Danfoss Ally eTRV automations and scripts for Home Assistant using Zigbee2MQTT. Tested to work with firmware v1.28(00.28.0008 00.28).
The blueprints can be updated by importing them again and overwriting the existing one.
Major version number (=v1.x.x) will be updated if any breaking changes are implemented. In this case your existing script might not have input values in correct format. It is recommended to remove any existing input values in YAML editing view if updating to a new major version.
Danfoss Ally has no knowledge of the current time. Zigbee coordinator must send the current time to it. Recommended time update is on weekly interval.
- The script will automatically set DST helpers to last sunday of the current year and the helper's month. Please raise an issue if this is a problem for you.
- The weekly schedule is lost after power cycle or OTA or error state.
Automatically adjust eTRV's own temperature with offset. The external temperature needs to be send at least every 3 hours but no more often than every 30 minutes @ every 0,1K change.
Rely only for the external temperature. The external temperature needs to be send at least every 30 minutes but no more often than every 5 minutes @ every 0,1K change.
