Espressif Update wolfSSL component CMakeLists.txt

IDE/Espressif/ESP-IDF/compileAllExamples.sh

@@ -62,6 +62,9 @@ if  [[ "$RUN_SETUP" == "--run-setup" ]]; then
     echo "Testing a build of wolfSSL in ESP-IDF components directory"
     echo ""
     for file in "test_idf"; do
+        if [ -e "../../../include/user_settings.h" ]; then
+          mv "../../../include/user_settings.h" "../../../include/user_settings.h.${file}.bak"
+        fi
         pushd ${SCRIPT_DIR}/examples/wolfssl_${file}/ && idf.py fullclean build;
         THIS_ERR=$?
         popd

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/components/wolfssl/include/user_settings.h

@@ -0,0 +1,168 @@
+/* user_settings.h
+ *
+ * Copyright (C) 2006-2023 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+#undef WOLFSSL_ESPIDF
+#undef WOLFSSL_ESP32
+#undef WOLFSSL_ESPWROOM32SE
+#undef WOLFSSL_ESP32
+#undef WOLFSSL_ESP8266
+
+/* The Espressif sdkconfig will have chipset info.
+**
+** Possible values:
+**
+**   CONFIG_IDF_TARGET_ESP32
+**   CONFIG_IDF_TARGET_ESP32S3
+**   CONFIG_IDF_TARGET_ESP32C3
+**   CONFIG_IDF_TARGET_ESP32C6
+*/
+#include <sdkconfig.h>
+
+#define WOLFSSL_ESPIDF
+
+/*
+ * choose ONE of these Espressif chips to define:
+ *
+ * WOLFSSL_ESP32
+ * WOLFSSL_ESPWROOM32SE
+ * WOLFSSL_ESP8266
+ */
+
+#define WOLFSSL_ESP32
+
+/* #define DEBUG_WOLFSSL_VERBOSE */
+
+#define BENCH_EMBEDDED
+#define USE_CERT_BUFFERS_2048
+
+/* TLS 1.3                                 */
+#define WOLFSSL_TLS13
+#define HAVE_TLS_EXTENSIONS
+#define WC_RSA_PSS
+#define HAVE_HKDF
+#define HAVE_AEAD
+#define HAVE_SUPPORTED_CURVES
+
+/* when you want to use SINGLE THREAD */
+/* #define SINGLE_THREADED */
+#define NO_FILESYSTEM
+
+#define HAVE_AESGCM
+/* when you want to use SHA384 */
+/* #define WOLFSSL_SHA384 */
+#define WOLFSSL_SHA512
+#define HAVE_ECC
+#define HAVE_CURVE25519
+#define CURVE25519_SMALL
+#define HAVE_ED25519
+
+/* when you want to use pkcs7 */
+/* #define HAVE_PKCS7 */
+
+#if defined(HAVE_PKCS7)
+    #define HAVE_AES_KEYWRAP
+    #define HAVE_X963_KDF
+    #define WOLFSSL_AES_DIRECT
+#endif
+
+/* when you want to use aes counter mode */
+/* #define WOLFSSL_AES_DIRECT */
+/* #define WOLFSSL_AES_COUNTER */
+
+/* esp32-wroom-32se specific definition */
+#if defined(WOLFSSL_ESPWROOM32SE)
+    #define WOLFSSL_ATECC508A
+    #define HAVE_PK_CALLBACKS
+    /* when you want to use a custom slot allocation for ATECC608A */
+    /* unless your configuration is unusual, you can use default   */
+    /* implementation.                                             */
+    /* #define CUSTOM_SLOT_ALLOCATION                              */
+#endif
+
+/* RSA primitive specific definition */
+#if defined(WOLFSSL_ESP32) || defined(WOLFSSL_ESPWROOM32SE)
+    /* Define USE_FAST_MATH and SMALL_STACK                        */
+    #define ESP32_USE_RSA_PRIMITIVE
+    /* threshold for performance adjustment for HW primitive use   */
+    /* X bits of G^X mod P greater than                            */
+    #define EPS_RSA_EXPT_XBTIS           36
+    /* X and Y of X * Y mod P greater than                         */
+    #define ESP_RSA_MULM_BITS            2000
+#endif
+
+/* debug options */
+/* #define DEBUG_WOLFSSL */
+/* #define WOLFSSL_ESP32_CRYPT_DEBUG */
+/* #define WOLFSSL_ATECC508A_DEBUG          */
+
+/* date/time                               */
+/* if it cannot adjust time in the device, */
+/* enable macro below                      */
+/* #define NO_ASN_TIME */
+/* #define XTIME time */
+
+
+/* adjust wait-timeout count if you see timeout in RSA HW acceleration */
+#define ESP_RSA_TIMEOUT_CNT    0x249F00
+
+#if defined(CONFIG_IDF_TARGET_ESP32)
+    /* when you want not to use HW acceleration on ESP32 (below for S3, etc */
+    /* #define NO_ESP32_CRYPT                 */
+    /* #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
+    /* #define NO_WOLFSSL_ESP32_CRYPT_AES     */
+    /* #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI */
+#elif defined(CONFIG_IDF_TARGET_ESP32S2)
+    /* ESP32-S2 disabled by default; not implemented */
+    #define NO_ESP32_CRYPT
+    #define NO_WOLFSSL_ESP32_CRYPT_HASH
+    #define NO_WOLFSSL_ESP32_CRYPT_AES
+    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+#elif defined(CONFIG_IDF_TARGET_ESP32S3)
+    /* when you want not to use HW acceleration on ESP32-S3 */
+    /* #define NO_ESP32_CRYPT                 */
+    /* #define NO_WOLFSSL_ESP32_CRYPT_HASH    */
+    /* #define NO_WOLFSSL_ESP32_CRYPT_AES     */
+    /* #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI */
+#elif defined(CONFIG_IDF_TARGET_ESP32C3)
+    /* ESP32-C3 disabled by default, not implemented */
+    #define NO_ESP32_CRYPT
+    #define NO_WOLFSSL_ESP32_CRYPT_HASH
+    #define NO_WOLFSSL_ESP32_CRYPT_AES
+    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+#elif defined(CONFIG_IDF_TARGET_ESP32C6)
+    /* ESP32-C6 disabled by default, not implemented */
+    #define NO_ESP32_CRYPT
+    #define NO_WOLFSSL_ESP32_CRYPT_HASH
+    #define NO_WOLFSSL_ESP32_CRYPT_AES
+    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+#elif defined(CONFIG_IDF_TARGET_ESP32H2)
+    /* ESP32-H2 disabled by default, not implemented */
+    #define NO_ESP32_CRYPT
+    #define NO_WOLFSSL_ESP32_CRYPT_HASH
+    #define NO_WOLFSSL_ESP32_CRYPT_AES
+    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+#else
+    /* anything else unknown will have HW disabled by default */
+    #define NO_ESP32_CRYPT
+    #define NO_WOLFSSL_ESP32_CRYPT_HASH
+    #define NO_WOLFSSL_ESP32_CRYPT_AES
+    #define NO_WOLFSSL_ESP32_CRYPT_RSA_PRI
+#endif

IDE/Espressif/ESP-IDF/examples/wolfssl_benchmark/partitions_singleapp_large.csv

@@ -0,0 +1,34 @@
+# This tag is used to include this file in the ESP Component Registry:
+# __ESP_COMPONENT_SOURCE__
+
+# to view: idf.py partition-table
+#
+# ESP-IDF Partition Table
+# Name, Type,  SubType, Offset,  Size, Flags
+nvs,     data, nvs,     0x9000,  24K,
+phy_init,data, phy,     0xf000,  4K,
+factory, app,  factory, 0x10000, 1500K,
+
+
+# For other settings, see:
+# https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/partition-tables.html#creating-custom-tables
+#
+# Here is the summary printed for the �Single factory app, no OTA� configuration:
+#
+# # ESP-IDF Partition Table
+# # Name,   Type, SubType, Offset,  Size, Flags
+# nvs,      data, nvs,     0x9000,  0x6000,
+# phy_init, data, phy,     0xf000,  0x1000,
+# factory,  app,  factory, 0x10000, 1M,
+#
+#
+# Here is the summary printed for the �Factory app, two OTA definitions� configuration:
+#
+# # ESP-IDF Partition Table
+# # Name,   Type, SubType, Offset,  Size, Flags
+# nvs,      data, nvs,     0x9000,  0x4000,
+# otadata,  data, ota,     0xd000,  0x2000,
+# phy_init, data, phy,     0xf000,  0x1000,
+# factory,  app,  factory, 0x10000,  1M,
+# ota_0,    app,  ota_0,   0x110000, 1M,
+# ota_1,    app,  ota_1,   0x210000, 1M,