WM320 Camera sensor board
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
The Camera sensor board contains a 12MPx CMOS sensor.
The known variants have only minor differences.
| Marking | Overview |
|---|---|
| P01088.04 | |
| P01088.06 | |
| P01088.07 |
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| Sony EXMOR 1/2.3” | 1 | 1/2.3” | Camera sensor; Effective pixels: 12.4M, total pixels: 12.76M. The model is most likely IMX078CQK. | |
| VUBI TI 53 | 1 | 16-lead 3x3 QFN-4444 | Texas Instruments TLV62130RGTR 3V to 17V 3A Step-Down Converter | description |
| BZN TI P 4910 | 1 | 12-lead 3x3 QFN-4242 | ||
| M160A 1511I 549AF | 1 | 16-lead 3x3 QFN-5353 | InvenSense accelerometer/gyroscope device (clone?) | |
| R18 | 1 | 5-pin SOT-23 | ||
| RC43 | 1 | 5-pin SOT-23 | ||
| H138 | 1 | 5-pin SOT-23 | ||
| TCR | 1 | 6-pin UQFN-33 |
No programmable components exist on the board.
The board contains one connector:
| Marking | Overview |
|---|---|
| 61-pin FFC con. | Flex flat cable connector for sensor output transmission to the Gimbal top board. |
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| VDD12 | |
| 3V6 | |
| GND | |
| MPU_SCK | |
| SDA_MPU | |
| CS_MPU | |
| VDD18 | 1.8V power for CMOS image sensor. |
| INCK | |
| 3V3MPU | |
| GND | |
| GND_E | |
| 15V | |
| GND |
Top of the v4 board:
Bottom of the v4 board:
Top of the v6 board:
Bottom of the v6 board:
Top of the v7 board:
Bottom of the v7 board:
The following schematics were made by enthusiasts: