Skip to content

GL300 5G8 RF board

Jump to bottom
mefistotelis edited this page Dec 24, 2017 · 5 revisions

Table of Contents

Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics

Function

The board contains 5.8GHz Radio Frequency components of the Lightbridge transmission system. It is separated from the main board to reduce interference and allow separate shielding for the high frequency components.

Variants

There are multiple versions of the board.

Marking Overview
WM610_GRCP_5G8_V1

Parts

Version WM610_GRCP_5G8_V? components

Marking Amt. Pkg. Function Specification
TODO

Programming

TODO

External interfaces

Connectors on the board are:

Marking Overview
2x8pin Pin Header Con. Interboard Pin Header connector to the Main board

Service interfaces

The following service pads exist on this board:

Marking Overview
TODO

Board view

Top of a WM610_GRCP_5G8_V1 board from GL658a:

GL658a 5G8 rf board v1 A top

Bottom of the WM610_GRCP_5G8_V1 board from GL658a:

GL658a 5G8 rf board v1 A bottom

Top of a WM610_GRCP_5G8_V1 board from GL658b:

GL658b 5G8 rf board v1 B top

Bottom of the WM610_GRCP_5G8_V1 board from GL658b:

GL658a 5G8 rf board v1 B bottom

Schematics

No schematics available.

This page is created by drone enthusiasts for drone enthusiasts.

If you see a mistake, or you know more about specific subject, or you see an area for improvement for the wiki - create an issue in this project and attach your patch (or describe the change you propose).

Clone this wiki locally