remove the acheive sp error

drivers/clk/rockchip/clk-cpu.c

@@ -19,7 +19,7 @@
  * clock and the corresponding rate changes of the auxillary clocks of the CPU
  * domain. The platform clock driver provides a clock register configuration
  * for each configurable rate which is then used to program the clock hardware
- * registers to acheive a fast co-oridinated rate change for all the CPU domain
+ * registers to achieve a fast co-oridinated rate change for all the CPU domain
  * clocks.
  *
  * On a rate change request for the CPU clock, the rate change is propagated

drivers/clk/samsung/clk-cpu.c

@@ -19,7 +19,7 @@
  * clock and the corresponding rate changes of the auxillary clocks of the CPU
  * domain. The platform clock driver provides a clock register configuration
  * for each configurable rate which is then used to program the clock hardware
- * registers to acheive a fast co-oridinated rate change for all the CPU domain
+ * registers to achieve a fast co-oridinated rate change for all the CPU domain
  * clocks.
  *
  * On a rate change request for the CPU clock, the rate change is propagated

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -185,7 +185,7 @@ void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
 
 	/* this defines the configuration for RL (Interrupt Rate Limiter).
 	 * Rl defines rate of interrupts i.e. number of interrupts-per-second
-	 * GL and RL(Rate Limiter) are 2 ways to acheive interrupt coalescing
+	 * GL and RL(Rate Limiter) are 2 ways to achieve interrupt coalescing
 	 */
 
 	if (rl_reg > 0 && !tqp_vector->tx_group.coal.gl_adapt_enable &&

fs/xfs/xfs_inode.c

@@ -2574,7 +2574,7 @@ xfs_ifree_cluster(
 		 * only using to mark the buffer as stale in the log, and to
 		 * attach stale cached inodes on it. That means it will never be
 		 * dispatched for IO. If it is, we want to know about it, and we
-		 * want it to fail. We can acheive this by adding a write
+		 * want it to fail. We can achieve this by adding a write
 		 * verifier to the buffer.
 		 */
 		bp->b_ops = &xfs_inode_buf_ops;