You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected for IPv4-mapped IPv6 addresses, returning false for addresses which would return true in their traditional IPv4 forms.
Affected range
<1.19.9
Fixed version
1.19.9
Description
Not all valid JavaScript whitespace characters are considered to be whitespace. Templates containing whitespace characters outside of the character set "\t\n\f\r\u0020\u2028\u2029" in JavaScript contexts that also contain actions may not be properly sanitized during execution.
Affected range
<1.19.8
Fixed version
1.19.8
Description
Templates do not properly consider backticks (`) as Javascript string delimiters, and do not escape them as expected.
Backticks are used, since ES6, for JS template literals. If a template contains a Go template action within a Javascript template literal, the contents of the action can be used to terminate the literal, injecting arbitrary Javascript code into the Go template.
As ES6 template literals are rather complex, and themselves can do string interpolation, the decision was made to simply disallow Go template actions from being used inside of them (e.g. "var a = {{.}}"), since there is no obviously safe way to allow this behavior. This takes the same approach as github.com/google/safehtml.
With fix, Template.Parse returns an Error when it encounters templates like this, with an ErrorCode of value 12. This ErrorCode is currently unexported, but will be exported in the release of Go 1.21.
Users who rely on the previous behavior can re-enable it using the GODEBUG flag jstmpllitinterp=1, with the caveat that backticks will now be escaped. This should be used with caution.
Affected range
<1.19.10
Fixed version
1.19.10
Description
On Unix platforms, the Go runtime does not behave differently when a binary is run with the setuid/setgid bits. This can be dangerous in certain cases, such as when dumping memory state, or assuming the status of standard i/o file descriptors.
If a setuid/setgid binary is executed with standard I/O file descriptors closed, opening any files can result in unexpected content being read or written with elevated privileges. Similarly, if a setuid/setgid program is terminated, either via panic or signal, it may leak the contents of its registers.
Affected range
<1.21.12
Fixed version
1.21.12
Description
The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail.
An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail.
Affected range
<1.20.0
Fixed version
1.20.0
Description
Before Go 1.20, the RSA based TLS key exchanges used the math/big library, which is not constant time. RSA blinding was applied to prevent timing attacks, but analysis shows this may not have been fully effective. In particular it appears as if the removal of PKCS#1 padding may leak timing information, which in turn could be used to recover session key bits.
In Go 1.20, the crypto/tls library switched to a fully constant time RSA implementation, which we do not believe exhibits any timing side channels.
Affected range
<1.20.11
Fixed version
1.20.11
Description
The filepath package does not recognize paths with a ??\ prefix as special.
On Windows, a path beginning with ??\ is a Root Local Device path equivalent to a path beginning with \?. Paths with a ??\ prefix may be used to access arbitrary locations on the system. For example, the path ??\c:\x is equivalent to the more common path c:\x.
Before fix, Clean could convert a rooted path such as \a..??\b into the root local device path ??\b. Clean will now convert this to .??\b.
Similarly, Join(, ??, b) could convert a seemingly innocent sequence of path elements into the root local device path ??\b. Join will now convert this to .??\b.
In addition, with fix, IsAbs now correctly reports paths beginning with ??\ as absolute, and VolumeName correctly reports the ??\ prefix as a volume name.
UPDATE: Go 1.20.11 and Go 1.21.4 inadvertently changed the definition of the volume name in Windows paths starting with ?, resulting in filepath.Clean(?\c:) returning ?\c: rather than ?\c:\ (among other effects). The previous behavior has been restored.
Affected range
<1.20.10
Fixed version
1.20.10
Description
A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing.
With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function.
Affected range
<1.20.10
Fixed version
1.20.10
Description
A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing.
With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function.
Affected range
<1.19.8
Fixed version
1.19.8
Description
Calling any of the Parse functions on Go source code which contains //line directives with very large line numbers can cause an infinite loop due to integer overflow.
Affected range
<1.19.8
Fixed version
1.19.8
Description
Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts.
This stems from several causes:
mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended.
Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts.
ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector.
The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue.
With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations.
In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms:
Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=.
Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.
Affected range
<1.19.8
Fixed version
1.19.8
Description
HTTP and MIME header parsing can allocate large amounts of memory, even when parsing small inputs, potentially leading to a denial of service.
Certain unusual patterns of input data can cause the common function used to parse HTTP and MIME headers to allocate substantially more memory than required to hold the parsed headers. An attacker can exploit this behavior to cause an HTTP server to allocate large amounts of memory from a small request, potentially leading to memory exhaustion and a denial of service.
With fix, header parsing now correctly allocates only the memory required to hold parsed headers.
Affected range
<1.19.6
Fixed version
1.19.6
Description
A denial of service is possible from excessive resource consumption in net/http and mime/multipart.
Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue.
ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files.
With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous.
In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct.
Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.
Affected range
<1.19.6
Fixed version
1.19.6
Description
Large handshake records may cause panics in crypto/tls.
Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses.
This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert).
Affected range
<1.19.6
Fixed version
1.19.6
Description
A maliciously crafted HTTP/2 stream could cause excessive CPU consumption in the HPACK decoder, sufficient to cause a denial of service from a small number of small requests.
Affected range
<1.19.6
Fixed version
1.19.6
Description
A path traversal vulnerability exists in filepath.Clean on Windows.
On Windows, the filepath.Clean function could transform an invalid path such as "a/../c:/b" into the valid path "c:\b". This transformation of a relative (if invalid) path into an absolute path could enable a directory traversal attack.
After fix, the filepath.Clean function transforms this path into the relative (but still invalid) path ".\c:\b".
Affected range
<1.19.9
Fixed version
1.19.9
Description
Templates containing actions in unquoted HTML attributes (e.g. "attr={{.}}") executed with empty input can result in output with unexpected results when parsed due to HTML normalization rules. This may allow injection of arbitrary attributes into tags.
Affected range
<1.19.9
Fixed version
1.19.9
Description
Angle brackets (<>) are not considered dangerous characters when inserted into CSS contexts. Templates containing multiple actions separated by a '/' character can result in unexpectedly closing the CSS context and allowing for injection of unexpected HTML, if executed with untrusted input.
Affected range
<1.19.11
Fixed version
1.19.11
Description
The HTTP/1 client does not fully validate the contents of the Host header. A maliciously crafted Host header can inject additional headers or entire requests.
With fix, the HTTP/1 client now refuses to send requests containing an invalid Request.Host or Request.URL.Host value.
Affected range
<1.20.8
Fixed version
1.20.8
Description
The html/template package does not apply the proper rules for handling occurrences of "<script", "<!--", and "</script" within JS literals in <script> contexts. This may cause the template parser to improperly consider script contexts to be terminated early, causing actions to be improperly escaped. This could be leveraged to perform an XSS attack.
Affected range
<1.20.8
Fixed version
1.20.8
Description
The html/template package does not properly handle HTML-like "" comment tokens, nor hashbang "#!" comment tokens, in <script> contexts. This may cause the template parser to improperly interpret the contents of <script> contexts, causing actions to be improperly escaped. This may be leveraged to perform an XSS attack.
Affected range
<1.21.11
Fixed version
1.21.11
Description
The archive/zip package's handling of certain types of invalid zip files differs from the behavior of most zip implementations. This misalignment could be exploited to create an zip file with contents that vary depending on the implementation reading the file. The archive/zip package now rejects files containing these errors.
Affected range
<1.20.11
Fixed version
1.20.11
Description
On Windows, The IsLocal function does not correctly detect reserved device names in some cases.
Reserved names followed by spaces, such as "COM1 ", and reserved names "COM" and "LPT" followed by superscript 1, 2, or 3, are incorrectly reported as local.
With fix, IsLocal now correctly reports these names as non-local.
Affected range
<1.20.12
Fixed version
1.20.12
Description
A malicious HTTP sender can use chunk extensions to cause a receiver reading from a request or response body to read many more bytes from the network than are in the body.
A malicious HTTP client can further exploit this to cause a server to automatically read a large amount of data (up to about 1GiB) when a handler fails to read the entire body of a request.
Chunk extensions are a little-used HTTP feature which permit including additional metadata in a request or response body sent using the chunked encoding. The net/http chunked encoding reader discards this metadata. A sender can exploit this by inserting a large metadata segment with each byte transferred. The chunk reader now produces an error if the ratio of real body to encoded bytes grows too small.
Affected range
<1.19.12
Fixed version
1.19.12
Description
Extremely large RSA keys in certificate chains can cause a client/server to expend significant CPU time verifying signatures.
With fix, the size of RSA keys transmitted during handshakes is restricted to <= 8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only three certificates in circulation with keys larger than this, and all three appear to be test certificates that are not actively deployed. It is possible there are larger keys in use in private PKIs, but we target the web PKI, so causing breakage here in the interests of increasing the default safety of users of crypto/tls seems reasonable.
Affected range
<1.19.7
Fixed version
1.19.7
Description
The ScalarMult and ScalarBaseMult methods of the P256 Curve may return an incorrect result if called with some specific unreduced scalars (a scalar larger than the order of the curve).
This does not impact usages of crypto/ecdsa or crypto/ecdh.
Affected range
<1.21.8
Fixed version
1.21.8
Description
If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates.
Affected range
<1.21.8
Fixed version
1.21.8
Description
The ParseAddressList function incorrectly handles comments (text within parentheses) within display names. Since this is a misalignment with conforming address parsers, it can result in different trust decisions being made by programs using different parsers.
Affected range
<1.21.8
Fixed version
1.21.8
Description
Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic.
This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates.
Affected range
<1.21.8
Fixed version
1.21.8
Description
When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion.
With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines.
Affected range
<1.21.8
Fixed version
1.21.8
Description
When following an HTTP redirect to a domain which is not a subdomain match or exact match of the initial domain, an http.Client does not forward sensitive headers such as "Authorization" or "Cookie". For example, a redirect from foo.com to www.foo.com will forward the Authorization header, but a redirect to bar.com will not.
A maliciously crafted HTTP redirect could cause sensitive headers to be unexpectedly forwarded.
Affected range
<1.21.9
Fixed version
1.21.9
Description
An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames.
Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed.
This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send.
The fix sets a limit on the amount of excess header frames we will process before closing a connection.
github.com/containerd/containerd1.5.9 (golang)
pkg:golang/github.com/containerd/containerd@1.5.9
Exposure of Sensitive Information to an Unauthorized Actor
Affected range
>=1.5.0 <1.5.10
Fixed version
1.5.10
CVSS Score
7.5
CVSS Vector
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N
Description
Impact
A bug was found in containerd where containers launched through containerd’s CRI implementation with a specially-crafted image configuration could gain access to read-only copies of arbitrary files and directories on the host. This may bypass any policy-based enforcement on container setup (including a Kubernetes Pod Security Policy) and expose potentially sensitive information. Kubernetes and crictl can both be configured to use containerd’s CRI implementation.
Patches
This bug has been fixed in containerd 1.6.1, 1.5.10 and 1.4.13. Users should update to these versions to resolve the issue.
Workarounds
Ensure that only trusted images are used.
Credits
The containerd project would like to thank Felix Wilhelm of Google Project Zero for responsibly disclosing this issue in accordance with the containerd security policy.
For more information
If you have any questions or comments about this advisory:
Supplementary groups are not set up properly inside a container. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases and potentially escalate privileges in the container. Uses of the containerd client library may also have improperly setup supplementary groups.
Affected range
<1.5.18
Fixed version
1.5.18
Description
Supplementary groups are not set up properly inside a container. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases and potentially escalate privileges in the container. Uses of the containerd client library may also have improperly setup supplementary groups.
Affected range
<1.5.18
Fixed version
1.5.18
Description
Supplementary groups are not set up properly inside a container. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases and potentially escalate privileges in the container. Uses of the containerd client library may also have improperly setup supplementary groups.
Affected range
<1.5.18
Fixed version
1.5.18
Description
Supplementary groups are not set up properly inside a container. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases and potentially escalate privileges in the container. Uses of the containerd client library may also have improperly setup supplementary groups.
Uncontrolled Resource Consumption
Affected range
<1.5.16
Fixed version
1.5.16
CVSS Score
5.7
CVSS Vector
CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H
Description
Impact
A bug was found in containerd's CRI implementation where a user can exhaust memory on the host. In the CRI stream server, a goroutine is launched to handle terminal resize events if a TTY is requested. If the user's process fails to launch due to, for example, a faulty command, the goroutine will be stuck waiting to send without a receiver, resulting in a memory leak. Kubernetes and crictl can both be configured to use containerd's CRI implementation and the stream server is used for handling container IO.
Patches
This bug has been fixed in containerd 1.6.12 and 1.5.16. Users should update to these versions to resolve the issue.
Workarounds
Ensure that only trusted images and commands are used and that only trusted users have permissions to execute commands in running containers.
For more information
If you have any questions or comments about this advisory:
When importing an OCI image, there was no limit on the number of bytes read for certain files. A maliciously crafted image with a large file where a limit was not applied could cause a denial of service.
Patches
This bug has been fixed in containerd 1.6.18 and 1.5.18. Users should update to these versions to resolve the issue.
Workarounds
Ensure that only trusted images are used and that only trusted users have permissions to import images.
Credits
The containerd project would like to thank David Korczynski and Adam Korczynski of ADA Logics for responsibly disclosing this issue in accordance with the containerd security policy during a security fuzzing audit sponsored by CNCF.
For more information
If you have any questions or comments about this advisory:
A bug was found in containerd's CRI implementation where programs inside a container can cause the containerd daemon to consume memory without bound during invocation of the ExecSync API. This can cause containerd to consume all available memory on the computer, denying service to other legitimate workloads. Kubernetes and crictl can both be configured to use containerd's CRI implementation; ExecSync may be used when running probes or when executing processes via an "exec" facility.
Patches
This bug has been fixed in containerd 1.6.6 and 1.5.13. Users should update to these versions to resolve the issue.
Workarounds
Ensure that only trusted images and commands are used.
The containerd project would like to thank David Korczynski and Adam Korczynski of ADA Logics for responsibly disclosing this issue in accordance with the containerd security policy during a security audit sponsored by CNCF and facilitated by OSTIF.
For more information
If you have any questions or comments about this advisory:
A bug was found in containerd where supplementary groups are not set up properly inside a container. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases, potentially gaining access to sensitive information or gaining the ability to execute code in that container.
Downstream applications that use the containerd client library may be affected as well.
Patches
This bug has been fixed in containerd v1.6.18 and v.1.5.18. Users should update to these versions and recreate containers to resolve this issue. Users who rely on a downstream application that uses containerd's client library should check that application for a separate advisory and instructions.
Workarounds
Ensure that the "USER $USERNAME" Dockerfile instruction is not used. Instead, set the container entrypoint to a value similar to ENTRYPOINT ["su", "-", "user"] to allow su to properly set up supplementary groups.
/sys/devices/virtual/powercap accessible by default to containers
Intel's RAPL (Running Average Power Limit) feature, introduced by the Sandy Bridge microarchitecture, provides software insights into hardware energy consumption. To facilitate this, Intel introduced the powercap framework in Linux kernel 3.13, which reads values via relevant MSRs (model specific registers) and provides unprivileged userspace access via sysfs. As RAPL is an interface to access a hardware feature, it is only available when running on bare metal with the module compiled into the kernel.
By 2019, it was realized that in some cases unprivileged access to RAPL readings could be exploited as a power-based side-channel against security features including AES-NI (potentially inside a SGX enclave) and KASLR (kernel address space layout randomization). Also known as the PLATYPUS attack, Intel assigned CVE-2020-8694 and CVE-2020-8695, and AMD assigned CVE-2020-12912.
Several mitigations were applied; Intel reduced the sampling resolution via a microcode update, and the Linux kernel prevents access by non-root users since 5.10. However, this kernel-based mitigation does not apply to many container-based scenarios:
Unless using user namespaces, root inside a container has the same level of privilege as root outside the container, but with a slightly more narrow view of the system
sysfs is mounted inside containers read-only; however only read access is needed to carry out this attack on an unpatched CPU
While this is not a direct vulnerability in container runtimes, defense in depth and safe defaults are valuable and preferred, especially as this poses a risk to multi-tenant container environments. This is provided by masking /sys/devices/virtual/powercap in the default mount configuration, and adding an additional set of rules to deny it in the default AppArmor profile.
While sysfs is not the only way to read from the RAPL subsystem, other ways of accessing it require additional capabilities such as CAP_SYS_RAWIO which is not available to containers by default, or perf paranoia level less than 1, which is a non-default kernel tunable.
A bug was found in containerd where containers were incorrectly started with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during execve(2). Normally, when executable programs have specified permitted file capabilities, otherwise unprivileged users and processes can execute those programs and gain the specified file capabilities up to the bounding set. Due to this bug, containers which included executable programs with inheritable file capabilities allowed otherwise unprivileged users and processes to additionally gain these inheritable file capabilities up to the container's bounding set. Containers which use Linux users and groups to perform privilege separation inside the container are most directly impacted.
This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set.
Patches
This bug has been fixed in containerd 1.5.11 and 1.6.2. Users should update to these versions as soon as possible. Running containers should be stopped, deleted, and recreated for the inheritable capabilities to be reset.
This fix changes containerd behavior such that containers are started with a more typical Linux environment. Refer to capabilities(7) for a description of how capabilities work. Note that permitted file capabilities continue to allow for privileges to be raised up to the container's bounding set and that processes may add capabilities to their own inheritable set up to the container's bounding set per the rules described in the manual page. In all cases the container's bounding set provides an upper bound on the capabilities that can be assumed and provides for the container security sandbox.
Workarounds
The entrypoint of a container can be modified to use a utility like capsh(1) to drop inheritable capabilities prior to the primary process starting.
For more information
If you have any questions or comments about this advisory:
OWASP Top Ten 2017 Category A9 - Using Components with Known Vulnerabilities
Affected range
<=1.6.25
Fixed version
1.6.26, 1.7.11
Description
/sys/devices/virtual/powercap accessible by default to containers
Intel's RAPL (Running Average Power Limit) feature, introduced by the Sandy Bridge microarchitecture, provides software insights into hardware energy consumption. To facilitate this, Intel introduced the powercap framework in Linux kernel 3.13, which reads values via relevant MSRs (model specific registers) and provides unprivileged userspace access via sysfs. As RAPL is an interface to access a hardware feature, it is only available when running on bare metal with the module compiled into the kernel.
By 2019, it was realized that in some cases unprivileged access to RAPL readings could be exploited as a power-based side-channel against security features including AES-NI (potentially inside a SGX enclave) and KASLR (kernel address space layout randomization). Also known as the PLATYPUS attack, Intel assigned CVE-2020-8694 and CVE-2020-8695, and AMD assigned CVE-2020-12912.
Several mitigations were applied; Intel reduced the sampling resolution via a microcode update, and the Linux kernel prevents access by non-root users since 5.10. However, this kernel-based mitigation does not apply to many container-based scenarios:
Unless using user namespaces, root inside a container has the same level of privilege as root outside the container, but with a slightly more narrow view of the system
sysfs is mounted inside containers read-only; however only read access is needed to carry out this attack on an unpatched CPU
While this is not a direct vulnerability in container runtimes, defense in depth and safe defaults are valuable and preferred, especially as this poses a risk to multi-tenant container environments. This is provided by masking /sys/devices/virtual/powercap in the default mount configuration, and adding an additional set of rules to deny it in the default AppArmor profile.
While sysfs is not the only way to read from the RAPL subsystem, other ways of accessing it require additional capabilities such as CAP_SYS_RAWIO which is not available to containers by default, or perf paranoia level less than 1, which is a non-default kernel tunable.
The Prometheus client_golang HTTP server is vulnerable to a denial of service attack when handling requests with non-standard HTTP methods.
In order to be affected, an instrumented software must use any of the promhttp.InstrumentHandler* middleware except RequestsInFlight; not filter any specific methods (e.g GET) before middleware; pass a metric with a "method" label name to a middleware; and not have any firewall/LB/proxy that filters away requests with unknown "method".
Affected range
<1.11.1
Fixed version
1.11.1
Description
The Prometheus client_golang HTTP server is vulnerable to a denial of service attack when handling requests with non-standard HTTP methods.
In order to be affected, an instrumented software must use any of the promhttp.InstrumentHandler* middleware except RequestsInFlight; not filter any specific methods (e.g GET) before middleware; pass a metric with a "method" label name to a middleware; and not have any firewall/LB/proxy that filters away requests with unknown "method".
Uncontrolled Resource Consumption
Affected range
<1.11.1
Fixed version
1.11.1
CVSS Score
7.5
CVSS Vector
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Description
This is the Go client library for Prometheus. It has two separate parts, one for instrumenting application code, and one for creating clients that talk to the Prometheus HTTP API. client_golang is the instrumentation library for Go applications in Prometheus, and the promhttp package in client_golang provides tooling around HTTP servers and clients.
Impact
HTTP server susceptible to a Denial of Service through unbounded cardinality, and potential memory exhaustion, when handling requests with non-standard HTTP methods.
Affected Configuration
In order to be affected, an instrumented software must
Use any of promhttp.InstrumentHandler* middleware except RequestsInFlight.
Do not filter any specific methods (e.g GET) before middleware.
Pass metric with method label name to our middleware.
Not have any firewall/LB/proxy that filters away requests with unknown method.
Missing Release of Resource after Effective Lifetime
Affected range
<0.3.8
Fixed version
0.3.8
CVSS Score
7.5
CVSS Vector
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Description
The BCP 47 tag parser has quadratic time complexity due to inherent aspects of its design. Since the parser is, by design, exposed to untrusted user input, this can be leveraged to force a program to consume significant time parsing Accept-Language headers. The parser cannot be easily rewritten to fix this behavior for various reasons. Instead the solution implemented in this CL is to limit the total complexity of tags passed into ParseAcceptLanguage by limiting the number of dashes in the string to 1000. This should be more than enough for the majority of real world use cases, where the number of tags being sent is likely to be in the single digits.
Specific Go Packages Affected
golang.org/x/text/language
Out-of-bounds Read
Affected range
<0.3.7
Fixed version
0.3.7
CVSS Score
7.5
CVSS Vector
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Description
golang.org/x/text/language in golang.org/x/text before 0.3.7 can panic with an out-of-bounds read during BCP 47 language tag parsing. Index calculation is mishandled. If parsing untrusted user input, this can be used as a vector for a denial-of-service attack.
In net/http in Go before 1.18.6 and 1.19.x before 1.19.1, attackers can cause a denial of service because an HTTP/2 connection can hang during closing if shutdown were preempted by a fatal error.
Affected range
<0.0.0-20211209124913-491a49abca63
Fixed version
0.0.0-20211209124913-491a49abca63
Description
An attacker can cause unbounded memory growth in servers accepting HTTP/2 requests.
Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (dockerd), which is developed as moby/moby is commonly referred to as Docker.
Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code.
The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes.
Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption.
When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN.
Two iptables rules serve to filter incoming VXLAN datagrams with a VNI that corresponds to an encrypted network and discards unencrypted datagrams. The rules are appended to the end of the INPUT filter chain, following any rules that have been previously set by the system administrator. Administrator-set rules take precedence over the rules Moby sets to discard unencrypted VXLAN datagrams, which can potentially admit unencrypted datagrams that should have been discarded.
On Red Hat Enterprise Linux and derivatives such as CentOS and Rocky, the xt_u32 module has been:
These rules are not created when xt_u32 is unavailable, even though the container is still attached to the network.
Impact
Encrypted overlay networks on affected configurations silently accept cleartext VXLAN datagrams that are tagged with the VNI of an encrypted overlay network. As a result, it is possible to inject arbitrary Ethernet frames into the encrypted overlay network by encapsulating them in VXLAN datagrams.
The injection of arbitrary Ethernet frames can enable a Denial of Service attack. A sophisticated attacker may be able to establish a UDP or TCP connection by way of the container’s outbound gateway that would otherwise be blocked by a stateful firewall, or carry out other escalations beyond simple injection by smuggling packets into the overlay network.
Patches
Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16.
Workarounds
Close the VXLAN port (by default, UDP port 4789) to incoming traffic at the Internet boundary (see GHSA-vwm3-crmr-xfxw) to prevent all VXLAN packet injection.
Ensure that the xt_u32 kernel module is available on all nodes of the Swarm cluster.
Background
#43382 partially discussed this concern, but did not consider the security implications.
Mirantis FIELD-5788 essentially duplicates #43382, and was created six months earlier; it similarly overlooked the security implications.
#45118 is the ancestor of the final patches, and was where the security implications were discovered.
The classic builder cache system is prone to cache poisoning if the image is built FROM scratch.
Also, changes to some instructions (most important being HEALTHCHECK and ONBUILD) would not cause a cache miss.
An attacker with the knowledge of the Dockerfile someone is using could poison their cache by making them pull a specially crafted image that would be considered as a valid cache candidate for some build steps.
For example, an attacker could create an image that is considered as a valid cache candidate for:
FROM scratch
MAINTAINER Pawel
when in fact the malicious image used as a cache would be an image built from a different Dockerfile.
In the second case, the attacker could for example substitute a different HEALTCHECK command.
Impact
23.0+ users are only affected if they explicitly opted out of Buildkit (DOCKER_BUILDKIT=0 environment variable) or are using the /build API endpoint (which uses the classic builder by default).
All users on versions older than 23.0 could be impacted. An example could be a CI with a shared cache, or just a regular Docker user pulling a malicious image due to misspelling/typosquatting.
Image build API endpoint (/build) and ImageBuild function from github.com/docker/docker/client is also affected as it the uses classic builder by default.
Patches
Patches are included in Moby releases:
v25.0.2
v24.0.9
v23.0.10
Workarounds
Use --no-cache or use Buildkit if possible (DOCKER_BUILDKIT=1, it's default on 23.0+ assuming that the buildx plugin is installed).
Use Version = types.BuilderBuildKit or NoCache = true in ImageBuildOptions for ImageBuild call.
Unprotected Alternate Channel
Affected range
>=1.12.0 <20.10.24
Fixed version
20.10.24
CVSS Score
6.8
CVSS Vector
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:H/A:N
Description
Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (dockerd), which is developed as moby/moby is commonly referred to as Docker.
Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code.
The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes.
Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption.
When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN.
The overlay driver dynamically and lazily defines the kernel configuration for the VXLAN network on each node as containers are attached and detached. Routes and encryption parameters are only defined for destination nodes that participate in the network. The iptables rules that prevent encrypted overlay networks from accepting unencrypted packets are not created until a peer is available with which to communicate.
Impact
Encrypted overlay networks silently accept cleartext VXLAN datagrams that are tagged with the VNI of an encrypted overlay network. As a result, it is possible to inject arbitrary Ethernet frames into the encrypted overlay network by encapsulating them in VXLAN datagrams. The implications of this can be quite dire, and GHSA-vwm3-crmr-xfxw should be referenced for a deeper exploration.
Patches
Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16.
Workarounds
In multi-node clusters, deploy a global ‘pause’ container for each encrypted overlay network, on every node. For example, use the registry.k8s.io/pause image and a --mode global service.
For a single-node cluster, do not use overlay networks of any sort. Bridge networks provide the same connectivity on a single node and have no multi-node features.
The Swarm ingress feature is implemented using an overlay network, but can be disabled by publishing ports in host mode instead of ingress mode (allowing the use of an external load balancer), and removing the ingress network.
If encrypted overlay networks are in exclusive use, block UDP port 4789 from traffic that has not been validated by IPSec. For example, iptables -A INPUT -m udp —-dport 4789 -m policy --dir in --pol none -j DROP.
Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (dockerd), which is developed as moby/moby is commonly referred to as Docker.
Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code.
The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes.
Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption.
When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN.
An iptables rule designates outgoing VXLAN datagrams with a VNI that corresponds to an encrypted overlay network for IPsec encapsulation.
On Red Hat Enterprise Linux and derivatives such as CentOS and Rocky, the xt_u32 module has been:
This rule is not created when xt_u32 is unavailable, even though the container is still attached to the network.
Impact
Encrypted overlay networks on affected platforms silently transmit unencrypted data. As a result, overlay networks may appear to be functional, passing traffic as expected, but without any of the expected confidentiality or data integrity guarantees.
It is possible for an attacker sitting in a trusted position on the network to read all of the application traffic that is moving across the overlay network, resulting in unexpected secrets or user data disclosure. Thus, because many database protocols, internal APIs, etc. are not protected by a second layer of encryption, a user may rely on Swarm encrypted overlay networks to provide confidentiality, which due to this vulnerability is no longer guaranteed.
Patches
Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16.
Workarounds
Close the VXLAN port (by default, UDP port 4789) to outgoing traffic at the Internet boundary (see GHSA-vwm3-crmr-xfxw) in order to prevent unintentionally leaking unencrypted traffic over the Internet.
Ensure that the xt_u32 kernel module is available on all nodes of the Swarm cluster.
Background
#43382 partially discussed this concern, but did not consider the security implications.
Mirantis FIELD-5788 essentially duplicates #43382, and was created six months earlier; it similarly overlooked the security implications.
#45118 is the ancestor of the final patches, and was where the security implications were discovered.
Moby is an open-source project created by Docker to enable software containerization. A bug was found in Moby (Docker Engine) where supplementary groups are not set up properly. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases, potentially gaining access to sensitive information or gaining the ability to execute code in that container. This bug is fixed in Moby (Docker Engine) 20.10.18. Users should update to this version when it is available. Running containers should be stopped and restarted for the permissions to be fixed. For users unable to upgrade, this problem can be worked around by not using the "USER $USERNAME" Dockerfile instruction. Instead by calling ENTRYPOINT ["su", "-", "user"] the supplementary groups will be set up properly.
Thanks to Steven Murdoch for reporting this issue.
Impact
If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases, potentially gaining access to sensitive information or gaining the ability to execute code in that container.
Patches
This bug is fixed in Moby (Docker Engine) 20.10.18. Users should update to this version when it is available.
Workarounds
This problem can be worked around by not using the "USER $USERNAME" Dockerfile instruction. Instead by calling ENTRYPOINT ["su", "-", "user"] the supplementary groups will be set up properly.
Moby is an open source container framework originally developed by Docker Inc. as Docker. It is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. As a batteries-included container runtime, Moby comes with a built-in networking implementation that enables communication between containers, and between containers and external resources.
Moby's networking implementation allows for creating and using many networks, each with their own subnet and gateway. This feature is frequently referred to as custom networks, as each network can have a different driver, set of parameters, and thus behaviors. When creating a network, the --internal flag is used to designate a network as internal. The internal attribute in a docker-compose.yml file may also be used to mark a network internal, and other API clients may specify the internal parameter as well.
When containers with networking are created, they are assigned unique network interfaces and IP addresses (typically from a non-routable RFC 1918 subnet). The root network namespace (hereafter referred to as the 'host') serves as a router for non-internal networks, with a gateway IP that provides SNAT/DNAT to/from container IPs.
Containers on an internal network may communicate between each other, but are precluded from communicating with any networks the host has access to (LAN or WAN) as no default route is configured, and firewall rules are set up to drop all outgoing traffic. Communication with the gateway IP address (and thus appropriately configured host services) is possible, and the host may communicate with any container IP directly.
In addition to configuring the Linux kernel's various networking features to enable container networking, dockerd directly provides some services to container networks. Principal among these is serving as a resolver, enabling service discovery (looking up other containers on the network by name), and resolution of names from an upstream resolver.
When a DNS request for a name that does not correspond to a container is received, the request is forwarded to the configured upstream resolver (by default, the host's configured resolver). This request is made from the container network namespace: the level of access and routing of traffic is the same as if the request was made by the container itself.
As a consequence of this design, containers solely attached to internal network(s) will be unable to resolve names using the upstream resolver, as the container itself is unable to communicate with that nameserver. Only the names of containers also attached to the internal network are able to be resolved.
Many systems will run a local forwarding DNS resolver, typically present on a loopback address (127.0.0.0/8), such as systemd-resolved or dnsmasq. Common loopback address examples include 127.0.0.1 or 127.0.0.53. As the host and any containers have separate loopback devices, a consequence of the design described above is that containers are unable to resolve names from the host's configured resolver, as they cannot reach these addresses on the host loopback device.
To bridge this gap, and to allow containers to properly resolve names even when a local forwarding resolver is used on a loopback address, dockerd will detect this scenario and instead forward DNS requests from the host/root network namespace. The loopback resolver will then forward the requests to its configured upstream resolvers, as expected.
Impact
Because dockerd will forward DNS requests to the host loopback device, bypassing the container network namespace's normal routing semantics entirely, internal networks can unexpectedly forward DNS requests to an external nameserver.
By registering a domain for which they control the authoritative nameservers, an attacker could arrange for a compromised container to exfiltrate data by encoding it in DNS queries that will eventually be answered by their nameservers. For example, if the domain evil.example was registered, the authoritative nameserver(s) for that domain could (eventually and indirectly) receive a request for this-is-a-secret.evil.example.
Docker Desktop is not affected, as Docker Desktop always runs an internal resolver on a RFC 1918 address.
Patches
Moby releases 26.0.0-rc3, 25.0.5 (released) and 23.0.11 (to be released) are patched to prevent forwarding DNS requests from internal networks.
Workarounds
Run containers intended to be solely attached to internal networks with a custom upstream address (--dns argument to docker run, or API equivalent), which will force all upstream DNS queries to be resolved from the container network namespace.
Background
yair zak originally reported this issue to the Docker security team.
The official documentation claims that "the --internal flag that will completely isolate containers on a network from any communications external to that network," which necessitated this advisory and CVE.
Incorrect Permission Assignment for Critical Resource
Affected range
<20.10.14
Fixed version
20.10.14
CVSS Score
5.9
CVSS Vector
CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L
Description
Impact
A bug was found in Moby (Docker Engine) where containers were incorrectly started with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during execve(2). Normally, when executable programs have specified permitted file capabilities, otherwise unprivileged users and processes can execute those programs and gain the specified file capabilities up to the bounding set. Due to this bug, containers which included executable programs with inheritable file capabilities allowed otherwise unprivileged users and processes to additionally gain these inheritable file capabilities up to the container's bounding set. Containers which use Linux users and groups to perform privilege separation inside the container are most directly impacted.
This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set.
Patches
This bug has been fixed in Moby (Docker Engine) 20.10.14. Users should update to this version as soon as possible. Running containers should be stopped, deleted, and recreated for the inheritable capabilities to be reset.
This fix changes Moby (Docker Engine) behavior such that containers are started with a more typical Linux environment. Refer to capabilities(7) for a description of how capabilities work. Note that permitted file capabilities continue to allow for privileges to be raised up to the container's bounding set and that processes may add capabilities to their own inheritable set up to the container's bounding set per the rules described in the manual page. In all cases the container's bounding set provides an upper bound on the capabilities that can be assumed and provides for the container security sandbox.
Workarounds
The entrypoint of a container can be modified to use a utility like capsh(1) to drop inheritable capabilities prior to the primary process starting.
Intel's RAPL (Running Average Power Limit) feature, introduced by the Sandy Bridge microarchitecture, provides software insights into hardware energy consumption. To facilitate this, Intel introduced the powercap framework in Linux kernel 3.13, which reads values via relevant MSRs (model specific registers) and provides unprivileged userspace access via sysfs. As RAPL is an interface to access a hardware feature, it is only available when running on bare metal with the module compiled into the kernel.
By 2019, it was realized that in some cases unprivileged access to RAPL readings could be exploited as a power-based side-channel against security features including AES-NI (potentially inside a SGX enclave) and KASLR (kernel address space layout randomization). Also known as the PLATYPUS attack, Intel assigned CVE-2020-8694 and CVE-2020-8695, and AMD assigned CVE-2020-12912.
Several mitigations were applied; Intel reduced the sampling resolution via a microcode update, and the Linux kernel prevents access by non-root users since 5.10. However, this kernel-based mitigation does not apply to many container-based scenarios:
Unless using user namespaces, root inside a container has the same level of privilege as root outside the container, but with a slightly more narrow view of the system
sysfs is mounted inside containers read-only; however only read access is needed to carry out this attack on an unpatched CPU
While this is not a direct vulnerability in container runtimes, defense in depth and safe defaults are valuable and preferred, especially as this poses a risk to multi-tenant container environments running directly on affected hardware. This is provided by masking /sys/devices/virtual/powercap in the default mount configuration, and adding an additional set of rules to deny it in the default AppArmor profile.
While sysfs is not the only way to read from the RAPL subsystem, other ways of accessing it require additional capabilities such as CAP_SYS_RAWIO which is not available to containers by default, or perf paranoia level less than 1, which is a non-default kernel tunable.
Exposure of Sensitive Information to an Unauthorized Actor
Affected range
<=20.10.19
Fixed version
20.10.20
Description
Description
Moby is the open source Linux container runtime and set of components used to build a variety of downstream container runtimes, including Docker CE, Mirantis Container Runtime (formerly Docker EE), and Docker Desktop. Moby allows for building container images using a set of build instructions (usually named and referred to as a "Dockerfile"), and a build context, which is not unlike the CWD in which the Dockerfile instructions are executed.
Containers may be built using a variety of tools and build backends available in the Moby ecosystem; in all cases, builds may not include files outside of the build context (such as using absolute or relative-parent paths). This is enforced through both checks in the build backends, and the containerization of the build process itself.
Versions of Git where CVE-2022-39253 is present and exploited by a malicious repository, when used in combination with Moby, are subject to an unexpected inclusion of arbitrary filesystem paths in the build context, without any visible warning to the user.
This issue was originally reported by Wenxiang Qian of Tencent Blade Team, and the root-cause analysis was performed by Cory Snider of Mirantis, with assistance from Bjorn Neergaard of the same. The issue was then reported to the Git project, and Taylor Blau led the process resolving the root issue in Git.
Impact
This vulnerability originates in Git, but can be used to violate assumptions that may have security implications for users of Moby and related components. Users may rely on the fact that a build context ensures that outside files cannot be referenced or incorporated using multiple enforcement mechanisms, or expect a warning if this does not hold true. A maliciously crafted Git repository exploiting CVE-2022-39253 can violate this assumption, and potentially include sensitive files that are subsequently uploaded to a container image repository, or disclosed by code inside the resulting container image.
As this issue cannot be triggered remotely, except by users who already have full control over the daemon through the API, and it requires exploiting a vulnerability in Git by convincing a user to build a maliciously crafted repository, the impact in Moby is considered low.
Patches
Moby 20.10.20, and Mirantis Container Runtime (formerly Docker Enterprise Edition) 20.10.14 will contain mitigations for CVE-2022-39253 when a Git clone is performed by Moby components (on either the daemon or API client side). However, as these mitigations only apply to certain scenarios (build of git+<protocol>://... URL contexts) and cannot protect against a malicious repository already on disk, users should update to a version of Git containing patches for CVE-2022-39253 on all their systems running both API clients and daemons.
Specifically, patches in Moby (including patches incorporated from BuildKit) protect against the following:
docker build with the legacy builder (e.g. DOCKER_BUILDKIT unset or set to 0) of a Git URL context. Note that depending on available API versions and the CLI version, the Git clone operation can take place on either the client or the daemon side. Both must be updated (or have Git updated) to fully protect this build method.
docker build with the BuildKit builder (e.g. DOCKER_BUILDKIT=1) of a Git URL context.
docker buildx build with BUILDKIT_CONTEXT_KEEP_GIT_DIR=1 of a Git URL context.
Patches in BuildKit incorporated into Docker Compose protect against CVE-2022-39253 during Compose-driven builds of Git URL contexts.
Patches in Moby and related projects such as BuildKit, the Docker CLI, and Docker Compose cannot fully protect against CVE-2022-39253, as it may be triggered by a malicious repository already on disk that a unpatched Git client has interacted with (specifically, commands that check out submodules such as git clone --recursive, git submodule update, etc. may have already triggered the Git vulnerability).
Workarounds
While this behavior is unexpected and undesirable, and has resulted in this security advisory, users should keep in mind that building a container entails arbitrary code execution. Users should not build a repository/build context they do not trust, as containerization cannot protect against all possible attacks.
When building with BuildKit (e.g. docker buildx build or docker build with DOCKER_BUILDKIT=1), this issue cannot be exploited unless --build-arg BUILDKIT_CONTEXT_KEEP_GIT_DIR=1 was also passed, as by default BuildKit will discard the .git directory of a Git URL context immediately after cloning and checking out the repository.
For more information
If you have any questions or comments about this advisory:
OWASP Top Ten 2017 Category A9 - Using Components with Known Vulnerabilities
Affected range
<20.10.27
Fixed version
v24.0.7
Description
Intel's RAPL (Running Average Power Limit) feature, introduced by the Sandy Bridge microarchitecture, provides software insights into hardware energy consumption. To facilitate this, Intel introduced the powercap framework in Linux kernel 3.13, which reads values via relevant MSRs (model specific registers) and provides unprivileged userspace access via sysfs.
google.golang.org/grpc1.38.0 (golang)
pkg:golang/google.golang.org/grpc@1.38.0
Affected range
<1.56.3
Fixed version
1.56.3
CVSS Score
7.5
CVSS Vector
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Description
Impact
In affected releases of gRPC-Go, it is possible for an attacker to send HTTP/2 requests, cancel them, and send subsequent requests, which is valid by the HTTP/2 protocol, but would cause the gRPC-Go server to launch more concurrent method handlers than the configured maximum stream limit.
Patches
This vulnerability was addressed by #6703 and has been included in patch releases: 1.56.3, 1.57.1, 1.58.3. It is also included in the latest release, 1.59.0.
Along with applying the patch, users should also ensure they are using the grpc.MaxConcurrentStreams server option to apply a limit to the server's resources used for any single connection.
The HTTP/2 protocol allows clients to indicate to the server that a previous stream should be canceled by sending a RST_STREAM frame. The protocol does not require the client and server to coordinate the cancellation in any way, the client may do it unilaterally. The client may also assume that the cancellation will take effect immediately when the server receives the RST_STREAM frame, before any other data from that TCP connection is processed.
Abuse of this feature is called a Rapid Reset attack because it relies on the ability for an endpoint to send a RST_STREAM frame immediately after sending a request frame, which makes the other endpoint start working and then rapidly resets the request. The request is canceled, but leaves the HTTP/2 connection open.
The HTTP/2 Rapid Reset attack built on this capability is simple: The client opens a large number of streams at once as in the standard HTTP/2 attack, but rather than waiting for a response to each request stream from the server or proxy, the client cancels each request immediately.
The ability to reset streams immediately allows each connection to have an indefinite number of requests in flight. By explicitly canceling the requests, the attacker never exceeds the limit on the number of concurrent open streams. The number of in-flight requests is no longer dependent on the round-trip time (RTT), but only on the available network bandwidth.
In a typical HTTP/2 server implementation, the server will still have to do significant amounts of work for canceled requests, such as allocating new stream data structures, parsing the query and doing header decompression, and mapping the URL to a resource. For reverse proxy implementations, the request may be proxied to the backend server before the RST_STREAM frame is processed. The client on the other hand paid almost no costs for sending the requests. This creates an exploitable cost asymmetry between the server and the client.
Multiple software artifacts implementing HTTP/2 are affected. This advisory was originally ingested from the swift-nio-http2 repo advisory and their original conent follows.
swift-nio-http2 specific advisory
swift-nio-http2 is vulnerable to a denial-of-service vulnerability in which a malicious client can create and then reset a large number of HTTP/2 streams in a short period of time. This causes swift-nio-http2 to commit to a large amount of expensive work which it then throws away, including creating entirely new Channels to serve the traffic. This can easily overwhelm an EventLoop and prevent it from making forward progress.
swift-nio-http2 1.28 contains a remediation for this issue that applies reset counter using a sliding window. This constrains the number of stream resets that may occur in a given window of time. Clients violating this limit will have their connections torn down. This allows clients to continue to cancel streams for legitimate reasons, while constraining malicious actors.
OWASP Top Ten 2017 Category A9 - Using Components with Known Vulnerabilities
Affected range
<1.56.3
Fixed version
1.56.3, 1.57.1, 1.58.3
Description
Impact
In affected releases of gRPC-Go, it is possible for an attacker to send HTTP/2 requests, cancel them, and send subsequent requests, which is valid by the HTTP/2 protocol, but would cause the gRPC-Go server to launch more concurrent method handlers than the configured maximum stream limit.
Patches
This vulnerability was addressed by #6703 and has been included in patch releases: 1.56.3, 1.57.1, 1.58.3. It is also included in the latest release, 1.59.0.
Along with applying the patch, users should also ensure they are using the grpc.MaxConcurrentStreams server option to apply a limit to the server's resources used for any single connection.
Systems that run distribution built after a specific commit running on memory-restricted environments can suffer from denial of service by a crafted malicious /v2/_catalog API endpoint request.
Patches
Upgrade to at least 2.8.2-beta.1 if you are running v2.8.x release. If you use the code from the main branch, update at least to the commit after f55a6552b006a381d9167e328808565dd2bf77dc.
Workarounds
There is no way to work around this issue without patching. Restrict access to the affected API endpoint: see the recommendations section.
References
/v2/_catalog endpoint accepts a parameter to control the maximum amount of records returned (query string: n).
When not given the default n=100 is used. The server trusts that n has an acceptable value, however when using a
maliciously large value, it allocates an array/slice of n of strings before filling the slice with data.
This behaviour was introduced ~7yrs ago [1].
Recommendation
The /v2/_catalog endpoint was designed specifically to do registry syncs with search or other API systems. Such an endpoint would create a lot of load on the backend system, due to overfetch required to serve a request in certain implementations.
Because of this, we strongly recommend keeping this API endpoint behind heightened privilege and avoiding leaving it exposed to the internet.
For more information
If you have any questions or comments about this advisory:
Access of Resource Using Incompatible Type ('Type Confusion')
Affected range
<2.8.0
Fixed version
2.8.0
CVSS Score
3
CVSS Vector
CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:C/C:N/I:L/A:N
Description
Impact
Systems that rely on digest equivalence for image attestations may be vulnerable to type confusion.
Patches
Upgrade to at least v2.8.0-beta.1 if you are running v2.x release. If you use the code from the main branch, update at least to the commit after b59a6f827947f9e0e67df0cfb571046de4733586.
Workarounds
There is no way to work around this issue without patching.
References
Due to an oversight in the OCI Image Specification that removed the embedded mediaType field from manifests, a maliciously crafted OCI Container Image can cause registry clients to parse the same image in two different ways without modifying the image’s digest by modifying the Content-Type header returned by a registry. This can invalidate a common pattern of relying on container image digests for equivalence.
For more information
If you have any questions or comments about this advisory:
OWASP Top Ten 2017 Category A9 - Using Components with Known Vulnerabilities
Affected range
Fixed version
v2.8.0
Description
Impact
Systems that rely on digest equivalence for image attestations may be vulnerable to type confusion.
google.golang.org/protobuf1.27.1 (golang)
pkg:golang/google.golang.org/protobuf@1.27.1
Loop with Unreachable Exit Condition ('Infinite Loop')
Affected range
<1.33.0
Fixed version
1.33.0
Description
The protojson.Unmarshal function can enter an infinite loop when unmarshaling certain forms of invalid JSON. This condition can occur when unmarshaling into a message which contains a google.protobuf.Any value, or when the UnmarshalOptions.DiscardUnknown option is set.
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This PR contains the following updates:
0.0.14->0.0.15Warning
Some dependencies could not be looked up. Check the Dependency Dashboard for more information.
Release Notes
solo-io/bumblebee (solo-io/bumblebee)
v0.0.15Compare Source
Configuration
📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).
🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.
♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 Ignore: Close this PR and you won't be reminded about this update again.
This PR has been generated by Renovate Bot.