Releases: VERITAS-Observatory/EventDisplay_v4
Eventdisplay - beta release v491-beta.2
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
v491-beta2 is a pre-release intended for testing. Do not use it for science analysis.
This is a major release with significant changes in the reconstruction algorithm and important bug fixes.
Improvements
- significant improved high-energy reconstruction by
- allow to fill lookup tables with loss factors larger than those used in the
evndisp
stage. - allow to re-analyse events with loss factors larger than those used in the
evndisp
stage. - improved dispBDT reconstruction with much better hyper parameter (derived from optimization on CTAO simulations)
- added dispBDT energy reconstruction to allow to reconstruct events with large loss factors
- improved BDT gamma/hadron separation; addition of DispAbsSumWeigth variable for gamma/hadron separation
- allow to fill lookup tables with loss factors larger than those used in the
- telescope-dependent pedestal variations are now taken correctly into account in lookup table code
- before: tables where accessed using the average pedvars
- this change requires many and deep changes in both lookup table writing and reading codes.
What's Changed
- v491-dev4 by @GernotMaier in #276
Full Changelog: v491-beta.1...v491-beta.2
Eventdisplay - beta release v491-beta.1
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
v491-beta1 is a pre-release intended for testing. Do not use it for science analysis.
This is a major release with significant changes in the reconstruction algorithm and important bug fixes.
Improvements:
- significant improved high-energy reconstruction by
- allow to fill lookup tables with loss factors larger than those used in the
evndisp
stage. - allow to re-analyse events with loss factors larger than those used in the
evndisp
stage. - improved dispBDT reconstruction with much better hyper parameter (derived from optimization on CTAO simulations)
- added dispBDT energy reconstruction to allow to reconstruct events with large loss factors
- improved BDT gamma/hadron separation; addition of DispAbsSumWeigth variable for gamma/hadron separation
- allow to fill lookup tables with loss factors larger than those used in the
Bug fixes:
- replaced 'closes-bin' algorithm for BDT gamma/hadron tree selection by interpolation in zenith. This fixes the issue reported in ELOG 2597, with clearly visible effects from the binning of the BDTs in zenith angle.
What's Changed
- v490.9 dev1 - improve selection of images on mscw stage; bug fix in event selection for dispAnalyzer by @GernotMaier in #254
- v490.9-dev2 - removal of size2 by @GernotMaier in #265
- fix reading of size by @GernotMaier in #266
- v490.9-dev4 - minor fixes by @GernotMaier in #267
- Bump docker/build-push-action from 5 to 6 by @dependabot in #268
- increase precision of MJD printout to be useful. by @GernotMaier in #269
- improved help for logFile tool by @GernotMaier in #270
- BDT disp training for different loss cuts by @GernotMaier in #271
- Update to astyle 3.6 by @GernotMaier in #273
- v491 dev1 - plotting tool for mscw variables. by @GernotMaier in #272
- v491 dev2 - Adding BDTdispEnergy by @GernotMaier in #274
- v491-dev 3: MVA interpolation fix by @GernotMaier in #275
Full Changelog: v490.8...v491-beta.1
Eventdisplay - version v490.8
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a maintenance release with no relevant updates for users and an intermediate release (no associated releases of scripts or auxiliary files).
For details on how to install the release, see this readme.
What's Changed
- Remove leftover from CTA by @GernotMaier in #262
- code cleanup by @GernotMaier in #264
Full Changelog: v490.7...v490.8
Eventdisplay - version v490.7
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a minor release with small improvements:
- new application
printCrabSensitivity
for easier access to sensitivity vs time estimations from Crab fluxs - improved docker file
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
For details on how to install the release, see this readme.
What's Changed
- v490.7 preprocessing docker with reduced docker image size by @GernotMaier in #260
- Add a simple tool to printout Crab sensitivity by @GernotMaier in #261
Full Changelog: v490.6...v490.7
Eventdisplay - version v490.6
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a minor bug fix bug fix release addressing the following issues:
- docker metadata
- mscw quality cuts
- DispAnalyzer - correct fui cut applied (this was a bug: loss value was used for direction reconstruction)
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
For details on how to install the release, see this readme.
What's Changed
- In radial acceptance, skip runs with missing multiplicity by @GernotMaier in #255
- v490.6 dev2 docker updates by @GernotMaier in #256
- v490.6 - add additional cuts in mscw for event quality by @GernotMaier in #257
- v490.6-dev3 container metadata updates by @GernotMaier in #258
Full Changelog: v490.5...v490.6
Eventdisplay - version v490.5
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a minor bug fix bug fix release addressing the following issues:
- fix compilation issue with newer root version (mathmore package)
- improve Crab spectrum plotting
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
- Eventdisplay v490.5
- Eventdisplay_AnalysisScripts_VTS v490.5
- Eventdisplay_AnalysisFiles_VTS v490.5 (private repository)
For details on how to install the release, see this readme.
What's Changed
- v490.5-dev1 by @GernotMaier in #249
Full Changelog: v490.4...v490.5
Eventdisplay - version v490.4
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is an important bug fix bug fix release for v490.3 addressing the following issues:
- relative gains and time offsets are not written to output files for flasher analysis
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
- Eventdisplay v490.4
- Eventdisplay_AnalysisScripts_VTS v490.4
- Eventdisplay_AnalysisFiles_VTS v490.3 (private repository; note that v490.3 is the correct version for the analysis files)
For details on how to install the release, see this readme.
What's Changed
- critical bug fix in flasher gain calculation by @GernotMaier in #248
Full Changelog: v490.3...v490.4
Eventdisplay - version v490.3
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a very minor bug fix release for v490.2 addressing the following issues:
- fix compilation issues for VTS.analyseMuonRings
- improved printout for reflected region positions and sky map center
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
- Eventdisplay v490.3
- Eventdisplay_AnalysisScripts_VTS v490.3
- Eventdisplay_AnalysisFiles_VTS v490.3 (private repository)
For details on how to install the release, see this readme.
What's Changed
- v490.3 dev1 - minor improvements by @GernotMaier in #244
- v490.3-dev by @GernotMaier in #246
Full Changelog: v490.2...v490.3
Eventdisplay - version v490.2
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a minor bug fix release for v490.1 addressing the following issues:
- Epochs where not updated correctly when using
printRunParameter
with the-updated-runinfo
options.
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
- Eventdisplay v490.2
- Eventdisplay_AnalysisScripts_VTS v490.2
- Eventdisplay_AnalysisFiles_VTS v490.2 (private repository)
For details on how to install the release, see this readme.
What's Changed
- v490.2 - dev1 by @GernotMaier in #239
- bug fix in updating epoch string by @GernotMaier in #240
Full Changelog: v490.1...v490.2
Eventdisplay - version v490.1
Eventdisplay is a reconstruction and analysis pipeline for data of the VERITAS Imaging Atmospheric Cherenkov Telescopes (IACT).
This is a minor bug fix release for v490.0 addressing the following issues:
- adapt radial acceptance code to new directory structure of gamma/hadron BDTs (elog 2427)
- replace in Display the plotting average by sum of traces (see ELog 2403)
- minor axes changes for plotting of Crab spectra
- add printout on downloading status for
bin/VTS.getRunListFromDB
- bug fix in pedvar calculation
Full Changelog: v490.0...v490.1
The usage of Eventdisplay requires code, scripts, and analysis files. For this release, the corresponding repositories are:
- Eventdisplay v490.1
- Eventdisplay_AnalysisScripts_VTS v490.1
- Eventdisplay_AnalysisFiles_VTS v490.1a (private repository)
For details on how to install the release, see this readme.