-
Notifications
You must be signed in to change notification settings - Fork 2k
Open for 2019.10
Ken Bannister edited this page Sep 17, 2019
·
2 revisions
Open PRs for milestone Release 2019.10, as of 2019-09-17
- contikimac: a ContikiMAC compatible netdev layer (#9478)
- core: Add THREAD_FLAG_IRQ_SERVICED (#9284)
- core: introduce crossfile arrays (xfa), refactored (#9105)
- event: event_wait: check for invalid event (#10453)
- saul_adc: Add scaling option (#9810)
- sys/arduino: Added Wire (I2C) interface (#10592)
- sys/shell: add heap command (#10953)
- sys/shell: correctly detect and handle long lines (#10635)
- usbus: Add CDC-ACM (Serial console) function (#11085)
- WIP newlib.mk: fix regressions and global cleanups, tracking evolutions of newlib.mk (#9512)
- WIP/POC: start a test where xtimer uses a fake 'periph_timer' mock implementation (#10321)
- xtimer: check in xtimer_mutex_lock_timeout timeout callback if a thread blocked on mutex (#10872)
- pthread: Make pthread_tls into a submodule (#10200)
- ifconfig: Add manual CCA operation (#10649)
- emcute: fix length field calculation (#11958)
- emcute: fix payload copy error for emcute_pub (#11957)
- gnrc_lorawan: add initial support for GNRC based LoRaWAN stack (v2) (#11022)
- gnrc_netif: Add support for internal event loop (#9326)
- net/coap: Block optimizations (#11057)
- net/gcoap: add/use Packet API Block implementation (#11056)
- netstats: add counter for retransmissions (#11836)
- sock: initial definitions for asynchronous event handling (#11723)
- pkg/tinydtls: add DTLS sock API implementation (#11943)
- pkg/wakaama: Add basic LWM2M client implementation (#11036)
- Feature update n rf5 sdk 15.0.0 (#9473)
- boards/common/remote: fix JLink flashing and debug (#9851)
- boards/esp32: adds Heltec WiFi LoRa 32 V2 board definition (#11265)
- boards/esp32: add TTGO T-Beam board definition (#11418)
- boards/stm32f4discovery: Change sda pin (#10445)
- frdm-kw41z: Use 1280 multiplier for FEI (#10311)
- cpu/esp32: add compile option when module ssp is used (#12034)
- cpu/esp32/esp wifi: add WPA2 enterprise mode with IEEE 802.x/EAP authentication (#12024)
- cpu/esp32: fix and improve periph/flash (#12035)
- cpu/esp32: fix of gpio_read for output ports (#11950)
- cpu/esp32: reimplementation of module esp_can as module periph can (#11989)
- cpu/saml21: add DFLL support (#10075)
- kinetis: Add support for Kinetis E series MCU MKE02Z64VQH2 and FRDM-KE02Z board (#9112)
- kinetis: Implement low power modes (#11789)
- kinetis: Perform auto-trim of IRC when possible (#10310)
- mips32r2_common: Update thread_arch for compatibility with newer toolchains (#10009)
- mips: Fix deps for MIPS newlib (#10021)
- stm32_common/i2c: fix wrong speed parameters for stm32l4 and stm32f7 (#9804)
- drivers: add driver for APDS99XX ambient light and proximity sensors (#10420)
- drivers: add driver for Honeywell HMC5883L magnetometer (#10083)
- drivers: add driver for InvenSense ITG-320X 3-axis gyroscope (#10092)
- drivers: add driver for L3GD20H 3-axis gyroscope (#10082)
- drivers: add driver for ST VL6180X ranging and ambient light sensor (#10462)
- drivers: htu21d relative humidity and temperature sensor driver (#10110)
- drivers/rail: efr32 radio driver (#9212)
- periph/dac: support for DAC extension API (#10512)
- periph/gpio: support for extension API (#9860)
- periph/gpio: support for extension API (part 2) (#9958)
- periph/pwm: support for PWM extension API (#10533)
- periph/timer: add timer_max and timer_diff API calls (#10493)
- sam0: Implement watchdog driver (#11520)
- jlink.sh: wait for rtt server to start (#10849)
- Makefile.include: configure '--output-sync=target' (#9792)
- Makefile.include: RIOTNOLINK ensure linking fails (#11168)
- makefiles: introduce 'LIBS' variable (#11111)
- openocd: Use reset halt when starting debug-server (#10479)
- newlib.mk: replace the error by a warning on nano header not found (#9384)
- pic32-wifire: add support for flashing with pic32prog (#9259)
- tapsetup: require to be executed with sudo (#11889)
- WIP RFC Replace usage of USEPKG by USEMODULE. (#9307)
- WIP: Support PR for comparing size with 'ld -r' PR (#9836)
- WIP: Support PR for comparing size with 'ld -r' PR #9836 (#9855)
- tools: build and use setsid command from external source when not available (#10204)
- [WIP] Fixes to compile using DOCKER and flash boards without local toolchain (#10870)
- Tracking: move CPU/CPU_MODEL to Makefile.features (#11477)
- Better Info on flash & RAM requirements (#9628)
- bench_timers: Split test implementations into separate files (#9927)
- tests/bench-arithmetic: Arithmetic operation benchmark (#9738)
- tests/isr_thread_yield_higher: test behavior from interrupt (#11759)
- tests/periph_timer_timeout0: Regression test for timer callbacks setting new timers (#10019)
- tests: provide tests for emcute (#11823)
- unittests: Const input strings (#10022)
- [WIP] tests/test_tools: add a test for the testing tools environment (#11094)
- [FIXME][testbranch] crypto: RFC3610 tests not all passing (#7968)
- riotnode: node abstraction package (#10949)