Date: 26.06.2019 Version: 1.8.3 - 20190626

oled_phoniebox

oled_phoniebox Based on https://github.com/rm-hull/luma.oled

Tested with this display (affiliate Link): https://amzn.to/2SjPFPt

Start Screen	Play View Full	Play View Lite	Info Screen	Pause Screen	Play Screen	Vol Down Screen	Vol Up Screen

My finished Box on Youtube: Die drei ??? Kids Phoniebox Youtube Information Video: German Youtube Video Forum: German Forum

My Phoniebox Project (german only): My Selfmade Phoniebox

Installation Steps

Installation I2C

Please follow these Instructions: https://learn.adafruit.com/adafruits-raspberry-pi-lesson-4-gpio-setup/configuring-i2c

Deactivate Buttons

It is possible, that the Display uses the same GPIO like the Shut-Command of the jukebox4kids. In this case, you should edit the file gpio-buttons.py like this

sed -i -e "s:shut = Button(3, hold_time=2):#shut = Button(3, hold_time=2):g" ~/RPi-Jukebox-RFID/scripts/gpio-buttons.py

Service Installation

Please notice: This installer will install in the home-Directory of the user pi in the subfolder oled_phoniebox. If you try to rename or move this folder, the service stops working. Run the following code with the user pi:

cd; rm o4p_installer.sh; wget https://raw.githubusercontent.com/splitti/oled_phoniebox/master/scripts/install/o4p_installer.sh; chmod +x o4p_installer.sh; ./o4p_installer.sh

Contrast Control

You can add Contrast Control while editing the ~/RPi-Jukebox-RFID/scripts/gpio-buttons.py. You can find an example here: https://github.com/splitti/oled_phoniebox/tree/master/scripts/gpio-buttons Add a Button press and start these commands:

python3 ../oled_phoniebox/scripts/contrast/contrast_up.py python3 ../oled_phoniebox/scripts/contrast/contrast_down.py

Just another Feature

Press Prev- and Next-Button together for two or more seconds, and you get some Information about your WiFi and the installed oled_phoniebox-Version. If you press the buttons again, you can change the Display-Mode.

Spend me a coffee

paypal.me

FAQ

How can i switch between lite or full version?

• Press and hold Next and Prev together for 2 seconds or more. The Information Screens will be displayed. Press and hold Next and Prev again for 2 seconds and the mode will be changed.

How should i update the oled_phoniebox?

• This time, the only way is to run the installer again, because there are different changes in the file-system. git pull does not work here!

Thank you

Contributors and Testers:

• uelly
• carver

Github:

• Luma.Oled
• Luma.Examples
• RPi-Jukebox-RFID also known as Phoniebox

Image (music.png):

• https://pixabay.com/de/noten-musik-melodie-musiknote-2570451

Images (cardhand and musiccard) based on:

• https://pixabay.com/de/turm-mikrowelle-wireless-signal-34981/
• https://pixabay.com/de/klavier-noten-musik-klavier-musical-2460937/
• https://pixabay.com/de/hand-karte-halten-angabe-ticket-307636/
• https://pixabay.com/de/herunterfahren-macht-off-auf-icon-2935465/

Font:

• https://www.dafont.com/bitstream-vera-mono.font
• https://www.dafont.com/wifi.font

Changelog

• 26.06.2019 - Version 1.8.3 - 20190626
  • Features:
    • New Mixed Mode
    • Special Button Hint optimized
    • Shorter Duration Time of Status like Play, Vol Up/Down
• 31.01.2019 - Version 1.7.1 - 20190131
  • Bugfix:
    • The information on the radio stream was not displayed correctly: fixed (Issue: splitti#2 (comment))
    • Fixing some small errors
  • Features:
    • Mute Image
    • Radio Image (new Font added)
• 18.01.2019 - Version 1.6.2 - 20190118
  • Bugfix: One Line Install-Script
• 16.01.2019 - Version 1.6.1 - 20190116
  • Change mode without shell or installation
• 13.01.2019 - Version 1.5.3 - 20190113
  • Bugfix:
    • Wifi
    • Button Replacement
  • Features:
    • New updated Scrolling (Letter Scrolling)
    • Wifi gets a new view
• 11.01.2019 - Version 1.3.6
  • Bugfixing
  • Code optimized
  • Lite and Full Display Version (like parent and kids-mode)
  • Contrast-Control Installation
  • I2C Installation
  • New Button Control Installation
  • Special Button Hint: Press Prev + Next for more then two seconds and you get some informations...
• 10.01.2019
  • New One Line Setup
  • Removed Luma Examples; Function integrated
• 09.01.2019
  • Bugfixing WLAN
  • Contrast Control Tutorial with GPIO-Button-Control
• 05.01.2019
  • Contrast Control added
• 04.01.2019
  • WiFi-Signal
  • Monospaced Font
  • New Track View
  • Play bar 0 - 100%
• 01.01.2019
  • Shutdown Image
• 30.12.2018
  • Added Text scrolling
  • Added Tracknr.
  • New Screens optimized
• 29.12.2018
  • Python 3 Support
  • New Screens
  • Setup Bugfixes