Config 2.0 Verify Version

For this test, you will need

• Atari Computer
• FujiNet
• Completed Config 2.0 Set WiFi Network

Steps

1. Reset FujiNet
2. Power on Atari, wait for CONFIG to boot.
3. Wait for Network connect
4. At Disks/Slots, press C for config.
5. Ensure #FUJINET CONFIG is displayed, with correct version.
6. Feel free to try C or S commands if wanted.
7. Power off.

Expected Result

• #FUJINET CONFIG should show version 2.0-2020-08-12, or newer.