Skip to content

NI FGEN 5401 5411 5431

Palash Khare edited this page Jun 3, 2021 · 1 revision

5401 5411 5431

NIFGEN_ATTRIBUTE_FILTER_CORRECTION_FREQUENCY

Specific Attribute

Numeric Value Data Type Access Applies to Coercion High-Level Functions
1150104 ViReal64 R/W N/A None None

Description

Controls the filter correction frequency of the analog filter. This property can correct for the ripples in the analog filter frequency response at the frequency specified. When using the Standard Waveform output mode, this property should be set to the same frequency as the standard waveform. To disable filter correction, set this property to 0.

Units: hertz

Default Value: 0

NIFGEN_ATTRIBUTE_TRIGGER_SOURCE

IviFgenTrigger Attribute

Numeric Value Data Type Access Applies to Coercion High-Level Functions
1250302 ViInt32 R/W Channel None [OBSOLETE] niFgen_ConfigureTriggerSource

Description

Controls which trigger source the signal generator uses.

After you call the niFgen_InitiateGeneration function, the signal generator waits for the trigger that you specify in the triggerSource parameter in the niFgen_ConfigureTriggerSource function. After the signal generator receives a trigger, it produces the number of cycles that you specify in the NIFGEN_ATTRIBUTE_CYCLE_COUNT attribute.

This attribute is also the source for the trigger in the other trigger modes as specified by the NIFGEN_ATTRIBUTE_TRIGGER_MODE attribute.

Defined Values

NIFGEN_VAL_IMMEDIATE Immediate—The signal generator does not wait for a trigger of any kind.
NIFGEN_VAL_EXTERNAL External—The signal generator waits for a trigger on the external trigger input.
NIFGEN_VAL_PFI_0 Specifies that the generator use the PFI 0 trigger source.
NIFGEN_VAL_PFI_1 Specifies that the generator use the PFI 1 trigger source.
NIFGEN_VAL_PFI_2 Specifies that the generator use the PFI 2 trigger source.
NIFGEN_VAL_PFI_3 Specifies that the generator use the PFI 3 trigger source.
NIFGEN_VAL_SOFTWARE_TRIG Software Trigger—The signal generator waits until you call the niFgen Send Software Trigger VI.
NIFGEN_VAL_RTSI_0 Specifies that the generator use the RTSI line 0 trigger source.
NIFGEN_VAL_RTSI_1 Specifies that the generator use the RTSI line 1 trigger source.
NIFGEN_VAL_RTSI_2 Specifies that the generator use the RTSI line 2 trigger source.
NIFGEN_VAL_RTSI_3 Specifies that the generator use the RTSI line 3 trigger source.
NIFGEN_VAL_RTSI_4 Specifies that the generator use the RTSI line 4 trigger source.
NIFGEN_VAL_RTSI_5 Specifies that the generator use the RTSI line 5 trigger source.
NIFGEN_VAL_RTSI_6 Specifies that the generator use the RTSI line 6 trigger source.
NIFGEN_VAL_RTSI_7 Specifies that the generator use the RTSI line 7 trigger source.
NIFGEN_VAL_PXI_STAR Specifies that the generator use the PXI star trigger source.
NIFGEN_VAL_TTL0 Specifies that the generator use the PXI TRIG0 or VXI TTL0 trigger source.
NIFGEN_VAL_TTL1 Specifies that the generator use the PXI TRIG1 or VXI TTL1 trigger source.
NIFGEN_VAL_TTL2 Specifies that the generator use the PXI TRIG2 or VXI TTL2 trigger source.
NIFGEN_VAL_TTL3 Specifies that the generator use the PXI TRIG3 or VXI TTL3 trigger source.
NIFGEN_VAL_TTL4 Specifies that the generator use the PXI TRIG4 or VXI TTL4 trigger source.
NIFGEN_VAL_TTL5 Specifies that the generator use the PXI TRIG5 or VXI TTL5 trigger source.
NIFGEN_VAL_TTL6 Specifies that the generator use the PXI TRIG6 or VXI TTL6 trigger source.

Default Value: NIFGEN_VAL_IMMEDIATE

NIFGEN_ATTRIBUTE_SYNCHRONIZATION

Specific Attribute

Numeric Value Data Type Access Applies to Coercion High-Level Functions
1150111 ViInt32 R/W N/A None None

Description

Specifies the source of the synchronization signal to use.

Note:  You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.

Defined Values

NIFGEN_VAL_NONE Specifies that the generator use no synchronization source.
NIFGEN_VAL_RTSI_0 Specifies that the generator use RTSI 0 as the synchronization source.
NIFGEN_VAL_RTSI_1 Specifies that the generator use RTSI 1 as the synchronization source.
NIFGEN_VAL_RTSI_2 Specifies that the generator use RTSI 2 as the synchronization source.
NIFGEN_VAL_RTSI_3 Specifies that the generator use RTSI 3 as the synchronization source.
NIFGEN_VAL_RTSI_4 Specifies that the generator use RTSI 4 as the synchronization source.
NIFGEN_VAL_RTSI_5 Specifies that the generator use RTSI 5 as the synchronization source.
NIFGEN_VAL_RTSI_6 Specifies that the generator use RTSI 6 as the synchronization source.
NIFGEN_VAL_TTL0 Specifies that the generator use PXI TRIG0 or VXI TTL0 as the synchronization source.
NIFGEN_VAL_TTL1 Specifies that the generator use PXI TRIG1 or VXI TTL1 as the synchronization source.
NIFGEN_VAL_TTL2 Specifies that the generator use PXI TRIG2 or VXI TTL2 as the synchronization source.
NIFGEN_VAL_TTL3 Specifies that the generator use PXI TRIG3 or VXI TTL3 as the synchronization source.
NIFGEN_VAL_TTL4 Specifies that the generator use PXI TRIG4 or VXI TTL4 as the synchronization source.
NIFGEN_VAL_TTL5 Specifies that the generator use PXI TRIG5 or VXI TTL5 as the synchronization source.
NIFGEN_VAL_TTL6 Specifies that the generator use PXI TRIG6 or VXI TTL6 as the synchronization source.

Default Value: NIFGEN_VAL_NONE

NIFGEN_ATTRIBUTE_VIDEO_WAVEFORM_TYPE

Specific Attribute

Numeric Value Data Type Access Applies to Coercion High-Level Functions
1150216 ViInt32 R/W N/A None None

Description

Selects which waveform type the NI 5431 generates. Setting this attribute ensures that the crystal is set to the proper frequency.

Note:  You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.

Defined Values

NIFGEN_VAL_PAL_B PAL B video type
NIFGEN_VAL_PAL_D PAL D video type
NIFGEN_VAL_PAL_G PAL G video type
NIFGEN_VAL_PAL_H PAL H video type
NIFGEN_VAL_PAL_I PAL I video type
NIFGEN_VAL_PAL_M PAL M video type
NIFGEN_VAL_PAL_N PAL N video type
NIFGEN_VAL_NTSC_M NTSC M video type

Table of Contents

Internal Development

Creating and Setting Up a gRPC Server

Server Security Support

Creating a gRPC Client

gRPC Client Examples

Session Utilities API Reference

Driver Documentation

gRPC API Differences From C API

Sharing Driver Sessions Between Clients

C API Docs
NI-DAQmx
NI-DCPOWER
NI-DIGITAL PATTERN DRIVER
NI-DMM
NI-FGEN
NI-FPGA
NI-RFmx Bluetooth
NI-RFmx NR
NI-RFmx WCDMA
NI-RFmx GSM
NI-RFmx CDMA2k
NI-RFmx Instr
NI-RFmx LTE
NI-RFmx SpecAn
NI-RFmx TD-SCDMA
NI-RFmx WLAN
NI-RFSA
NI-RFSG
NI-SCOPE
NI-SWITCH
NI-TCLK
NI-XNET
Clone this wiki locally