@tzarc's custom keyboard designs.
-
Updated
Feb 17, 2024 - HTML
@tzarc's custom keyboard designs.
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
Achoo uses a Raspberry Pi to predict if my son will need his inhaler on any given day using weather, pollen, and air quality data. If the prediction for a given day is above a specified threshold, the Pi will email his school nurse, and myself, notifying her that he may need preemptive treatment. Community-sourced health monitoring!
Microphone Pre-amplifier
🏠 My Home Assistant configuration and documentation. More info below.
Placa Franzininho DIY - Placa compatível com Arduino no formato DIY para oficinas de soldagem
Ghoul Planck-like MicroMod keyboard
Electronic load 2022
Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup. Easy to replicate and compatible with virtually every electronic module.
Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
a DIY flat christmas decoration with a ATtiny25, 20 led´s and a coin cell battery
Through-hole version of Mutable Instruments Frames
A linear adjustable power supply for modular synthesizers in the Eurorack format. It's easy to build and outputs more than 1A at +12V, -12V and +5V.
A simple but versatile bus board for modular synthesizers in the Eurorack format. Cheap and easy to build and with many slots for connecting modules with both 10-pin and 16-pin connectors.
A basic USB mouse PCB based on the PAW3526D8-FJY2 Sensor.
Main site for HackLand - the Auckland Hackspace
Add a description, image, and links to the diy topic page so that developers can more easily learn about it.
To associate your repository with the diy topic, visit your repo's landing page and select "manage topics."