Home Assistant Custom Component Connector for Aqua Illumination Products
Code initially written by @mcclown https://github.com/mcclown/home-assistant-custom-components
Cleaning it up a bit for newer Home Assitant API and HACS integration
Support for a range of aquarium lights, from AquaIllumination.
Based on top of one of a python modules I wrote, AquaIPy. There is no documented API for AquaIllumination lights, so this has all had to be reverse engineered. Beta quality component, but still its use is at your own risk.
A brief rundown of features/caveats:
- This component implements 3 different types of platforms, for each light. A schedule enabled switch, a light for each channel and a sensor for each channel.
- Each individual light channel appears as a different light entity.
- Each individual light channel also has a corresponding sensor entity, with the brightness level. This is useful for graphing the light channel levels.
- It is possible to turn off the "scheduled mode" for the light but if it isn't turned off, then light brightness changes will appear for a few seconds then change back to the normal schedule.
- Support is only for the HD range of lights. No support for earlier models yet.
- No support for setting more than one channel at once.
- No support for increasing the channels to over 100% (the HD range). Although a schedule can still set values over 100%.
A sample configuration is shown below. This adds a light entity for each of the colour channels called _.
aqua_illumination:
- host: 192.168.1.100
name: sump ai
- host: 192.168.1.101
name: dt ai