-
Notifications
You must be signed in to change notification settings - Fork 4
Iamforce2–User manual Launchpad Mini MK3 implementation
(c) TheKikGen, 2023
| LPMK3 key combination | Function | Akai Force key or action |
|---|---|---|
| UP | Controller shift function (CTSHIFT). The UP button is used as the "controller SHIFT" button. This is not the same "shift" as the one present on the MPC, or Force. |
(none) |
| DOWN | (none) | DOWN Go dow in the clip matrix |
| CTSHIFT+ DOWN | (none) | UP : go up in the clip matrix |
| LEFT | (none) | COPY |
| CTSHIFT + LEFT | (none) | LEFT Go left in the clip matrix |
| RIGHT | (none) | DELETE |
| CTSHIFT + RIGHT | (none) | RIGHT Go right in the clip matrix |
|
STOP SOLO MUTE (SSM) |
When the SSM button is holded, the 2 column lines are showed at the bottom of the pad matrix, so you can select a track and mute/solo/rec arm/stop clip with pads of the second line. See Force documentation for further informations. | (none) |
| SSM + any pad on first line of pad matrix |
EDIT TRACK This will edit the corresponding track (e.g. will show the plugin edit screen) |
|
| SSM + LAUNCH 7 |
When holding the SSM button and pressing the launch button of the 7th line, you will change the solo/mute modes alternatively. Red for rec Arm, Green for stop Clip, Orange for mute track, Blue for track solo. In that mode, you can also hold the SHIFT button on the MPC to show parameters and transpose function. |
REC ARM STOP CLIP SOLO MUTE |
| CTSHIFT + SSM | LAUNCH 8 | |
| LAUNCH 1-7 | LAUNCH 1-7 | |
| CTSHIFT + LAUNCH 6 | STOP ALL CLIPS | |
| CTSHIFT + LAUNCH 5 |
SHIFT last lines rather than solo modes (same behaviour as Force). You can use that to set metronome on/off or transpose the keyboard for example. |
|
| CTSHIFT + LAUNCH 4 |
Lock the SSM mode ON/OFF. show columns pads permanently. |
|
| SESSION | LAUNCH | |
| CTSHIFT + SESSION | MASTER | |
| USER | STEP SEQ | |
| KEYS | NOTE |