Board bring up for FujiNet Platform.IO code

Welcome. It's 2024 and the production version of the FujiNet firmware is being written in Platform.IO. FujiNet is available on five Offically supported platforms now: Atari 8bit, Apple II - III, ADAM, and CoCo. Virtual implementations exist for Atari (Altirra), Apple II (AppleWin and AppleWinLinux) Coco (many) and ADAM.

Commodore 64 work is still being ironed out, and other platforms are spinning up (Macintosh 68k, Foenix Retro). If you want to help work on them you'll need to build or purchase some hardware to bridge to your system and then bring up the latest version of the code on your hardware. We will try to cover all the things you need to do in the following documents.

This section is now broken up into two documents:

• Board Bring up Hardware - hardware directions for interfacing with your hardware platform
• Board Bring up Software - software requirements and directions for compiling the code for the ESP32 firmware
• Development Env for Apps - how to setup a development env. to build apps that use FujiNet
• Software Changes for New Platforms - how to ensure the build works for a new platforms

Clearly you'll need working hardware first, unless you are working on the virtual FujiNet system for Atari 8bits (FujiNet-PC coupled with the Altirra Emulation). For that platform see Platform Virtual FujiNet.

Currently Supported Platforms

Platform ID	Platform	Status	Notes
fujinet-atari-v1	Atari 8 Bit	Current	Official
fujinet-v1-8mb	Atari 8 Bit	Current	custom ESP32-DEVKITC 8MB flash
fujinet-atari-esp32-s3-wroom-1-n16r8	Atari 8 Bit	Prototype	custom ESP32-S3 WROOM N16R8 board
fujinet-adam-v1	Coleco ADAM	Current	Official
fujiapple-rev0	Apple II	Current	Official (incl. Rev1 hardware)
fujiapple-d32pro	Apple II	Prototype	custom Lolin D32 Pro board
fujinet-coco-devkitc	Tandy CoCo	Current	Official
fujinet-coco-esp32-s3-wroom-1-n16r8	Tandy CoCo	Prototype	custom ESP32-S3 WROOM N16R8 board
fujinet-coco-esp32-s3-wroom-1-n8r8	Tandy CoCo	Prototype	custom ESP32-S3 WROOM N8R8 board
fujinet-coco-lolin-d32-dw	Tandy CoCo	Prototype	custom Lolin D32 Pro board
fujinet-foenix-lolin-d32-dw	Foenix 256	Prototype	custom Lolin D32 Pro board
fujinet-iec-nugget	Commodore IEC	Prototype	custom, uses TFT port on Lolin D32 Pro board
fujinet-iec-lolin-d32	Commodore IEC	Prototype	custom Lolin D32 Pro board
fujinet-iec-fujiapple	Commodore IEC	Prototype	custom using FujiApple Rev00 board
fujimac-rev0	Mac	Prototype	Macintosh 128, 512, Plus, SE
fujinet-lynx-prototype	Atari Lynx	Prototype	custom prototype
fujinet-rc2014spi-rev0	RC2014	Prototype	custom prototype
fujinet-rs232-rev0	RS-232 Serial	Prototype	custom prototype
fujinet-s100-v1-8mb	S-100	Prototype	custom prototype
fujinet-heathkit-h89	Heathkit H89	Prototype	custom
fujinet-cx16	Commander X16	Defunct	Prototype only, abandonded