Restore fixes for Darp10 combo-jack #921
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
… mode [ Upstream commit baaf806 ] After enabling packet offload, the TX will be stuck after resume from WoWLAN mode. And the 8852c gets error messages like rtw89_8852ce 0000:04:00.0: No busy txwd pages available rtw89_8852ce 0000:04:00.0: queue 0 txwd 100 is not idle rtw89_8852ce 0000:04:00.0: queue 0 txwd 101 is not idle rtw89_8852ce 0000:04:00.0: queue 0 txwd 102 is not idle rtw89_8852ce 0000:04:00.0: queue 0 txwd 103 is not idle If suspend/resume many times that firmware will download failed and disconnection. To fix these issues, We removed the rtw89_hci_disable_intr() and rtw89_hci_enable_intr() during rtw89_wow_swap_fw() to prevent add packet offload can't receive c2h back due to interrupt disable. Only 8852C and 8922A needs to disable interrupt before downloading fw. Furthermore, we avoid using low power HCI mode on WoWLAN mode, to prevent interrupt enabled, then get interrupt and calculate RXBD mismatched due to software RXBD index already reset but hardware RXBD index not yet. Fixes: 5c12bb6 ("wifi: rtw89: refine packet offload flow") Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240502022505.28966-3-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45d5a2b ] There are a couple uses of bash specific syntax in the script. Change them to the equivalent POSIX syntax. This doesn't change functionality and allows non-bash test scripts to make use of these helpers. Reported-by: Mike Looijmans <mike.looijmans@topic.nl> Closes: https://lore.kernel.org/all/efae4037-c22a-40be-8ba9-7c1c12ece042@topic.nl/ Fixes: 2dd0b5a ("selftests: ktap_helpers: Add a helper to finish the test") Fixes: 14571ab ("kselftest: Add new test for detecting unprobed Devicetree devices") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b1c8b1 ] There is one use of bash specific syntax in the script. Change it to the equivalent POSIX syntax. This doesn't change functionality and allows the test to be run on shells other than bash. Reported-by: Mike Looijmans <mike.looijmans@topic.nl> Closes: https://lore.kernel.org/all/efae4037-c22a-40be-8ba9-7c1c12ece042@topic.nl/ Fixes: 4a679c5 ("selftests: Add test to verify power supply properties") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 019baf6 ] First of all, in order to build with clang at all, one must first apply Valentin Obst's build fix for LLVM [1]. Once that is done, then when building with clang, via: make LLVM=1 -C tools/testing/selftests ...the following error occurs: clang: error: cannot specify -o when generating multiple output files This is because clang, unlike gcc, won't accept invocations of this form: clang file1.c header2.h While trying to fix this, I noticed that: a) selftests/lib.mk already avoids the problem, and b) The binderfs Makefile indavertently bypasses the selftests/lib.mk build system, and quitely uses Make's implicit build rules for .c files instead. The Makefile attempts to set up both a dependency and a source file, neither of which was needed, because lib.mk is able to automatically handle both. This line: binderfs_test: binderfs_test.c ...causes Make's implicit rules to run, which builds binderfs_test without ever looking at lib.mk. Fix this by simply deleting the "binderfs_test:" Makefile target and letting lib.mk handle it instead. [1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/ Fixes: 6e29225 ("binderfs: port tests to test harness infrastructure") Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8171aa ] First of all, in order to build with clang at all, one must first apply Valentin Obst's build fix for LLVM [1]. Once that is done, then when building with clang, via: make LLVM=1 -C tools/testing/selftests ...the following error occurs: clang: error: cannot specify -o when generating multiple output files This is because clang, unlike gcc, won't accept invocations of this form: clang file1.c header2.h Fix this by using selftests/lib.mk facilities for tracking local header file dependencies: add them to LOCAL_HDRS, leaving only the .c files to be passed to the compiler. [1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/ Fixes: 8e289f4 ("selftests/resctrl: Add resctrl.h into build deps") Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e6fbd ] Align the behavior for gcc and clang builds by interpreting unset `ARCH` and `CROSS_COMPILE` variables in `LLVM` builds as a sign that the user wants to build for the host architecture. This patch preserves the properties that setting the `ARCH` variable to an unknown value will trigger an error that complains about insufficient information, and that a set `CROSS_COMPILE` variable will override the target triple that is determined based on presence/absence of `ARCH`. When compiling with clang, i.e., `LLVM` is set, an unset `ARCH` variable in combination with an unset `CROSS_COMPILE` variable, i.e., compiling for the host architecture, leads to compilation failures since `lib.mk` can not determine the clang target triple. In this case, the following error message is displayed for each subsystem that does not set `ARCH` in its own Makefile before including `lib.mk` (lines wrapped at 75 chrs): make[1]: Entering directory '/mnt/build/linux/tools/testing/selftests/ sysctl' ../lib.mk:33: *** Specify CROSS_COMPILE or add '--target=' option to lib.mk. Stop. make[1]: Leaving directory '/mnt/build/linux/tools/testing/selftests/ sysctl' In the same scenario a gcc build would default to the host architecture, i.e., it would use plain `gcc`. Fixes: 795285e ("selftests: Fix clang cross compilation") Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8aa1b9 ] There is a race condition when a kthread finishes after the deadline and before the call to kthread_stop(), which may lead to use after free. Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Fixes: adf5054 ("kunit: fix UAF when run kfence test case test_gfpzero") Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20240408074625.65017-3-mic@digikod.net Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fabd480 ] kunit_init_device() should unregister the device on bus register error, but mistakenly it tries to unregister the bus. Unregister the device instead of the bus. Signed-off-by: Wander Lairson Costa <wander@redhat.com> Fixes: d03c720 ("kunit: Add APIs for managing devices") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…uites to test [ Upstream commit 5496b9b ] Commit c72a870 added a mutex to prevent kunit tests from running concurrently. Unfortunately that mutex gets locked during module load regardless of whether the module actually has any kunit tests. This causes a problem for kunit tests that might need to load other kernel modules (e.g. gss_krb5_test loading the camellia module). So check to see if there are actually any tests to run before locking the kunit_run_lock mutex. Fixes: c72a870 ("kunit: add ability to run tests after boot using debugfs") Reported-by: Nico Pache <npache@redhat.com> Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e549b39 ] Cast operation has a higher precedence than addition. The code here wants to zero the 2nd half of the 64-bit metadata, but due to a pointer arithmetic mistake, it writes the zero at offset 16 instead. Just adding parentheses around "data + 4" would fix this, but I think this will be slightly better readable with array syntax. I was unable to test this with tools/testing/selftests/bpf/vmtest.sh, because my glibc is newer than glibc in the provided VM image. So I just checked the difference in the compiled code. objdump -S tools/testing/selftests/bpf/xdp_do_redirect.test.o: - *((__u32 *)data) = 0x42; /* metadata test value */ + ((__u32 *)data)[0] = 0x42; /* metadata test value */ be7: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax bee: c7 00 42 00 00 00 movl $0x42,(%rax) - *((__u32 *)data + 4) = 0; + ((__u32 *)data)[1] = 0; bf4: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax - bfb: 48 83 c0 10 add $0x10,%rax + bfb: 48 83 c0 04 add $0x4,%rax bff: c7 00 00 00 00 00 movl $0x0,(%rax) Fixes: 5640b6d ("selftests/bpf: fix "metadata marker" getting overwritten by the netstack") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20240506145023.214248-1-mschmidt@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6baa452 ] Add a check for the return value of pci_alloc_irq_vectors() and return error if it fails. [jkosina@suse.com: reworded changelog based on Srinivas' suggestion] Fixes: 74fbc7d ("HID: intel-ish-hid: add MSI interrupt support") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d0cec ] Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 9f30b67 ("bfa: replace 2 kzalloc/copy_from_user by memdup_user") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0184a3 ] Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 61d8658 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 998d09c ] DebugFS output for fw_resource_count shows: estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141] estimate exchange2 used[0] high water limit [1945] Which shows incorrect display due to missing newline in seq_print(). [mkp: fix checkpatch warning about space before newline] Fixes: 5f63a16 ("scsi: qla2xxx: Fix exchange oversubscription for management commands") Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f45fe2 ] The generic_handle_domain_irq() function calls irq_resolve_mapping(). Thus delete a duplicative irq_find_mapping() call so that a stack trace and an RCU stall will be avoided. Fixes: c4f8457 ("gpio: nuvoton: Add Nuvoton NPCM sgpio driver") Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240506064244.1645922-1-JJLIU0@nuvoton.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9f67e5 ] For configurations that have the kconfig option NUMA_KEEP_MEMINFO disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1). SRAT lookup fails then because an existing SRAT memory range cannot be found for a CFMWS address range. This causes the addition of a duplicate numa_memblk with a different node id and a subsequent page fault and kernel crash during boot. Fix this by making numa_fill_memblks() always available regardless of NUMA_KEEP_MEMINFO. As Dan suggested, the fix is implemented to remove numa_fill_memblks() from sparsemem.h and alos using __weak for the function. Note that the issue was initially introduced with [1]. But since phys_to_target_node() was originally used that returned the valid node 0, an additional numa_memblk was not added. Though, the node id was wrong too, a message is seen then in the logs: kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n", [1] commit fd49f99 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT") Suggested-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/ Fixes: 8f10046 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Robert Richter <rrichter@amd.com> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d60eab ] This loop is supposed to copy the mac address to cmd->addr but the i++ increment is missing so it copies everything to cmd->addr[0] and only the last address is recorded. Fixes: 22bedad ("net: convert multicast list to list_head") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 077e3e3 ] Resume or suspend each sensor device based on the num_hid_devices. Therefore, add a check to handle the special case where no sensors are present. Fixes: 93ce5e0 ("HID: amd_sfh: Implement SFH1.1 functionality") Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53e2415 ] Our subpage testing started hanging on generic/560 and I bisected it down to 1cab137 ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations"). This is subtle because we use eb->start to figure out where in the folio we're copying to when we're subpage, as our ->start may refer to an area inside of the folio. For example, assume a 16K page size machine with a 4K node size, and assume that we already have a cloned extent buffer when we cloned the previous search. copy_extent_buffer_full() will do the following when copying the extent buffer path->nodes[0] (src) into cloned (dest): src->start = 8k; // this is the new leaf we're cloning cloned->start = 4k; // this is left over from the previous clone src_addr = folio_address(src->folios[0]); dest_addr = folio_address(dest->folios[0]); memcpy(dest_addr + get_eb_offset_in_folio(dst, 0), src_addr + get_eb_offset_in_folio(src, 0), src->len); Now get_eb_offset_in_folio() is where the problems occur, because for sub-pagesize blocksize we can have multiple eb's per folio, the code for this is as follows size_t get_eb_offset_in_folio(eb, offset) { return (eb->start + offset & (folio_size(eb->folio[0]) - 1)); } So in the above example we are copying into offset 4K inside the folio. However once we update cloned->start to 8K to match the src the math for get_eb_offset_in_folio() changes, and any subsequent reads (i.e. btrfs_item_key_to_cpu()) will start reading from the offset 8K instead of 4K where we copied to, giving us garbage. Fix this by setting start before we co copy_extent_buffer_full() to make sure that we're copying into the same offset inside of the folio that we will read from later. All other sites of copy_extent_buffer_full() are correct because we either set ->start beforehand or we simply don't change it in the case of the tree-log usage. With this fix we now pass generic/560 on our subpage tests. Fixes: 1cab137 ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations") Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aad6e4 ] Some usb drivers try to set small skb->truesize and break core networking stacks. I replace one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c611 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5 ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: 361459c ("net: usb: aqc111: Implement RX data path") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05417aa ] Some usb drivers set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c611 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5 ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: c9b3745 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da89ce4 ] Context switching does take care to retain the correct lock owner across the switch from 'prev' to 'next' tasks. This does rely on interrupts remaining disabled for the entire duration of the switch. This condition is guaranteed for normal process creation and context switching between already running processes, because both 'prev' and 'next' already have interrupts disabled in their saved copies of the status register. The situation is different for newly created kernel threads. The status register is set to PS_S in copy_thread(), which does leave the IPL at 0. Upon restoring the 'next' thread's status register in switch_to() aka resume(), interrupts then become enabled prematurely. resume() then returns via ret_from_kernel_thread() and schedule_tail() where run queue lock is released (see finish_task_switch() and finish_lock_switch()). A timer interrupt calling scheduler_tick() before the lock is released in finish_task_switch() will find the lock already taken, with the current task as lock owner. This causes a spinlock recursion warning as reported by Guenter Roeck. As far as I can ascertain, this race has been opened in commit 533e690 ("m68k: split ret_from_fork(), simplify kernel_thread()") but I haven't done a detailed study of kernel history so it may well predate that commit. Interrupts cannot be disabled in the saved status register copy for kernel threads (init will complain about interrupts disabled when finally starting user space). Disable interrupts temporarily when switching the tasks' register sets in resume(). Note that a simple oriw 0x700,%sr after restoring sr is not enough here - this leaves enough of a race for the 'spinlock recursion' warning to still be observed. Tested on ARAnyM and qemu (Quadra 800 emulation). Fixes: 533e690 ("m68k: split ret_from_fork(), simplify kernel_thread()") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/all/07811b26-677c-4d05-aeb4-996cd880b789@roeck-us.net Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240411033631.16335-1-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 265a3b3 ] Calling mac_reset() on a Mac IIci does reset the system, but what follows is a POST failure that requires a manual reset to resolve. Avoid that by using the 68030 asm implementation instead of the C implementation. Apparently the SE/30 has a similar problem as it has used the asm implementation since before git. This patch extends that solution to other systems with a similar ROM. After this patch, the only systems still using the C implementation are 68040 systems where adb_type is either MAC_ADB_IOP or MAC_ADB_II. This implies a 1 MiB Quadra ROM. This now includes the Quadra 900/950, which previously fell through to the "should never get here" catch-all. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/480ebd1249d229c6dc1f3f1c6d599b8505483fd8.1714797072.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66b7b9 ] Move the recently added ARCH_HAS_CPU_CACHE_ALIASING to restore alphabetical sort order. Fixes: 8690bbc ("Introduce cpu_dcache_is_aliasing() across all architectures") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/r/4574ad6cc1117e4b5d29812c165bf7f6e5b60773.1714978406.git.geert@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daef47b ] Add the -D_GNU_SOURCE flag to KHDR_INCLUDES so that it is defined in a central location. Commit 8092162 ("selftests/harness: remove use of LINE_MAX") introduced asprintf into kselftest_harness.h, which is a GNU extension and needs _GNU_SOURCE to either be defined prior to including headers or with the -D_GNU_SOURCE flag passed to the compiler. Fixed up commit log: Shuah Khan <skhan@linuxfoundation.org> Fixes: 8092162 ("selftests/harness: remove use of LINE_MAX") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404301040.3bea5782-oliver.sang@intel.com Signed-off-by: Edward Liaw <edliaw@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c3b8f8 ] Add KHDR_INCLUDES to the CFLAGS to pull in the kselftest harness dependencies (-D_GNU_SOURCE). Also, remove redefinitions of _GNU_SOURCE in the source code. Fixes: 8092162 ("selftests/harness: remove use of LINE_MAX") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404301040.3bea5782-oliver.sang@intel.com Signed-off-by: Edward Liaw <edliaw@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d24790 ] delay_timer could be pending when delay_dtr() is called. It needs to be shut down before kdelayd_wq is destroyed, so it won't try queueing more work to kdelayd_wq while that's getting destroyed. Also the del_timer_sync() call in delay_presuspend() doesn't protect against the timer getting immediately rearmed by the queued call to flush_delayed_bios(), but there's no real harm if that does happen. timer_delete() is less work, and is basically just as likely to stop a pointless call to flush_delayed_bios(). Fixes: 26b9f22 ("dm: delay target") Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d14646f ] If the worker thread is not woken due to a bio, then it is not woken at all. This causes the hung task check to trigger. This occurs, for instance, when no bios are submitted. Also when a delay of 0 is configured, delay_bio() returns without waking the worker. Prevent the hung task check from triggering by creating the thread with kthread_run() instead of using kthread_create() directly. Fixes: 70bbeb2 ("dm delay: for short delays, use kthread instead of timers and wq") Signed-off-by: Joel Colledge <joel.colledge@linbit.com> Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64eb88d ] delay_ctr() pointlessly compared max_delay in cases where multiple delay classes were initialized identically. Also, when write delays were configured different than read delays, delay_ctr() never compared their value against max_delay. Fix these issues. Fixes: 70bbeb2 ("dm delay: for short delays, use kthread instead of timers and wq") Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2c7897 ] In ptp_ocp driver pin actions assume sma_nr starts with 1, but for DPLL subsystem callback 0-based index was used. Fix it providing proper index. Fixes: 09eeb3a ("ptp_ocp: implement DPLL ops") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20240508132111.11545-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…flags BugLink: [Replace -fcf-protection=none patch with new version] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline support to prevents such build failures. Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1585311 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Michael Aaron Murphy <michael@mmurphy.dev>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <tcrawford@system76.com>
Asus released motherboard(s) with an alternate ALC4080 that lacks a SPDIF jack, and requires applying this map.
The Aorus Xtreme uses the same ID for audio controller, but the maps are very different. This successfully fixes all of the audio jacks on the back.
When plugging of unplugging an audio jack on this motherbaord, sometimes the audio jacks would stop appearing to pipewire/pulseaudio. Interestingly `cat`-ing out the file `/proc/asound/<card number>/codec#0`, and or restarting pipewire fixes the issue temporarily. This PR improves the current functionality by making hotplug with one 3.5mm jack work, it still breaks if hotplug is between multiple jacks though.
This reverts commit 86f4c65.
This reverts commit b38f2d5.
This reverts commit 81f6650.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
This reverts commit 112a7f9.
…405300957 Signed-off-by: Michael Aaron Murphy <michael@mmurphy.dev>
This reverts commit 0470d83. Barlow Ridge removes support for FWCM. Signed-off-by: Tim Crawford <tcrawford@system76.com>
and Clevo V540TU systems
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This one-line PR restores @crawfxrd 's fix for darp10 & darp10-b systems (based on Clevo V540TU/V560TU systems) and addresses pop-os#330