A small Arduino library for GSM modules, that just works

A driver for ublox gps

C++ and Python sensor examples for developers

Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules

A driver for u-blox receiver (ZED-F9P) with ros support

Arduino and CMake library for communicating with uBlox GPS receivers.

This usb based ROS2 driver is focused on UBLOX Generation 9 UBX messaging, for a DGNSS rover. High precision data is available.

ROS2 drivers for U-blox ZED F9P

Repository with tools for the ublox RTK receiver.

u-blox GNSS receiver library light weight for low power tracking application

Simple NTP server with GPS satellites synchronization.

Versatile, feature-rich and user-friendly custom firmware for ALL revisions of Vaisala RS41 radiosondes

"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP.…

Ublox Linux Library

General Purpose Satellite Tracker

Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT

eCAL interface to the linux gps service daemon

Makes use of the CellLocate feature for indoor position estimation without GPS. When GPS is available, the location is calculated using CellLocate and GPS data in a hybrid configuration.

An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.

Ublox GPS I2C async library for mbed