counters for precompile 0x4 by @hexoscott in #1130
• update coutners by @V-Staykov in #1137
• add conditional progress printer on smt_batch so we don't spam on sta… by @V-Staykov in #1122
• fix immediate state reads in RPC by @hexoscott in #1138
• lower gas capping warn to debug by @V-Staykov in #1139
• add migration for the old counters maps by @V-Staykov in #1101
• added a few logs on tx process in sequencer and repeating code abstra… by @V-Staykov in #1140
• verifier logs by @kstoykov in #1143
• print tx counters on traceCounters rpc by @V-Staykov in #1142
• remove v,r,s, from estimateCounters rpc transaction by @V-Staykov in #1151
• datastream catchup get executed block if datastream block is 0 by @V-Staykov in #1154
• updated counters by @V-Staykov in #1155
• always track l1 info tree updates to the database by @hexoscott in #1158
• Sequencer update 04 do not wait at the end of a batch by @kstoykov in #1129
• Add L2BlockEnd to data stream spec doc by @ToniRamirezM in #1162
• Fix data format returned by zkevm_getBatchDataByNumbers by @cffls in #1157
• handle empty batch fork ids in the datastream by @hexoscott in #1164
• add missing genesis block end in datastream by @hexoscott in #1170
• add info tree index log to each...

v2.0.0-beta27

What's Changed

• create 2 allocation (#1325) by @hexoscott in #1331

Full Changelog: v2.0.0-beta26...v2.0.0-beta27

v2.0.0-beta26

What's Changed

• fix(verifier): wait until all promises are processed by @kstoykov in #1266
• feat(sequencer): update handing of errors by @kstoykov in #1275
• update erigon lib by @hexoscott in #1274
• better handling of errors bubbling up from the txpool by @hexoscott in #1278
• add correlation to send/receive requests to executor by @hexoscott in #1280

Full Changelog: v2.0.0-beta25...v2.0.0-beta26

v2.0.0-beta25

What's Changed

• use default gas price as the base fee by @hexoscott in #1257

Full Changelog: v1.2.24...v2.0.0-beta25

v2.0.0-beta24

What's Changed

• fix(stage_batches): only unwind if the stream block is ahead by @revitteth in #1250

Full Changelog: v1.2.22...v2.0.0-beta24

v1.2.24

What's Changed

• fix(stage_batches): only unwind if the stream block is ahead by @revitteth in #1250

Full Changelog: v1.2.22...v1.2.24

v2.0.0-beta22

What's Changed

• fix off by one issue in overwriting transactions by @hexoscott in #1234

Full Changelog: v2.0.0-beta21...v2.0.0-beta22

v1.2.22

What's Changed

• do not seal a batch immediately on overflow by @hexoscott in #1212
• fix off by one issue in overwriting transactions by @hexoscott in #1234

Full Changelog: v1.2.18...v1.2.22

v2.0.0-beta21

Notes

• Move TraceTransactionCounters to trace namespace

Full Changelog: v2.0.0-beta20...v2.0.0-beta21

v2.0.0-beta20

What's Changed

• do not seal a batch immediately on overflow by @hexoscott in #1212

Full Changelog: v2.0.0-beta19...v2.0.0-beta20