Skip to content

NI RFmx LTE SEM Fetch Functions

Dane Stull edited this page Feb 28, 2022 · 2 revisions

SEM Fetch Functions

RFmxLTE_SEMFetchTotalAggregatedPower

int32 __stdcall RFmxLTE_SEMFetchTotalAggregatedPower (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64* totalAggregatedPower);

Purpose

Returns the sum of powers of all subblocks.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"signal::sig1"
"result::r1"
"signal::sig1/result::r1"
You can use the RFmxLTE_BuildSignalString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
totalAggregatedPower float64* Returns the sum of powers of all the subblocks. This value includes the power in the inter-carrier gaps within a subblock, but it does not include the power in the subblock gaps.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchMeasurementStatus

int32 __stdcall RFmxLTE_SEMFetchMeasurementStatus (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int32* measurementStatus);

Purpose

Returns the overall measurement status based on the standard mask type that you configure.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"signal::sig1"
"result::r1"
"signal::sig1/result::r1"
You can use the RFmxLTE_BuildSignalString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
measurementStatus int32* Returns the measurement status indicating whether the power before and after the burst is within the standard defined limit.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_FAIL (0) Indicates that the measurement has failed.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_PASS (1) Indicates that the measurement has passed.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchSubblockMeasurement

int32 __stdcall RFmxLTE_SEMFetchSubblockMeasurement (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64* subblockPower, float64* integrationBandwidth, float64* frequency);

Purpose

Returns the power, integration bandwidth and center frequency of the subblock. Use "subblock<n>" as the selector string to read results from this function.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0"
"signal::sig1/subblock0"
"result::r1/subblock0"
"signal::sig1/result::r1/subblock0"
You can use the RFmxLTE_BuildSubblockString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
subblockPower float64* Returns the sum of powers of all the frequency bins over the integration bandwidth of the subblock.
integrationBandwidth float64* Returns the integration bandwidth of the subblock. Integration bandwidth is the span from left edge of the leftmost carrier to the right edge of the rightmost carrier within a subblock
frequency float64* Returns the absolute center frequency of the subblock. This value is the center of the subblock integration bandwidth.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchComponentCarrierMeasurement

int32 __stdcall RFmxLTE_SEMFetchComponentCarrierMeasurement (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64* absoluteIntegratedPower, float64* relativeIntegratedPower);

Purpose

Returns the absolute power and relative power measured in the component carrier. The relative power is relative to subblock power. Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to read results from this function.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, subblock number, and carrier number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0/carrier0"
"signal::sig1/subblock0/carrier0"
"result::r1/subblock0/carrier0"
"signal::sig1/result::r1/subblock0/carrier0"
You can use the RFmxLTE_BuildCarrierString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
absoluteIntegratedPower float64* Returns the power measured over the integration bandwidth of the carrier.
relativeIntegratedPower float64* Returns the component carrier power relative to its subblock power.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchLowerOffsetMargin

int32 __stdcall RFmxLTE_SEMFetchLowerOffsetMargin (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int32* measurementStatus, float64* margin, float64* marginFrequency, float64* marginAbsolutePower, float64* marginRelativePower);

Purpose

Returns the measurement status, margin, frequency at margin, and the absolute and relative powers at the margin for lower offset segments. The relative power is relative to the total aggregated power. Use "offset<n>" or "subblock<n>/offset<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, subblock number, and offset number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0/offset0"
"signal::sig1/subblock0/offset0"
"signal::sig1/result::r1/subblock0/offset0"
"result::r1/subblock0/offset0"
You can use the RFmxLTE_BuildOffsetString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
measurementStatus int32* Returns the measurement status indicating whether the power before and after the burst is within the standard defined limit.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_FAIL (0) Indicates that the measurement has failed.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_PASS (1) Indicates that the measurement has passed.
margin float64* Returns the margin from the standard-defined absolute limit mask for the lower (negative) offset. Margin is defined as the minimum difference between the spectrum and the limit mask. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginFrequency float64* Returns the frequency at which the margin occurs in the lower (negative) offset. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginAbsolutePower float64* Returns the power at which the margin occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginRelativePower float64* Returns the power at which the margin occurs in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchLowerOffsetPower

int32 __stdcall RFmxLTE_SEMFetchLowerOffsetPower (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64* absoluteIntegratedPower, float64* relativeIntegratedPower, float64* absolutePeakPower, float64* peakFrequency, float64* relativePeakPower);

Purpose

Returns the total absolute and relative powers, peak, absolute, and relative powers, and the frequency at the peak absolute power of the lower offset segment. The relative power is relative to the total aggregated power. Use "offset<n>" or "subblock<n>/offset<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, subblock number, and offset number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0/offset0"
"signal::sig1/subblock0/offset0"
"signal::sig1/result::r1/subblock0/offset0"
"result::r1/subblock0/offset0"
You can use the RFmxLTE_BuildOffsetString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
absoluteIntegratedPower float64* Returns the lower (negative) offset segment power. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativeIntegratedPower float64* Returns the power in the lower (negative) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
absolutePeakPower float64* Returns the peak power in the lower (negative) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
peakFrequency float64* Returns the frequency at which the peak power occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativePeakPower float64* Returns the peak power in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchUpperOffsetMargin

int32 __stdcall RFmxLTE_SEMFetchUpperOffsetMargin (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int32* measurementStatus, float64* margin, float64* marginFrequency, float64* marginAbsolutePower, float64* marginRelativePower);

Purpose

Returns the measurement status, margin, frequency at margin, and absolute and relative powers at margin for upper offset segments. The relative power is relative to total aggregated power. Use "offset<n>" or "subblock<n>/offset<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, subblock number, and offset number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0/offset0"
"signal::sig1/subblock0/offset0"
"signal::sig1/result::r1/subblock0/offset0"
"result::r1/subblock0/offset0"
You can use the RFmxLTE_BuildOffsetString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
measurementStatus int32* Returns the measurement status indicating whether the power before and after the burst is within the standard defined limit.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_FAIL (0) Indicates that the measurement has failed.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_PASS (1) Indicates that the measurement has passed.
margin float64* Returns the margin from the standard defined absolute limit mask for upper offset. Margin is defined as the minimum difference between the spectrum and the limit mask. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginFrequency float64* Returns the frequency at which the margin occurs in the upper offset. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginAbsolutePower float64* Returns the power at which the margin occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginRelativePower float64* Returns the power at which the margin occurs in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchUpperOffsetPower

int32 __stdcall RFmxLTE_SEMFetchUpperOffsetPower (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64* absoluteIntegratedPower, float64* relativeIntegratedPower, float64* absolutePeakPower, float64* peakFrequency, float64* relativePeakPower);

Purpose

Returns the total absolute and relative powers, peak, absolute, and relative powers, and frequency at peak absolute power of upper offset segment. The relative power is relative to total aggregated power. Use "offset<n>" or "subblock<n>/offset<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, subblock number, and offset number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0/offset0"
"signal::sig1/subblock0/offset0"
"signal::sig1/result::r1/subblock0/offset0"
"result::r1/subblock0/offset0"
You can use the RFmxLTE_BuildOffsetString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
Output
Name Type Description
absoluteIntegratedPower float64* Returns the upper offset segment power. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativeIntegratedPower float64* Returns the power in the upper offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
absolutePeakPower float64* Returns the peak power in the upper offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
peakFrequency float64* Returns the frequency at which the peak power occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativePeakPower float64* Returns the peak power in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchComponentCarrierMeasurementArray

int32 __stdcall RFmxLTE_SEMFetchComponentCarrierMeasurementArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64 absoluteIntegratedPower[], float64 relativeIntegratedPower[], int32 arraySize, int32* actualArraySize);

Purpose

Returns an array of the absolute powers and relative powers measured in the component carriers. The relative power is relative to subblock power. Use "subblock<n>" as the selector string to read results from this function.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0"
"signal::sig1/subblock0"
"result::r1/subblock0"
"signal::sig1/result::r1/subblock0"
You can use the RFmxLTE_BuildSubblockString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
arraySize int32 Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.
Output
Name Type Description
absoluteIntegratedPower float64[] Returns the array of power measured in the subblock.
relativeIntegratedPower float64[] Returns the array of the sum of powers of all the frequency bins over the integration bandwidth of the component carrier power relative to its subblock power.
actualArraySize int32* Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchLowerOffsetMarginArray

int32 __stdcall RFmxLTE_SEMFetchLowerOffsetMarginArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int32 measurementStatus[], float64 margin[], float64 marginFrequency[], float64 marginAbsolutePower[], float64 marginRelativePower[], int32 arraySize, int32* actualArraySize);

Purpose

Returns an array of measurement statuses, margins, frequencies at margins, and absolute and relative powers at margins for lower offset segments. The relative power is relative to the total aggregated power. Use "subblock<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0"
"signal::sig1/subblock0"
"result::r1/subblock0"
"signal::sig1/result::r1/subblock0"
You can use the RFmxLTE_BuildSubblockString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
arraySize int32 Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.
Output
Name Type Description
measurementStatus int32[] Returns the array of the measurement status indicating whether the power before and after the burst is within the standard defined limit.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_FAIL (0) Indicates that the measurement has failed.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_PASS (1) Indicates that the measurement has passed.
margin float64[] Returns the array of margins from the standard-defined absolute limit mask for the lower (negative) offset. Margin is defined as the minimum difference between the spectrum and the limit mask. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginFrequency float64[] Returns the array of frequency at which the margin occurs in the lower (negative) offset. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginAbsolutePower float64[] Returns the array of power at which the margin occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginRelativePower float64[] Returns the array of powers at which the margin occurs in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
actualArraySize int32* Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchLowerOffsetPowerArray

int32 __stdcall RFmxLTE_SEMFetchLowerOffsetPowerArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64 absoluteIntegratedPower[], float64 relativeIntegratedPower[], float64 absolutePeakPower[], float64 peakFrequency[], float64 relativePeakPower[], int32 arraySize, int32* actualArraySize);

Purpose

Returns an array of total absolute and relative powers, peak, absolute, and relative powers, and frequencies at peak absolute powers of lower offset segments. The relative power is relative to total aggregated power. Use "subblock<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0"
"signal::sig1/subblock0"
"result::r1/subblock0"
"signal::sig1/result::r1/subblock0"
You can use the RFmxLTE_BuildSubblockString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
arraySize int32 Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.
Output
Name Type Description
absoluteIntegratedPower float64[] Returns the array of lower (negative) offset segment powers. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativeIntegratedPower float64[] Returns the array of powers in the lower (negative) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
absolutePeakPower float64[] Returns the array of peak powers in the lower (negative) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
peakFrequency float64[] Returns the array of frequency at which the peak power occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativePeakPower float64[] Returns the array of peak power in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
actualArraySize int32* Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchUpperOffsetMarginArray

int32 __stdcall RFmxLTE_SEMFetchUpperOffsetMarginArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int32 measurementStatus[], float64 margin[], float64 marginFrequency[], float64 marginAbsolutePower[], float64 marginRelativePower[], int32 arraySize, int32* actualArraySize);

Purpose

Returns an array of measurement statuses, margins, frequencies at margins, and absolute and relative powers at margins for upper offset segments. The relative power is relative to total aggregated power. Use "subblock<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0"
"signal::sig1/subblock0"
"result::r1/subblock0"
"signal::sig1/result::r1/subblock0"
You can use the RFmxLTE_BuildSubblockString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
arraySize int32 Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.
Output
Name Type Description
measurementStatus int32[] Returns the array of the measurement status indicating whether the power before and after the burst is within the standard defined limit.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_FAIL (0) Indicates that the measurement has failed.
RFMXLTE_VAL_SEM_MEASUREMENT_STATUS_PASS (1) Indicates that the measurement has passed.
margin float64[] Returns the array of margins from the standard defined absolute limit mask for upper offset. The margin is defined as the minimum difference between the spectrum and the limit mask. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginFrequency float64[] Returns the array of frequency at which the margin occurs in the upper offset. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginAbsolutePower float64[] Returns the array of power at which the margin occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the SEM results lower offset start frequency and SEM results lower offset stop frequency are updated, and the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
marginRelativePower float64[] Returns the array of powers at which the margin occurs in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
actualArraySize int32* Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchUpperOffsetPowerArray

int32 __stdcall RFmxLTE_SEMFetchUpperOffsetPowerArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64 absoluteIntegratedPower[], float64 relativeIntegratedPower[], float64 absolutePeakPower[], float64 peakFrequency[], float64 relativePeakPower[], int32 arraySize, int32* actualArraySize);

Purpose

Returns an array of total absolute and relative powers, peak, absolute, and relative powers, and frequencies at peak absolute powers of upper offset segments. The relative power is relative to total aggregated power. Use "subblock<n>" as the selector string to read results from this function. Refer to the LTE Uplink Spectral Emission Mask) and LTE Downlink Spectral Emission Mask topics for more information.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"subblock0"
"signal::sig1/subblock0"
"result::r1/subblock0"
"signal::sig1/result::r1/subblock0"
You can use the RFmxLTE_BuildSubblockString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
arraySize int32 Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.
Output
Name Type Description
absoluteIntegratedPower float64[] Returns the array of upper offset segment powers. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativeIntegratedPower float64[] Returns the array of powers in the upper offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER) attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
absolutePeakPower float64[] Returns the array of peak powers in the upper offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
peakFrequency float64[] Returns the array of frequency at which the peak power occurs in the upper (positive) offset segment. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
relativePeakPower float64[] Returns the array of peak power in the upper (positive) offset segment relative to the value returned by the RFMXLTE_ATTR_SEM_RESULTS_TOTAL_AGGREGATED_POWER attribute. For the intra-band noncontiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.
actualArraySize int32* Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

RFmxLTE_SEMFetchSpectrum

int32 __stdcall RFmxLTE_SEMFetchSpectrum (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64* x0, float64* dx, float32 spectrum[], float32 compositeMask[], int32 arraySize, int32* actualArraySize);

Purpose

Fetches the spectrum used for the SEM measurement.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize) function.
selectorString char[] Specifies a selector string) comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used.
Example:
"signal::sig1"
"result::r1"
"signal::sig1/result::r1"
You can use the RFmxLTE_BuildSignalString) function to build the selector string.
timeout float64 Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete.
arraySize int32 Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.
Output
Name Type Description
x0 float64* Returns the start frequency of the channel. This value is expressed in Hz.
dx float64* Returns the frequency bin spacing. This value is expressed in Hz.
spectrum float32[] Returns the array of averaged power measured at each frequency bin. This value is expressed in dBm.
compositeMask float32[] Returns the array of composite mask used for the channel.
actualArraySize int32* Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError) function.

The general meaning of the status code is as follows:
Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors

Table of Contents

Internal Development

Creating and Setting Up a gRPC Server

Server Security Support

Creating a gRPC Client

gRPC Client Examples

Session Utilities API Reference

Driver Documentation

gRPC API Differences From C API

Sharing Driver Sessions Between Clients

C API Docs
NI-DAQmx
NI-DCPOWER
NI-DIGITAL PATTERN DRIVER
NI-DMM
NI-FGEN
NI-FPGA
NI-RFmx Bluetooth
NI-RFmx NR
NI-RFmx WCDMA
NI-RFmx GSM
NI-RFmx CDMA2k
NI-RFmx Instr
NI-RFmx LTE
NI-RFmx SpecAn
NI-RFmx TD-SCDMA
NI-RFmx WLAN
NI-RFSA
NI-RFSG
NI-SCOPE
NI-SWITCH
NI-TCLK
NI-XNET
Clone this wiki locally