Add centos instructions #1

posix4e · 2018-11-24T18:18:12Z

I tested this out on my vagrant

----VAGRANTFILE 

# -*- mode: ruby -*-
# vi: set ft=ruby :

# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.
Vagrant.configure("2") do |config|
  config.vm.box = "opensuse/openSUSE-15.0-x86_64"
  config.vm.provider "virtualbox" do |vb|
    vb.gui = true
    vb.memory = "2500"
  end
end
--- END FILE

COMMANDS :
sudo rpm --import  https://brave-browser-rpm-dev.s3.brave.com/brave-core-nightly.asc
zypper ar -f https://brave-browser-rpm-dev.s3.brave.com/x86_64/ brave
zypper update
zypper install brave-browser-dev

Transcript


$ vagrant ssh
# zypper  update
...
# sudo rpm --import  https://brave-browser-rpm-dev.s3.brave.com/brave-core-nightly.asc
...
vagrant-openSUSE-Leap:~ # zypper ar -f https://brave-browser-rpm-dev.s3.brave.com/x86_64/ brave
Adding repository 'brave' .........................................................................[done]
Repository 'brave' successfully added

URI         : https://brave-browser-rpm-dev.s3.brave.com/x86_64/
Enabled     : Yes                                               
GPG Check   : Yes                                               
Autorefresh : Yes                                               
Priority    : 99 (default priority)                             

Repository priorities are without effect. All enabled repositories share the same priority.
vagrant-openSUSE-Leap:~ # zypper  update
Retrieving repository 'brave' metadata ---------------------------------------------------------------[\]
Warning: File 'repomd.xml' from repository 'brave' is unsigned.

    Note: Signing data enables the recipient to verify that no modifications occurred after the data
    were signed. Accepting data with no, wrong or unknown signature can lead to a corrupted system
    and in extreme cases even to a system compromise.

    Note: File 'repomd.xml' is the repositories master index file. It ensures the integrity of the
    whole repo.

    Warning: We can't verify that no one meddled with this file, so it might not be trustworthy
    anymore! You should not continue unless you know it's safe.

File 'repomd.xml' from repository 'brave' is unsigned, continue? [yes/no] (no): yes
Retrieving repository 'brave' metadata ............................................................[done]
Building repository 'brave' cache .................................................................[done]
Loading repository data...
Reading installed packages...

Nothing to do.
# zypper install brave-browser-dev
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following 71 NEW packages are going to be installed:
  adwaita-icon-theme at-spi2-core brave-browser-dev cups-config expat fontconfig gdk-pixbuf-loader-rsvg
  gdk-pixbuf-query-loaders glib-networking gsettings-desktop-schemas gtk3-data gtk3-schema gtk3-tools
  libX11-xcb1 libXcursor1 libXft2 libXi6 libXinerama1 libXss1 libXtst6 libappindicator3-1 libasound2
  libatk-1_0-0 libatk-bridge-2_0-0 libatspi0 libavahi-client3 libavahi-common3 libcairo-gobject2
  libcairo2 libcolord2 libcups2 libdatrie1 libdbusmenu-glib4 libdbusmenu-gtk3-4 libepoxy0
  liberation-fonts libgdk_pixbuf-2_0-0 libgraphite2-3 libgtk-3-0 libharfbuzz0 libindicator3-7 libjbig2
  libjpeg8 libjson-glib-1_0-0 liblcms2-2 libpango-1_0-0 libpixman-1-0 librest-0_7-0 librsvg-2-2
  libsoup-2_4-1 libthai-data libthai0 libtiff5 libwayland-client0 libwayland-cursor0 libwayland-egl1
  libxcb-render0 libxcb-shm0 libxkbcommon0 lsb-release perl-CPAN-Changes perl-Devel-Symdump perl-Net-DBus
  perl-Pod-Coverage perl-Test-Pod perl-Test-Pod-Coverage perl-X11-Protocol perl-XML-Twig system-user-lp
  xdg-utils xkeyboard-config

71 new packages to install.
Overall download size: 87.3 MiB. Already cached: 0 B. After the operation, additional 123.4 MiB will be
used.
Continue? [y/n/...? shows all options] (y): y
Retrieving package expat-2.2.5-lp150.1.9.x86_64                    (1/71),  78.8 KiB (219.4 KiB unpacked)
Retrieving: expat-2.2.5-lp150.1.9.x86_64.rpm ......................................................[done]
Retrieving package fontconfig-2.12.6-lp150.2.5.x86_64              (2/71), 700.0 KiB (  1.1 MiB unpacked)
Retrieving: fontconfig-2.12.6-lp150.2.5.x86_64.rpm ....................................[done (4.9 KiB/s)]
Retrieving package gdk-pixbuf-query-loaders-2.36.11-lp150.3.4.x86_64
                                                                   (3/71),  38.2 KiB ( 15.3 KiB unpacked)
Retrieving: gdk-pixbuf-query-loaders-2.36.11-lp150.3.4.x86_64.rpm ....................[done (16.3 KiB/s)]
Retrieving package gsettings-desktop-schemas-3.24.1-lp150.1.8.x86_64
                                                                   (4/71),  54.0 KiB (146.7 KiB unpacked)
Retrieving: gsettings-desktop-schemas-3.24.1-lp150.1.8.x86_64.rpm .................................[done]
Retrieving package libXcursor1-1.1.15-lp150.1.3.x86_64             (5/71),  25.8 KiB ( 42.7 KiB unpacked)
Retrieving: libXcursor1-1.1.15-lp150.1.3.x86_64.rpm ...............................................[done]
Retrieving package libXi6-1.7.9-lp150.1.7.x86_64                   (6/71),  37.9 KiB ( 66.5 KiB unpacked)
Retrieving: libXi6-1.7.9-lp150.1.7.x86_64.rpm ........................................[done (11.9 KiB/s)]
Retrieving package libXinerama1-1.1.3-lp150.1.6.x86_64             (7/71),  11.2 KiB ( 10.2 KiB unpacked)
Retrieving: libXinerama1-1.1.3-lp150.1.6.x86_64.rpm ...............................................[done]
Retrieving package libXss1-1.2.2-lp150.3.1.x86_64                  (8/71),  12.6 KiB ( 14.2 KiB unpacked)
Retrieving: libXss1-1.2.2-lp150.3.1.x86_64.rpm ....................................................[done]
Retrieving package libXtst6-1.2.3-lp150.1.7.x86_64                 (9/71),  17.2 KiB ( 22.4 KiB unpacked)
Retrieving: libXtst6-1.2.3-lp150.1.7.x86_64.rpm ...................................................[done]
Retrieving package libatk-1_0-0-2.26.1-lp150.2.4.x86_64           (10/71),  75.7 KiB (174.7 KiB unpacked)
Retrieving: libatk-1_0-0-2.26.1-lp150.2.4.x86_64.rpm .................................[done (15.1 KiB/s)]
Retrieving package libatspi0-2.26.2-lp150.3.8.x86_64              (11/71), 100.2 KiB (200.9 KiB unpacked)
Retrieving: libatspi0-2.26.2-lp150.3.8.x86_64.rpm .................................................[done]
Retrieving package libavahi-common3-0.6.32-lp150.3.2.x86_64       (12/71),  38.6 KiB ( 51.2 KiB unpacked)
Retrieving: libavahi-common3-0.6.32-lp150.3.2.x86_64.rpm ..........................................[done]
Retrieving package libdatrie1-0.2.9-lp150.1.9.x86_64              (13/71),  43.5 KiB (110.9 KiB unpacked)
Retrieving: libdatrie1-0.2.9-lp150.1.9.x86_64.rpm ...................................[done (254.5 KiB/s)]
Retrieving package libdbusmenu-glib4-16.04.0-lp150.2.1.x86_64     (14/71),  65.3 KiB (184.2 KiB unpacked)
Retrieving: libdbusmenu-glib4-16.04.0-lp150.2.1.x86_64.rpm ........................................[done]
Retrieving package libepoxy0-1.4.3-lp150.2.4.x86_64               (15/71), 172.3 KiB (947.1 KiB unpacked)
Retrieving: libepoxy0-1.4.3-lp150.2.4.x86_64.rpm ..................................................[done]
Retrieving package liberation-fonts-1.07.4-lp150.2.1.noarch       (16/71), 824.7 KiB (  2.1 MiB unpacked)
Retrieving: liberation-fonts-1.07.4-lp150.2.1.noarch.rpm ..............................[done (2.9 MiB/s)]
Retrieving package libgraphite2-3-1.3.11-lp150.2.1.x86_64         (17/71),  77.2 KiB (150.0 KiB unpacked)
Retrieving: libgraphite2-3-1.3.11-lp150.2.1.x86_64.rpm ............................................[done]
Retrieving package libjbig2-2.1-lp150.1.14.x86_64                 (18/71),  32.9 KiB ( 67.1 KiB unpacked)
Retrieving: libjbig2-2.1-lp150.1.14.x86_64.rpm ....................................................[done]
Retrieving package libjpeg8-8.1.2-lp150.3.6.x86_64                (19/71), 125.8 KiB (418.1 KiB unpacked)
Retrieving: libjpeg8-8.1.2-lp150.3.6.x86_64.rpm ......................................[done (11.9 KiB/s)]
Retrieving package libjson-glib-1_0-0-1.4.2-lp150.3.4.x86_64      (20/71),  78.3 KiB (183.8 KiB unpacked)
Retrieving: libjson-glib-1_0-0-1.4.2-lp150.3.4.x86_64.rpm .........................................[done]
Retrieving package libpixman-1-0-0.34.0-lp150.1.8.x86_64          (21/71), 241.3 KiB (664.9 KiB unpacked)
Retrieving: libpixman-1-0-0.34.0-lp150.1.8.x86_64.rpm .............................................[done]
Retrieving package libthai-data-0.1.27-lp150.1.3.x86_64           (22/71), 138.3 KiB (558.6 KiB unpacked)
Retrieving: libthai-data-0.1.27-lp150.1.3.x86_64.rpm ..................................[done (1.6 MiB/s)]
Retrieving package libwayland-client0-1.14.0-lp150.1.4.x86_64     (23/71),  36.8 KiB ( 60.7 KiB unpacked)
Retrieving: libwayland-client0-1.14.0-lp150.1.4.x86_64.rpm ........................................[done]
Retrieving package libwayland-egl1-18.0.2-lp150.17.2.x86_64       (24/71), 148.2 KiB (  6.0 KiB unpacked)
Retrieving: libwayland-egl1-18.0.2-lp150.17.2.x86_64.rpm ..........................................[done]
Retrieving package lsb-release-3.0-lp150.1.6.noarch               (25/71),  19.7 KiB ( 29.2 KiB unpacked)
Retrieving: lsb-release-3.0-lp150.1.6.noarch.rpm ..................................................[done]
Retrieving package perl-CPAN-Changes-0.400002-lp150.1.7.noarch    (26/71),  38.1 KiB ( 56.1 KiB unpacked)
Retrieving: perl-CPAN-Changes-0.400002-lp150.1.7.noarch.rpm .......................................[done]
Retrieving package perl-Devel-Symdump-2.18-lp150.1.7.noarch       (27/71),  22.7 KiB ( 30.0 KiB unpacked)
Retrieving: perl-Devel-Symdump-2.18-lp150.1.7.noarch.rpm ..........................................[done]
Retrieving package perl-Test-Pod-1.51-lp150.1.7.noarch            (28/71),  22.5 KiB ( 19.1 KiB unpacked)
Retrieving: perl-Test-Pod-1.51-lp150.1.7.noarch.rpm ...............................................[done]
Retrieving package perl-X11-Protocol-0.56-lp150.1.6.x86_64        (29/71), 101.3 KiB (277.4 KiB unpacked)
Retrieving: perl-X11-Protocol-0.56-lp150.1.6.x86_64.rpm ...........................................[done]
Retrieving package system-user-lp-20170617-lp150.3.34.noarch      (30/71),  10.2 KiB (   68   B unpacked)
Retrieving: system-user-lp-20170617-lp150.3.34.noarch.rpm .............................[done (9.2 KiB/s)]
Retrieving package xkeyboard-config-2.23.1-lp150.1.2.noarch       (31/71), 391.7 KiB (  2.7 MiB unpacked)
Retrieving: xkeyboard-config-2.23.1-lp150.1.2.noarch.rpm ..........................................[done]
Retrieving package perl-XML-Twig-3.52-lp150.1.8.noarch            (32/71), 213.1 KiB (  1.1 MiB unpacked)
Retrieving: perl-XML-Twig-3.52-lp150.1.8.noarch.rpm ...................................[done (1.3 MiB/s)]
Retrieving package libXft2-2.3.2-lp150.1.6.x86_64                 (33/71),  43.5 KiB ( 91.5 KiB unpacked)
Retrieving: libXft2-2.3.2-lp150.1.6.x86_64.rpm ....................................................[done]
Retrieving package glib-networking-2.54.1-lp150.1.3.x86_64        (34/71),  93.0 KiB (205.9 KiB unpacked)
Retrieving: glib-networking-2.54.1-lp150.1.3.x86_64.rpm ...........................................[done]
Retrieving package at-spi2-core-2.26.2-lp150.3.8.x86_64           (35/71),  88.6 KiB (140.6 KiB unpacked)
Retrieving: at-spi2-core-2.26.2-lp150.3.8.x86_64.rpm ..............................................[done]
Retrieving package libavahi-client3-0.6.32-lp150.3.2.x86_64       (36/71),  42.2 KiB ( 67.1 KiB unpacked)
Retrieving: libavahi-client3-0.6.32-lp150.3.2.x86_64.rpm ..........................................[done]
Retrieving package libharfbuzz0-1.7.5-lp150.1.3.x86_64            (37/71), 291.4 KiB (726.0 KiB unpacked)
Retrieving: libharfbuzz0-1.7.5-lp150.1.3.x86_64.rpm ...............................................[done]
Retrieving package libthai0-0.1.27-lp150.1.3.x86_64               (38/71),  25.4 KiB ( 40.5 KiB unpacked)
Retrieving: libthai0-0.1.27-lp150.1.3.x86_64.rpm ..................................................[done]
Retrieving package libwayland-cursor0-1.14.0-lp150.1.4.x86_64     (39/71),  24.2 KiB ( 30.4 KiB unpacked)
Retrieving: libwayland-cursor0-1.14.0-lp150.1.4.x86_64.rpm ........................................[done]
Retrieving package perl-Pod-Coverage-0.23-lp150.1.7.noarch        (40/71),  27.7 KiB ( 31.2 KiB unpacked)
Retrieving: perl-Pod-Coverage-0.23-lp150.1.7.noarch.rpm ..............................[done (15.4 KiB/s)]
Retrieving package libsoup-2_4-1-2.62.2-lp150.1.1.x86_64          (41/71), 379.3 KiB (  1.1 MiB unpacked)
Retrieving: libsoup-2_4-1-2.62.2-lp150.1.1.x86_64.rpm .............................................[done]
Retrieving package libatk-bridge-2_0-0-2.26.1-lp150.2.8.x86_64    (42/71),  89.5 KiB (201.3 KiB unpacked)
Retrieving: libatk-bridge-2_0-0-2.26.1-lp150.2.8.x86_64.rpm .......................................[done]
Retrieving package perl-Test-Pod-Coverage-1.10-lp150.1.7.noarch   (43/71),  19.7 KiB ( 15.1 KiB unpacked)
Retrieving: perl-Test-Pod-Coverage-1.10-lp150.1.7.noarch.rpm ......................................[done]
Retrieving package librest-0_7-0-0.8.1-lp150.1.5.x86_64           (44/71),  60.3 KiB (155.0 KiB unpacked)
Retrieving: librest-0_7-0-0.8.1-lp150.1.5.x86_64.rpm ..............................................[done]
Retrieving package perl-Net-DBus-1.1.0-lp150.1.8.x86_64           (45/71), 201.2 KiB (571.2 KiB unpacked)
Retrieving: perl-Net-DBus-1.1.0-lp150.1.8.x86_64.rpm ..............................................[done]
Retrieving package gtk3-data-3.22.30-lp150.3.3.1.noarch           (46/71), 186.9 KiB (  3.8 KiB unpacked)
Retrieving: gtk3-data-3.22.30-lp150.3.3.1.noarch.rpm ..............................................[done]
Retrieving package gtk3-schema-3.22.30-lp150.3.3.1.noarch         (47/71), 188.1 KiB (  8.2 KiB unpacked)
Retrieving: gtk3-schema-3.22.30-lp150.3.3.1.noarch.rpm ............................................[done]
Retrieving package libX11-xcb1-1.6.5-lp150.2.3.1.x86_64           (48/71),  22.6 KiB (  5.9 KiB unpacked)
Retrieving: libX11-xcb1-1.6.5-lp150.2.3.1.x86_64.rpm .................................[done (13.9 KiB/s)]
Retrieving package libasound2-1.1.5-lp150.5.6.1.x86_64            (49/71), 432.0 KiB (  1.3 MiB unpacked)
Retrieving: libasound2-1.1.5-lp150.5.6.1.x86_64.rpm ...............................................[done]
Retrieving package liblcms2-2-2.9-lp150.2.3.1.x86_64              (50/71), 143.5 KiB (363.3 KiB unpacked)
Retrieving: liblcms2-2-2.9-lp150.2.3.1.x86_64.rpm .................................................[done]
Retrieving package libxcb-render0-1.13-lp150.2.3.1.x86_64         (51/71),  27.0 KiB ( 54.3 KiB unpacked)
Retrieving: libxcb-render0-1.13-lp150.2.3.1.x86_64.rpm ................................[done (7.6 KiB/s)]
Retrieving package libxcb-shm0-1.13-lp150.2.3.1.x86_64            (52/71),  18.5 KiB ( 14.1 KiB unpacked)
Retrieving: libxcb-shm0-1.13-lp150.2.3.1.x86_64.rpm ...............................................[done]
Retrieving package libtiff5-4.0.9-lp150.4.6.1.x86_64              (53/71), 214.6 KiB (498.0 KiB unpacked)
Retrieving: libtiff5-4.0.9-lp150.4.6.1.x86_64.rpm .................................................[done]
Retrieving package cups-config-2.2.7-lp150.2.3.1.x86_64           (54/71), 276.9 KiB (  3.1 MiB unpacked)
Retrieving: cups-config-2.2.7-lp150.2.3.1.x86_64.rpm ..................................[done (1.6 MiB/s)]
Retrieving package libxkbcommon0-0.8.2-lp150.2.3.1.x86_64         (55/71), 116.3 KiB (277.4 KiB unpacked)
Retrieving: libxkbcommon0-0.8.2-lp150.2.3.1.x86_64.rpm ............................................[done]
Retrieving package xdg-utils-20170508-lp150.3.3.2.noarch          (56/71),  88.9 KiB (344.9 KiB unpacked)
Retrieving: xdg-utils-20170508-lp150.3.3.2.noarch.rpm .............................................[done]
Retrieving package libcairo2-1.15.10-lp150.3.3.1.x86_64           (57/71), 547.7 KiB (  1.3 MiB unpacked)
Retrieving: libcairo2-1.15.10-lp150.3.3.1.x86_64.rpm ..................................[done (1.6 MiB/s)]
Retrieving package libcups2-2.2.7-lp150.2.3.1.x86_64              (58/71), 293.4 KiB (654.4 KiB unpacked)
Retrieving: libcups2-2.2.7-lp150.2.3.1.x86_64.rpm .................................................[done]
Retrieving package libpango-1_0-0-1.40.14-lp150.2.3.1.x86_64      (59/71), 202.7 KiB (520.5 KiB unpacked)
Retrieving: libpango-1_0-0-1.40.14-lp150.2.3.1.x86_64.rpm .............................[done (3.6 KiB/s)]
Retrieving package libcairo-gobject2-1.15.10-lp150.3.3.1.x86_64   (60/71),  52.9 KiB ( 34.1 KiB unpacked)
Retrieving: libcairo-gobject2-1.15.10-lp150.3.3.1.x86_64.rpm ......................................[done]
Retrieving package libcolord2-1.4.2-lp150.1.18.x86_64             (61/71), 180.1 KiB (526.0 KiB unpacked)
Retrieving: libcolord2-1.4.2-lp150.1.18.x86_64.rpm ................................................[done]
Retrieving package libgdk_pixbuf-2_0-0-2.36.11-lp150.3.4.x86_64   (62/71), 200.8 KiB (510.3 KiB unpacked)
Retrieving: libgdk_pixbuf-2_0-0-2.36.11-lp150.3.4.x86_64.rpm ......................................[done]
Retrieving package librsvg-2-2-2.42.3-lp150.1.20.x86_64           (63/71), 421.7 KiB (  1.2 MiB unpacked)
Retrieving: librsvg-2-2-2.42.3-lp150.1.20.x86_64.rpm ..................................[done (2.4 MiB/s)]
Retrieving package gdk-pixbuf-loader-rsvg-2.42.3-lp150.1.20.x86_64
                                                                  (64/71),  38.8 KiB ( 10.3 KiB unpacked)
Retrieving: gdk-pixbuf-loader-rsvg-2.42.3-lp150.1.20.x86_64.rpm ...................................[done]
Retrieving package gtk3-tools-3.22.30-lp150.3.3.1.x86_64          (65/71), 439.9 KiB (886.4 KiB unpacked)
Retrieving: gtk3-tools-3.22.30-lp150.3.3.1.x86_64.rpm .................................[done (1.5 MiB/s)]
Retrieving package adwaita-icon-theme-3.26.1-lp150.1.4.noarch     (66/71),  12.6 MiB ( 25.6 MiB unpacked)
Retrieving: adwaita-icon-theme-3.26.1-lp150.1.4.noarch.rpm ............................[done (3.0 MiB/s)]
Retrieving package libgtk-3-0-3.22.30-lp150.3.3.1.x86_64          (67/71),   2.6 MiB (  8.4 MiB unpacked)
Retrieving: libgtk-3-0-3.22.30-lp150.3.3.1.x86_64.rpm ................................[done (14.3 KiB/s)]
Retrieving package libindicator3-7-16.10.0+bzr20171205-lp150.1.1.x86_64
                                                                  (68/71),  44.0 KiB (106.8 KiB unpacked)
Retrieving: libindicator3-7-16.10.0+bzr20171205-lp150.1.1.x86_64.rpm ..............................[done]
Retrieving package libdbusmenu-gtk3-4-16.04.0-lp150.2.1.x86_64    (69/71),  53.3 KiB (148.5 KiB unpacked)
Retrieving: libdbusmenu-gtk3-4-16.04.0-lp150.2.1.x86_64.rpm .........................[done (725.1 KiB/s)]
Retrieving package libappindicator3-1-12.10.1+bzr20170215-lp150.3.1.x86_64
                                                                  (70/71),  37.3 KiB ( 88.7 KiB unpacked)
Retrieving: libappindicator3-1-12.10.1+bzr20170215-lp150.3.1.x86_64.rpm ...........................[done]
Retrieving package brave-browser-dev-0.58.9-1.x86_64              (71/71),  62.7 MiB ( 62.7 MiB unpacked)
Retrieving: brave-browser-dev-0.58.9-1.x86_64.rpm .....................................[done (3.3 MiB/s)]
Checking for file conflicts: ......................................................................[done]
( 1/71) Installing: expat-2.2.5-lp150.1.9.x86_64 ..................................................[done]
( 2/71) Installing: fontconfig-2.12.6-lp150.2.5.x86_64 ............................................[done]
( 3/71) Installing: gdk-pixbuf-query-loaders-2.36.11-lp150.3.4.x86_64 .............................[done]
( 4/71) Installing: gsettings-desktop-schemas-3.24.1-lp150.1.8.x86_64 .............................[done]
( 5/71) Installing: libXcursor1-1.1.15-lp150.1.3.x86_64 ...........................................[done]
( 6/71) Installing: libXi6-1.7.9-lp150.1.7.x86_64 .................................................[done]
( 7/71) Installing: libXinerama1-1.1.3-lp150.1.6.x86_64 ...........................................[done]
( 8/71) Installing: libXss1-1.2.2-lp150.3.1.x86_64 ................................................[done]
( 9/71) Installing: libXtst6-1.2.3-lp150.1.7.x86_64 ...............................................[done]
(10/71) Installing: libatk-1_0-0-2.26.1-lp150.2.4.x86_64 ..........................................[done]
(11/71) Installing: libatspi0-2.26.2-lp150.3.8.x86_64 .............................................[done]
(12/71) Installing: libavahi-common3-0.6.32-lp150.3.2.x86_64 ......................................[done]
(13/71) Installing: libdatrie1-0.2.9-lp150.1.9.x86_64 .............................................[done]
(14/71) Installing: libdbusmenu-glib4-16.04.0-lp150.2.1.x86_64 ....................................[done]
(15/71) Installing: libepoxy0-1.4.3-lp150.2.4.x86_64 ..............................................[done]
(16/71) Installing: liberation-fonts-1.07.4-lp150.2.1.noarch ......................................[done]
(17/71) Installing: libgraphite2-3-1.3.11-lp150.2.1.x86_64 ........................................[done]
(18/71) Installing: libjbig2-2.1-lp150.1.14.x86_64 ................................................[done]
(19/71) Installing: libjpeg8-8.1.2-lp150.3.6.x86_64 ...............................................[done]
(20/71) Installing: libjson-glib-1_0-0-1.4.2-lp150.3.4.x86_64 .....................................[done]
(21/71) Installing: libpixman-1-0-0.34.0-lp150.1.8.x86_64 .........................................[done]
(22/71) Installing: libthai-data-0.1.27-lp150.1.3.x86_64 ..........................................[done]
(23/71) Installing: libwayland-client0-1.14.0-lp150.1.4.x86_64 ....................................[done]
(24/71) Installing: libwayland-egl1-18.0.2-lp150.17.2.x86_64 ......................................[done]
(25/71) Installing: lsb-release-3.0-lp150.1.6.noarch ..............................................[done]
(26/71) Installing: perl-CPAN-Changes-0.400002-lp150.1.7.noarch ...................................[done]
(27/71) Installing: perl-Devel-Symdump-2.18-lp150.1.7.noarch ......................................[done]
(28/71) Installing: perl-Test-Pod-1.51-lp150.1.7.noarch ...........................................[done]
(29/71) Installing: perl-X11-Protocol-0.56-lp150.1.6.x86_64 .......................................[done]
(30/71) Installing: system-user-lp-20170617-lp150.3.34.noarch .....................................[done]
Additional rpm output:
useradd -r -s /sbin/nologin -c "Printing daemon" -g lp -d /var/spool/lpd lp


(31/71) Installing: xkeyboard-config-2.23.1-lp150.1.2.noarch ......................................[done]
(32/71) Installing: perl-XML-Twig-3.52-lp150.1.8.noarch ...........................................[done]
(33/71) Installing: libXft2-2.3.2-lp150.1.6.x86_64 ................................................[done]
(34/71) Installing: glib-networking-2.54.1-lp150.1.3.x86_64 .......................................[done]
(35/71) Installing: at-spi2-core-2.26.2-lp150.3.8.x86_64 ..........................................[done]
(36/71) Installing: libavahi-client3-0.6.32-lp150.3.2.x86_64 ......................................[done]
(37/71) Installing: libharfbuzz0-1.7.5-lp150.1.3.x86_64 ...........................................[done]
(38/71) Installing: libthai0-0.1.27-lp150.1.3.x86_64 ..............................................[done]
(39/71) Installing: libwayland-cursor0-1.14.0-lp150.1.4.x86_64 ....................................[done]
(40/71) Installing: perl-Pod-Coverage-0.23-lp150.1.7.noarch .......................................[done]
(41/71) Installing: libsoup-2_4-1-2.62.2-lp150.1.1.x86_64 .........................................[done]
(42/71) Installing: libatk-bridge-2_0-0-2.26.1-lp150.2.8.x86_64 ...................................[done]
(43/71) Installing: perl-Test-Pod-Coverage-1.10-lp150.1.7.noarch ..................................[done]
(44/71) Installing: librest-0_7-0-0.8.1-lp150.1.5.x86_64 ..........................................[done]
(45/71) Installing: perl-Net-DBus-1.1.0-lp150.1.8.x86_64 ..........................................[done]
(46/71) Installing: gtk3-data-3.22.30-lp150.3.3.1.noarch ..........................................[done]
(47/71) Installing: gtk3-schema-3.22.30-lp150.3.3.1.noarch ........................................[done]
(48/71) Installing: libX11-xcb1-1.6.5-lp150.2.3.1.x86_64 ..........................................[done]
(49/71) Installing: libasound2-1.1.5-lp150.5.6.1.x86_64 ...........................................[done]
(50/71) Installing: liblcms2-2-2.9-lp150.2.3.1.x86_64 .............................................[done]
(51/71) Installing: libxcb-render0-1.13-lp150.2.3.1.x86_64 ........................................[done]
(52/71) Installing: libxcb-shm0-1.13-lp150.2.3.1.x86_64 ...........................................[done]
(53/71) Installing: libtiff5-4.0.9-lp150.4.6.1.x86_64 .............................................[done]
(54/71) Installing: cups-config-2.2.7-lp150.2.3.1.x86_64 ..........................................[done]
(55/71) Installing: libxkbcommon0-0.8.2-lp150.2.3.1.x86_64 ........................................[done]
(56/71) Installing: xdg-utils-20170508-lp150.3.3.2.noarch .........................................[done]
(57/71) Installing: libcairo2-1.15.10-lp150.3.3.1.x86_64 ..........................................[done]
(58/71) Installing: libcups2-2.2.7-lp150.2.3.1.x86_64 .............................................[done]
(59/71) Installing: libpango-1_0-0-1.40.14-lp150.2.3.1.x86_64 .....................................[done]
(60/71) Installing: libcairo-gobject2-1.15.10-lp150.3.3.1.x86_64 ..................................[done]
(61/71) Installing: libcolord2-1.4.2-lp150.1.18.x86_64 ............................................[done]
(62/71) Installing: libgdk_pixbuf-2_0-0-2.36.11-lp150.3.4.x86_64 ..................................[done]
(63/71) Installing: librsvg-2-2-2.42.3-lp150.1.20.x86_64 ..........................................[done]
(64/71) Installing: gdk-pixbuf-loader-rsvg-2.42.3-lp150.1.20.x86_64 ...............................[done]
(65/71) Installing: gtk3-tools-3.22.30-lp150.3.3.1.x86_64 .........................................[done]
Additional rpm output:
update-alternatives: using /usr/bin/gtk-update-icon-cache-3.0 to provide /usr/bin/gtk-update-icon-cache (gtk-update-icon-cache) in auto mode


(66/71) Installing: adwaita-icon-theme-3.26.1-lp150.1.4.noarch ....................................[done]
(67/71) Installing: libgtk-3-0-3.22.30-lp150.3.3.1.x86_64 .........................................[done]
(68/71) Installing: libindicator3-7-16.10.0+bzr20171205-lp150.1.1.x86_64 ..........................[done]
(69/71) Installing: libdbusmenu-gtk3-4-16.04.0-lp150.2.1.x86_64 ...................................[done]
(70/71) Installing: libappindicator3-1-12.10.1+bzr20170215-lp150.3.1.x86_64 .......................[done]
(71/71) Installing: brave-browser-dev-0.58.9-1.x86_64 .............................................[done]
Additional rpm output:
service: no such service atd
update-alternatives: using /usr/bin/brave-browser-dev to provide /usr/bin/brave-browser (brave-browser) in auto mode
vagrant-openSUSE-Leap:~ # 
vagrant@vagrant-openSUSE-Leap:~> which brave-browser
/usr/bin/brave-browser

Submitter Checklist:

Test Plan:

Reviewer Checklist:

New files have MPL-2.0 license header.
Request a security/privacy review as needed.
Adequate test coverage exists to prevent regressions.

Tweak fedora instructions for dev to point to correct rpm rpo

Upgrade from Chromium 70.0.3538.77 Chromium 71.0.3578.20

Add Centos instructions

Upgrade from Chromium 71.0.3578.22 to 71.0.3578.31

Fix typo on Cent/RHEL

Relating to brave#1953

Bump 0.59.1

With this copying, we don't need to modify chrome/installer/setup/BUILD.gn to use our behaviors.cc file.

Copy brave_behaviors.cc to chrome dir

Some filies in chrome/app/theme should be patched.

Modify updatePatches to make patches in chrome/app/theme

Add disable_webtorrent_extension option

This commit adds the brave-keyring package entry to the instructions for installing the release version of brave-browser References: brave#1826

Fix brave#2056

Release notes for 0.56.x

docs/installing-brave.rst: add brave-keyring package entry

Fix brave#2078

Upgrade from Chromium 71.0.3578.31 to 71.0.3578.44

Fix brave#2108

Copy rewards l10n files when there are changes

Partial for brave#2102

When curl is called without the -s flag it stalls on the download progress and does not add key.

Fix brave#738

gn_helpers used by create-dist.py is there.

Fix incorrect name of .list file for dev ubuntu.

removed append from tee

Upgrade from Chromium 71.0.3578.44 to 71.0.3578.53

Resolves brave#1981: silence curl download progress in piped command to add key

Add src/build to python path

Fix brave#2194

Release notes for 0.56.x Hotfix 1

Fix brave#2217

Release notes for 0.56.x Hotfix 2

posix4e · 2018-11-24T18:21:15Z

brave#2233

Adds support for unified rewards flag

Upgrade from Chromium 71.0.3578.53 to 71.0.3578.75

Bump master to 0.60.1

I tested this out on my vagrant ``` ----VAGRANTFILE Vagrant.configure("2") do |config| config.vm.box = "opensuse/openSUSE-15.0-x86_64" config.vm.provider "virtualbox" do |vb| vb.gui = true vb.memory = "2500" end end --- END FILE COMMANDS : sudo rpm --import https://brave-browser-rpm-dev.s3.brave.com/brave-core-nightly.asc zypper ar -f https://brave-browser-rpm-dev.s3.brave.com/x86_64/ brave zypper update zypper install brave-browser-dev Transcript $ vagrant ssh ... ... vagrant-openSUSE-Leap:~ # zypper ar -f https://brave-browser-rpm-dev.s3.brave.com/x86_64/ brave Adding repository 'brave' .........................................................................[done] Repository 'brave' successfully added URI : https://brave-browser-rpm-dev.s3.brave.com/x86_64/ Enabled : Yes GPG Check : Yes Autorefresh : Yes Priority : 99 (default priority) Repository priorities are without effect. All enabled repositories share the same priority. vagrant-openSUSE-Leap:~ # zypper update Retrieving repository 'brave' metadata ---------------------------------------------------------------[\] Warning: File 'repomd.xml' from repository 'brave' is unsigned. Note: Signing data enables the recipient to verify that no modifications occurred after the data were signed. Accepting data with no, wrong or unknown signature can lead to a corrupted system and in extreme cases even to a system compromise. Note: File 'repomd.xml' is the repositories master index file. It ensures the integrity of the whole repo. Warning: We can't verify that no one meddled with this file, so it might not be trustworthy anymore! You should not continue unless you know it's safe. File 'repomd.xml' from repository 'brave' is unsigned, continue? [yes/no] (no): yes Retrieving repository 'brave' metadata ............................................................[done] Building repository 'brave' cache .................................................................[done] Loading repository data... Reading installed packages... Nothing to do. Loading repository data... Reading installed packages... Resolving package dependencies... The following 71 NEW packages are going to be installed: adwaita-icon-theme at-spi2-core brave-browser-dev cups-config expat fontconfig gdk-pixbuf-loader-rsvg gdk-pixbuf-query-loaders glib-networking gsettings-desktop-schemas gtk3-data gtk3-schema gtk3-tools libX11-xcb1 libXcursor1 libXft2 libXi6 libXinerama1 libXss1 libXtst6 libappindicator3-1 libasound2 libatk-1_0-0 libatk-bridge-2_0-0 libatspi0 libavahi-client3 libavahi-common3 libcairo-gobject2 libcairo2 libcolord2 libcups2 libdatrie1 libdbusmenu-glib4 libdbusmenu-gtk3-4 libepoxy0 liberation-fonts libgdk_pixbuf-2_0-0 libgraphite2-3 libgtk-3-0 libharfbuzz0 libindicator3-7 libjbig2 libjpeg8 libjson-glib-1_0-0 liblcms2-2 libpango-1_0-0 libpixman-1-0 librest-0_7-0 librsvg-2-2 libsoup-2_4-1 libthai-data libthai0 libtiff5 libwayland-client0 libwayland-cursor0 libwayland-egl1 libxcb-render0 libxcb-shm0 libxkbcommon0 lsb-release perl-CPAN-Changes perl-Devel-Symdump perl-Net-DBus perl-Pod-Coverage perl-Test-Pod perl-Test-Pod-Coverage perl-X11-Protocol perl-XML-Twig system-user-lp xdg-utils xkeyboard-config 71 new packages to install. Overall download size: 87.3 MiB. Already cached: 0 B. After the operation, additional 123.4 MiB will be used. Continue? [y/n/...? shows all options] (y): y Retrieving package expat-2.2.5-lp150.1.9.x86_64 Installing: brave-browser-dev-0.58.9-1.x86_64 .............................................[done] Additional rpm output: service: no such service atd update-alternatives: using /usr/bin/brave-browser-dev to provide /usr/bin/brave-browser (brave-browser) in auto mode vagrant-openSUSE-Leap:~ # vagrant@vagrant-openSUSE-Leap:~> which brave-browser /usr/bin/brave-browser ```

bbondy and others added 30 commits October 29, 2018 21:40

Upgrade from Chromium 70.0.3538.77 Chromium 71.0.3578.20

0f8fc16

Add Centos instructions

0b73e17

Tweak fedora instructions for dev to point to correct rpm rpo

Merge pull request brave#1898 from brave/71.0.3578.20

5b2614e

Upgrade from Chromium 70.0.3538.77 Chromium 71.0.3578.20

Merge pull request brave#1905 from posix4e/patch-1

9cd7080

Add Centos instructions

Upgrade from Chromium 71.0.3578.20 to 71.0.3578.31

6e1c945

Rename l10n to make strings less confusing

518e40b

Merge pull request brave#1942 from brave/71.0.3578.31

c09ca42

Upgrade from Chromium 71.0.3578.22 to 71.0.3578.31

Fix typo on Cent/RHEL

1b02957

Merge pull request brave#1946 from srirambv/linuxdoc

35bcfed

Fix typo on Cent/RHEL

Bump 0.59.1

5a084ed

Relating to brave#1953

Merge pull request brave#1954 from brave/0.59.1-bump

ad76f7b

Bump 0.59.1

Copy brave_behaviors.cc to chrome dir

a01f684

With this copying, we don't need to modify chrome/installer/setup/BUILD.gn to use our behaviors.cc file.

Merge pull request brave#1966 from brave/brave_behaviors

e50c886

Copy brave_behaviors.cc to chrome dir

Modify updatePatches to make patches in chrome/app/theme

5f6e37c

Some filies in chrome/app/theme should be patched.

Fix incorrect name of .list file for dev ubuntu.

187d696

Merge pull request brave#2005 from brave/adjust_update_patches

9fe9850

Modify updatePatches to make patches in chrome/app/theme

Removing cat from ubuntu install instructions.

ae1f13c

Add disable_webtorrent_extension option

2867ebd

Merge pull request brave#2045 from brave/disable_webtorrent_extension

6effbb8

Add disable_webtorrent_extension option

docs/installing-brave.rst: add brave-keyring package entry

0b22b59

This commit adds the brave-keyring package entry to the instructions for installing the release version of brave-browser References: brave#1826

Release notes for 0.56.x

a053be1

Fix brave#2056

Merge pull request brave#2074 from brave/release-notes-0.56.x

046128a

Release notes for 0.56.x

Merge pull request brave#2057 from brave/add-bravekeyring-docs

d5e544e

docs/installing-brave.rst: add brave-keyring package entry

Upgrade from Chromium 71.0.3578.31 to 71.0.3578.44

e63a895

Fix brave#2078

Merge pull request brave#2079 from brave/71.0.3578.44

67faa15

Upgrade from Chromium 71.0.3578.31 to 71.0.3578.44

Copy rewards l10n files when there are changes

b13f015

Fix brave#2108

Merge pull request brave#2109 from brave/copy-source-lang

31b1404

Copy rewards l10n files when there are changes

Adds support for unified rewards flag

e2953e6

Partial for brave#2102

Silence curl download progress in piped command

5572501

When curl is called without the -s flag it stalls on the download progress and does not add key.

Rename 'incognito' to 'private' when rebasing chromium strings

ff19704

Fix brave#738

simonhong and others added 12 commits November 15, 2018 13:07

Add src/build to python path

d8d4d3b

gn_helpers used by create-dist.py is there.

Upgrade from Chromium 71.0.3578.44 to 71.0.3578.53

ca00535

removed append from tee

aaad7cd

Merge pull request brave#2007 from hcaw/patch-1

cdfed96

Fix incorrect name of .list file for dev ubuntu.

Merge pull request brave#2184 from brave/fix-apt-install-docs

d17f51e

removed append from tee

Merge pull request brave#2178 from brave/71.0.3578.53

8abce39

Upgrade from Chromium 71.0.3578.44 to 71.0.3578.53

Merge pull request brave#2140 from adriandgr/patch-1

a959de3

Resolves brave#1981: silence curl download progress in piped command to add key

Merge pull request brave#2150 from brave/fix_create_dist_error_on_linux

14478b7

Add src/build to python path

Release notes for 0.56.x1 Hotfix 1

3ee53c5

Fix brave#2194

Merge pull request brave#2197 from brave/release-notes-0.56.x-hotfix1

f77c23b

Release notes for 0.56.x Hotfix 1

Release notes for 0.56.x Hotfix 2

d24db52

Fix brave#2217

Merge pull request brave#2218 from brave/release-notes-0.56.x-hotfix2

56463b3

Release notes for 0.56.x Hotfix 2

posix4e mentioned this pull request Nov 24, 2018

Opensuse repo unsigned brave/browser-laptop#11182

Closed

NejcZdovc and others added 5 commits November 26, 2018 05:36

Merge pull request brave#2112 from brave/rewards-flag

e4d6034

Adds support for unified rewards flag

Upgrade from Chromium 71.0.3578.53 to 71.0.3578.75

b48cf01

Merge pull request brave#2288 from brave/71.0.3578.75

dec3413

Upgrade from Chromium 71.0.3578.53 to 71.0.3578.75

Bump version to 0.60.1

20b3b04

Merge pull request brave#2293 from brave/bump-versions

37335d4

Bump master to 0.60.1

posix4e force-pushed the centos-install-instructions branch from fb651e2 to 8e4ec22 Compare November 30, 2018 16:38

posix4e force-pushed the centos-install-instructions branch from ad777da to 0652981 Compare December 8, 2018 04:28

posix4e closed this Oct 12, 2022

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add centos instructions #1

Add centos instructions #1

posix4e commented Nov 24, 2018

posix4e commented Nov 24, 2018

Add centos instructions #1

Add centos instructions #1

Conversation

posix4e commented Nov 24, 2018

Submitter Checklist:

Test Plan:

Reviewer Checklist:

posix4e commented Nov 24, 2018