Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

X2apic #288

Open
wants to merge 9 commits into
base: master
Choose a base branch
from
Open

X2apic #288

wants to merge 9 commits into from

Conversation

lantianyu
Copy link
Contributor

No description provided.

kvm_irq_delivery_to_apic_fast and kvm_intr_is_single_vcpu_fast both
compute the interrupt destination.  Factor the code.

'struct kvm_lapic **dst = NULL' had to be added to silence GCC.
GCC might complain about potential NULL access in the future, because it
missed conditions that avoided uninitialized uses of dst.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
x2APIC supports up to 2^32-1 LAPICs, but most guest in coming years will
have slighly less VCPUs.  Dynamic size saves memory at the cost of
turning one constant into a variable.

apic_map mutex had to be moved before allocation to avoid races with cpu
hotplug.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
for_all_bits() never were type safe, so we don't lose safety when
casting u16 * to unsigned long * and u16 is the size we want to avoid
mishaps when sending the pointer to functions that operate only on 16
bits.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
We need a way to pass 32 bit APIC ID.  Intel® Virtualization Technology
for Directed I/O, 5.1.8 Programming in Intel® 64 x2APIC Mode, specifies
that Remapping Hardware is configured with APIC ID 31:8 in Upper Address
Register 31:8.  This patch adopts that method and applies it to
KVM_SIGNAL_MSI and GSI routes.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The get/set dance was just for that.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
We currently always shift APIC ID as if APIC was in xAPIC mode.
x2APIC mode wants to use more bits and storing a hardware-compabible
value is the the sanest option.  VMX can stop intercepting the APIC ID
register then.

KVM API to set the lapic expects that bottom 8 bits of APIC ID are in
top 8 bits of APIC_ID register.  Definite that x2APIC IDs are byte
swapped to keep compatibility without new toggles.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
LAPIC is reset in xAPIC mode and the surrounding code expects that.
KVM never resets after initialization, so this patch is just for sanity.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
288 is in high demand because of Knights Landing CPU.
We cannot set the limit to 640k, because that would be wasting space.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017
lkl: filter null bytes from syscall_defs.h
fengguang pushed a commit to 0day-ci/linux that referenced this pull request May 12, 2017
Add missing parenthesis around if/else statement to comply with checkpatch.pl
following check :

Unbalanced braces around else statement
torvalds#288: FILE: drivers/staging/fbtft/fb_agm1264k-fl.c:288:
+			else {

Signed-off-by: Alexis Lothoré <alexis.lothore@gmail.com>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Sep 23, 2018
This commits adds verifier tests covering per-cpu cgroup storage
functionality. There are 6 new tests, which are exactly the same
as for shared cgroup storage, but do use per-cpu cgroup storage
map.

Expected output:
  $ ./test_verifier
  #0/u add+sub+mul OK
  #0/p add+sub+mul OK
  ...
  torvalds#286/p invalid cgroup storage access 6 OK
  torvalds#287/p valid per-cpu cgroup storage access OK
  torvalds#288/p invalid per-cpu cgroup storage access 1 OK
  torvalds#289/p invalid per-cpu cgroup storage access 2 OK
  torvalds#290/p invalid per-cpu cgroup storage access 3 OK
  torvalds#291/p invalid per-cpu cgroup storage access 4 OK
  torvalds#292/p invalid per-cpu cgroup storage access 5 OK
  torvalds#293/p invalid per-cpu cgroup storage access 6 OK
  torvalds#294/p multiple registers share map_lookup_elem result OK
  ...
  torvalds#662/p mov64 src == dst OK
  torvalds#663/p mov64 src != dst OK
  Summary: 914 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
joestringer pushed a commit to joestringer/linux that referenced this pull request Sep 27, 2018
This commits adds verifier tests covering per-cpu cgroup storage
functionality. There are 6 new tests, which are exactly the same
as for shared cgroup storage, but do use per-cpu cgroup storage
map.

Expected output:
  $ ./test_verifier
  #0/u add+sub+mul OK
  #0/p add+sub+mul OK
  ...
  torvalds#286/p invalid cgroup storage access 6 OK
  torvalds#287/p valid per-cpu cgroup storage access OK
  torvalds#288/p invalid per-cpu cgroup storage access 1 OK
  torvalds#289/p invalid per-cpu cgroup storage access 2 OK
  torvalds#290/p invalid per-cpu cgroup storage access 3 OK
  torvalds#291/p invalid per-cpu cgroup storage access 4 OK
  torvalds#292/p invalid per-cpu cgroup storage access 5 OK
  torvalds#293/p invalid per-cpu cgroup storage access 6 OK
  torvalds#294/p multiple registers share map_lookup_elem result OK
  ...
  torvalds#662/p mov64 src == dst OK
  torvalds#663/p mov64 src != dst OK
  Summary: 914 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Sep 28, 2018
This commits adds verifier tests covering per-cpu cgroup storage
functionality. There are 6 new tests, which are exactly the same
as for shared cgroup storage, but do use per-cpu cgroup storage
map.

Expected output:
  $ ./test_verifier
  #0/u add+sub+mul OK
  #0/p add+sub+mul OK
  ...
  torvalds#286/p invalid cgroup storage access 6 OK
  torvalds#287/p valid per-cpu cgroup storage access OK
  torvalds#288/p invalid per-cpu cgroup storage access 1 OK
  torvalds#289/p invalid per-cpu cgroup storage access 2 OK
  torvalds#290/p invalid per-cpu cgroup storage access 3 OK
  torvalds#291/p invalid per-cpu cgroup storage access 4 OK
  torvalds#292/p invalid per-cpu cgroup storage access 5 OK
  torvalds#293/p invalid per-cpu cgroup storage access 6 OK
  torvalds#294/p multiple registers share map_lookup_elem result OK
  ...
  torvalds#662/p mov64 src == dst OK
  torvalds#663/p mov64 src != dst OK
  Summary: 914 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
joestringer pushed a commit to joestringer/linux that referenced this pull request Oct 2, 2018
This commits adds verifier tests covering per-cpu cgroup storage
functionality. There are 6 new tests, which are exactly the same
as for shared cgroup storage, but do use per-cpu cgroup storage
map.

Expected output:
  $ ./test_verifier
  #0/u add+sub+mul OK
  #0/p add+sub+mul OK
  ...
  torvalds#286/p invalid cgroup storage access 6 OK
  torvalds#287/p valid per-cpu cgroup storage access OK
  torvalds#288/p invalid per-cpu cgroup storage access 1 OK
  torvalds#289/p invalid per-cpu cgroup storage access 2 OK
  torvalds#290/p invalid per-cpu cgroup storage access 3 OK
  torvalds#291/p invalid per-cpu cgroup storage access 4 OK
  torvalds#292/p invalid per-cpu cgroup storage access 5 OK
  torvalds#293/p invalid per-cpu cgroup storage access 6 OK
  torvalds#294/p multiple registers share map_lookup_elem result OK
  ...
  torvalds#662/p mov64 src == dst OK
  torvalds#663/p mov64 src != dst OK
  Summary: 914 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 15, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#12: FILE: ./hal/HalBtc8723b1Ant.c:12:
    +static struct COEX_DM_8723B_1ANT * pCoexDm = &GLCoexDm8723b1Ant;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#14: FILE: ./hal/HalBtc8723b1Ant.c:14:
    +static struct COEX_STA_8723B_1ANT * pCoexSta = &GLCoexSta8723b1Ant;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#154: FILE: ./hal/HalBtc8723b1Ant.c:154:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u32 disRateMask

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#169: FILE: ./hal/HalBtc8723b1Ant.c:169:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#207: FILE: ./hal/HalBtc8723b1Ant.c:207:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#234: FILE: ./hal/HalBtc8723b1Ant.c:234:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#260: FILE: ./hal/HalBtc8723b1Ant.c:260:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#288: FILE: ./hal/HalBtc8723b1Ant.c:288:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#317: FILE: ./hal/HalBtc8723b1Ant.c:317:
    +static void halbtc8723b1ant_QueryBtInfo(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#334: FILE: ./hal/HalBtc8723b1Ant.c:334:
    +static void halbtc8723b1ant_MonitorBtCtr(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#395: FILE: ./hal/HalBtc8723b1Ant.c:395:
    +static void halbtc8723b1ant_MonitorWiFiCtr(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#481: FILE: ./hal/HalBtc8723b1Ant.c:481:
    +static bool halbtc8723b1ant_IsWifiStatusChanged(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#516: FILE: ./hal/HalBtc8723b1Ant.c:516:
    +static void halbtc8723b1ant_UpdateBtLinkInfo(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#518: FILE: ./hal/HalBtc8723b1Ant.c:518:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#580: FILE: ./hal/HalBtc8723b1Ant.c:580:
    +static u8 halbtc8723b1ant_ActionAlgorithm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#582: FILE: ./hal/HalBtc8723b1Ant.c:582:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#808: FILE: ./hal/HalBtc8723b1Ant.c:808:
    +	struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRa

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#836: FILE: ./hal/HalBtc8723b1Ant.c:836:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bLowPenaltyRa

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#853: FILE: ./hal/HalBtc8723b1Ant.c:853:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#890: FILE: ./hal/HalBtc8723b1Ant.c:890:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#933: FILE: ./hal/HalBtc8723b1Ant.c:933:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #991: FILE: ./hal/HalBtc8723b1Ant.c:991:
    +	struct BTC_COEXIST * pBtCoexist, bool bEnable

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1012: FILE: ./hal/HalBtc8723b1Ant.c:1012:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bEnable

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1046: FILE: ./hal/HalBtc8723b1Ant.c:1046:
    +	struct BTC_COEXIST * pBtCoexist, u8 lpsVal, u8 rpwmVal

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1057: FILE: ./hal/HalBtc8723b1Ant.c:1057:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 lpsVal, u8 rpwmVal

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1108: FILE: ./hal/HalBtc8723b1Ant.c:1108:
    +	struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRA

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1121: FILE: ./hal/HalBtc8723b1Ant.c:1121:
    +	struct BTC_COEXIST * pBtCoexist, u8 antPosType, bool bInitHwCfg, bool bWifiOff

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1124: FILE: ./hal/HalBtc8723b1Ant.c:1124:
    +	struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1310: FILE: ./hal/HalBtc8723b1Ant.c:1310:
    +	struct BTC_COEXIST * pBtCoexist, u8 byte1, u8 byte2, u8 byte3, u8 byte4, u8 byte5

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1364: FILE: ./hal/HalBtc8723b1Ant.c:1364:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bTurnOn, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1367: FILE: ./hal/HalBtc8723b1Ant.c:1367:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1664: FILE: ./hal/HalBtc8723b1Ant.c:1664:
    +static bool halbtc8723b1ant_IsCommonAction(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1755: FILE: ./hal/HalBtc8723b1Ant.c:1755:
    +	struct BTC_COEXIST * pBtCoexist, u8 wifiStatus

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1944: FILE: ./hal/HalBtc8723b1Ant.c:1944:
    +	struct BTC_COEXIST * pBtCoexist, bool bNewPsState

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1966: FILE: ./hal/HalBtc8723b1Ant.c:1966:
    +	struct BTC_COEXIST * pBtCoexist, u8 psType, u8 lpsVal, u8 rpwmVal

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2014: FILE: ./hal/HalBtc8723b1Ant.c:2014:
    +static void halbtc8723b1ant_ActionWifiMultiPort(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2022: FILE: ./hal/HalBtc8723b1Ant.c:2022:
    +static void halbtc8723b1ant_ActionHs(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2028: FILE: ./hal/HalBtc8723b1Ant.c:2028:
    +static void halbtc8723b1ant_ActionBtInquiry(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2030: FILE: ./hal/HalBtc8723b1Ant.c:2030:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2070: FILE: ./hal/HalBtc8723b1Ant.c:2070:
    +	struct BTC_COEXIST * pBtCoexist, u8 wifiStatus

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2073: FILE: ./hal/HalBtc8723b1Ant.c:2073:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2090: FILE: ./hal/HalBtc8723b1Ant.c:2090:
    +	struct BTC_COEXIST * pBtCoexist, u8 wifiStatus

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2095: FILE: ./hal/HalBtc8723b1Ant.c:2095:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2144: FILE: ./hal/HalBtc8723b1Ant.c:2144:
    +static void halbtc8723b1ant_ActionWifiNotConnected(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2155: FILE: ./hal/HalBtc8723b1Ant.c:2155:
    +	struct BTC_COEXIST * pBtCoexist

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2158: FILE: ./hal/HalBtc8723b1Ant.c:2158:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2189: FILE: ./hal/HalBtc8723b1Ant.c:2189:
    +	struct BTC_COEXIST * pBtCoexist

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2192: FILE: ./hal/HalBtc8723b1Ant.c:2192:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2213: FILE: ./hal/HalBtc8723b1Ant.c:2213:
    +static void halbtc8723b1ant_ActionWifiConnectedScan(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2215: FILE: ./hal/HalBtc8723b1Ant.c:2215:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2246: FILE: ./hal/HalBtc8723b1Ant.c:2246:
    +	struct BTC_COEXIST * pBtCoexist

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2249: FILE: ./hal/HalBtc8723b1Ant.c:2249:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2270: FILE: ./hal/HalBtc8723b1Ant.c:2270:
    +static void halbtc8723b1ant_ActionWifiConnected(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2390: FILE: ./hal/HalBtc8723b1Ant.c:2390:
    +static void halbtc8723b1ant_RunSwCoexistMechanism(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2449: FILE: ./hal/HalBtc8723b1Ant.c:2449:
    +static void halbtc8723b1ant_RunCoexistMechanism(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2451: FILE: ./hal/HalBtc8723b1Ant.c:2451:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2582: FILE: ./hal/HalBtc8723b1Ant.c:2582:
    +static void halbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2596: FILE: ./hal/HalBtc8723b1Ant.c:2596:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2651: FILE: ./hal/HalBtc8723b1Ant.c:2651:
    +void EXhalbtc8723b1ant_PowerOnSetting(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2653: FILE: ./hal/HalBtc8723b1Ant.c:2653:
    +	struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2703: FILE: ./hal/HalBtc8723b1Ant.c:2703:
    +void EXhalbtc8723b1ant_InitHwConfig(struct BTC_COEXIST * pBtCoexist, bool bWifiOnly)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2708: FILE: ./hal/HalBtc8723b1Ant.c:2708:
    +void EXhalbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2723: FILE: ./hal/HalBtc8723b1Ant.c:2723:
    +void EXhalbtc8723b1ant_DisplayCoexInfo(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2725: FILE: ./hal/HalBtc8723b1Ant.c:2725:
    +	struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2726: FILE: ./hal/HalBtc8723b1Ant.c:2726:
    +	struct BTC_STACK_INFO * pStackInfo = &pBtCoexist->stackInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2727: FILE: ./hal/HalBtc8723b1Ant.c:2727:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3186: FILE: ./hal/HalBtc8723b1Ant.c:3186:
    +void EXhalbtc8723b1ant_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3212: FILE: ./hal/HalBtc8723b1Ant.c:3212:
    +void EXhalbtc8723b1ant_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3230: FILE: ./hal/HalBtc8723b1Ant.c:3230:
    +void EXhalbtc8723b1ant_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3320: FILE: ./hal/HalBtc8723b1Ant.c:3320:
    +void EXhalbtc8723b1ant_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3377: FILE: ./hal/HalBtc8723b1Ant.c:3377:
    +void EXhalbtc8723b1ant_MediaStatusNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3447: FILE: ./hal/HalBtc8723b1Ant.c:3447:
    +void EXhalbtc8723b1ant_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3536: FILE: ./hal/HalBtc8723b1Ant.c:3536:
    +	struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3701: FILE: ./hal/HalBtc8723b1Ant.c:3701:
    +void EXhalbtc8723b1ant_HaltNotify(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3716: FILE: ./hal/HalBtc8723b1Ant.c:3716:
    +void EXhalbtc8723b1ant_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3738: FILE: ./hal/HalBtc8723b1Ant.c:3738:
    +void EXhalbtc8723b1ant_Periodical(struct BTC_COEXIST * pBtCoexist)

Signed-off-by: Marco Cesati <marcocesati@gmail.com>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 16, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#12: FILE: ./hal/HalBtc8723b1Ant.c:12:
    +static struct COEX_DM_8723B_1ANT * pCoexDm = &GLCoexDm8723b1Ant;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#14: FILE: ./hal/HalBtc8723b1Ant.c:14:
    +static struct COEX_STA_8723B_1ANT * pCoexSta = &GLCoexSta8723b1Ant;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#154: FILE: ./hal/HalBtc8723b1Ant.c:154:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u32 disRateMask

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#169: FILE: ./hal/HalBtc8723b1Ant.c:169:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#207: FILE: ./hal/HalBtc8723b1Ant.c:207:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#234: FILE: ./hal/HalBtc8723b1Ant.c:234:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#260: FILE: ./hal/HalBtc8723b1Ant.c:260:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#288: FILE: ./hal/HalBtc8723b1Ant.c:288:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#317: FILE: ./hal/HalBtc8723b1Ant.c:317:
    +static void halbtc8723b1ant_QueryBtInfo(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#334: FILE: ./hal/HalBtc8723b1Ant.c:334:
    +static void halbtc8723b1ant_MonitorBtCtr(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#395: FILE: ./hal/HalBtc8723b1Ant.c:395:
    +static void halbtc8723b1ant_MonitorWiFiCtr(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#481: FILE: ./hal/HalBtc8723b1Ant.c:481:
    +static bool halbtc8723b1ant_IsWifiStatusChanged(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#516: FILE: ./hal/HalBtc8723b1Ant.c:516:
    +static void halbtc8723b1ant_UpdateBtLinkInfo(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#518: FILE: ./hal/HalBtc8723b1Ant.c:518:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#580: FILE: ./hal/HalBtc8723b1Ant.c:580:
    +static u8 halbtc8723b1ant_ActionAlgorithm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#582: FILE: ./hal/HalBtc8723b1Ant.c:582:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#808: FILE: ./hal/HalBtc8723b1Ant.c:808:
    +	struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRa

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#836: FILE: ./hal/HalBtc8723b1Ant.c:836:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bLowPenaltyRa

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#853: FILE: ./hal/HalBtc8723b1Ant.c:853:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#890: FILE: ./hal/HalBtc8723b1Ant.c:890:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#933: FILE: ./hal/HalBtc8723b1Ant.c:933:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #991: FILE: ./hal/HalBtc8723b1Ant.c:991:
    +	struct BTC_COEXIST * pBtCoexist, bool bEnable

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1012: FILE: ./hal/HalBtc8723b1Ant.c:1012:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bEnable

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1046: FILE: ./hal/HalBtc8723b1Ant.c:1046:
    +	struct BTC_COEXIST * pBtCoexist, u8 lpsVal, u8 rpwmVal

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1057: FILE: ./hal/HalBtc8723b1Ant.c:1057:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 lpsVal, u8 rpwmVal

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1108: FILE: ./hal/HalBtc8723b1Ant.c:1108:
    +	struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRA

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1121: FILE: ./hal/HalBtc8723b1Ant.c:1121:
    +	struct BTC_COEXIST * pBtCoexist, u8 antPosType, bool bInitHwCfg, bool bWifiOff

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1124: FILE: ./hal/HalBtc8723b1Ant.c:1124:
    +	struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1310: FILE: ./hal/HalBtc8723b1Ant.c:1310:
    +	struct BTC_COEXIST * pBtCoexist, u8 byte1, u8 byte2, u8 byte3, u8 byte4, u8 byte5

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1364: FILE: ./hal/HalBtc8723b1Ant.c:1364:
    +	struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bTurnOn, u8 type

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1367: FILE: ./hal/HalBtc8723b1Ant.c:1367:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1664: FILE: ./hal/HalBtc8723b1Ant.c:1664:
    +static bool halbtc8723b1ant_IsCommonAction(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1755: FILE: ./hal/HalBtc8723b1Ant.c:1755:
    +	struct BTC_COEXIST * pBtCoexist, u8 wifiStatus

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1944: FILE: ./hal/HalBtc8723b1Ant.c:1944:
    +	struct BTC_COEXIST * pBtCoexist, bool bNewPsState

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1966: FILE: ./hal/HalBtc8723b1Ant.c:1966:
    +	struct BTC_COEXIST * pBtCoexist, u8 psType, u8 lpsVal, u8 rpwmVal

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2014: FILE: ./hal/HalBtc8723b1Ant.c:2014:
    +static void halbtc8723b1ant_ActionWifiMultiPort(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2022: FILE: ./hal/HalBtc8723b1Ant.c:2022:
    +static void halbtc8723b1ant_ActionHs(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2028: FILE: ./hal/HalBtc8723b1Ant.c:2028:
    +static void halbtc8723b1ant_ActionBtInquiry(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2030: FILE: ./hal/HalBtc8723b1Ant.c:2030:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2070: FILE: ./hal/HalBtc8723b1Ant.c:2070:
    +	struct BTC_COEXIST * pBtCoexist, u8 wifiStatus

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2073: FILE: ./hal/HalBtc8723b1Ant.c:2073:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2090: FILE: ./hal/HalBtc8723b1Ant.c:2090:
    +	struct BTC_COEXIST * pBtCoexist, u8 wifiStatus

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2095: FILE: ./hal/HalBtc8723b1Ant.c:2095:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2144: FILE: ./hal/HalBtc8723b1Ant.c:2144:
    +static void halbtc8723b1ant_ActionWifiNotConnected(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2155: FILE: ./hal/HalBtc8723b1Ant.c:2155:
    +	struct BTC_COEXIST * pBtCoexist

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2158: FILE: ./hal/HalBtc8723b1Ant.c:2158:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2189: FILE: ./hal/HalBtc8723b1Ant.c:2189:
    +	struct BTC_COEXIST * pBtCoexist

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2192: FILE: ./hal/HalBtc8723b1Ant.c:2192:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2213: FILE: ./hal/HalBtc8723b1Ant.c:2213:
    +static void halbtc8723b1ant_ActionWifiConnectedScan(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2215: FILE: ./hal/HalBtc8723b1Ant.c:2215:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2246: FILE: ./hal/HalBtc8723b1Ant.c:2246:
    +	struct BTC_COEXIST * pBtCoexist

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2249: FILE: ./hal/HalBtc8723b1Ant.c:2249:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2270: FILE: ./hal/HalBtc8723b1Ant.c:2270:
    +static void halbtc8723b1ant_ActionWifiConnected(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2390: FILE: ./hal/HalBtc8723b1Ant.c:2390:
    +static void halbtc8723b1ant_RunSwCoexistMechanism(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2449: FILE: ./hal/HalBtc8723b1Ant.c:2449:
    +static void halbtc8723b1ant_RunCoexistMechanism(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2451: FILE: ./hal/HalBtc8723b1Ant.c:2451:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2582: FILE: ./hal/HalBtc8723b1Ant.c:2582:
    +static void halbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2596: FILE: ./hal/HalBtc8723b1Ant.c:2596:
    +	struct BTC_COEXIST * pBtCoexist,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2651: FILE: ./hal/HalBtc8723b1Ant.c:2651:
    +void EXhalbtc8723b1ant_PowerOnSetting(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2653: FILE: ./hal/HalBtc8723b1Ant.c:2653:
    +	struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2703: FILE: ./hal/HalBtc8723b1Ant.c:2703:
    +void EXhalbtc8723b1ant_InitHwConfig(struct BTC_COEXIST * pBtCoexist, bool bWifiOnly)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2708: FILE: ./hal/HalBtc8723b1Ant.c:2708:
    +void EXhalbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2723: FILE: ./hal/HalBtc8723b1Ant.c:2723:
    +void EXhalbtc8723b1ant_DisplayCoexInfo(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2725: FILE: ./hal/HalBtc8723b1Ant.c:2725:
    +	struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2726: FILE: ./hal/HalBtc8723b1Ant.c:2726:
    +	struct BTC_STACK_INFO * pStackInfo = &pBtCoexist->stackInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #2727: FILE: ./hal/HalBtc8723b1Ant.c:2727:
    +	struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3186: FILE: ./hal/HalBtc8723b1Ant.c:3186:
    +void EXhalbtc8723b1ant_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3212: FILE: ./hal/HalBtc8723b1Ant.c:3212:
    +void EXhalbtc8723b1ant_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3230: FILE: ./hal/HalBtc8723b1Ant.c:3230:
    +void EXhalbtc8723b1ant_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3320: FILE: ./hal/HalBtc8723b1Ant.c:3320:
    +void EXhalbtc8723b1ant_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3377: FILE: ./hal/HalBtc8723b1Ant.c:3377:
    +void EXhalbtc8723b1ant_MediaStatusNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3447: FILE: ./hal/HalBtc8723b1Ant.c:3447:
    +void EXhalbtc8723b1ant_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3536: FILE: ./hal/HalBtc8723b1Ant.c:3536:
    +	struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3701: FILE: ./hal/HalBtc8723b1Ant.c:3701:
    +void EXhalbtc8723b1ant_HaltNotify(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3716: FILE: ./hal/HalBtc8723b1Ant.c:3716:
    +void EXhalbtc8723b1ant_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #3738: FILE: ./hal/HalBtc8723b1Ant.c:3738:
    +void EXhalbtc8723b1ant_Periodical(struct BTC_COEXIST * pBtCoexist)

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210315170618.2566-3-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nbdd0121 pushed a commit to nbdd0121/linux that referenced this pull request May 29, 2021
Update to a new nightly version
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 2, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 7, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 8, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 9, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
staging-kernelci-org pushed a commit to kernelci/linux that referenced this pull request Feb 11, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 14, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 15, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter pushed a commit to jonhunter/linux that referenced this pull request Feb 16, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Feb 24, 2022
WARNING: please, no spaces at the start of a line
torvalds#249: FILE: mm/page-writeback.c:2089:
+    {$

ERROR: code indent should use tabs where possible
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#250: FILE: mm/page-writeback.c:2090:
+        .procname   = "dirty_background_ratio",$

ERROR: code indent should use tabs where possible
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#251: FILE: mm/page-writeback.c:2091:
+        .data       = &dirty_background_ratio,$

ERROR: code indent should use tabs where possible
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#252: FILE: mm/page-writeback.c:2092:
+        .maxlen     = sizeof(dirty_background_ratio),$

ERROR: code indent should use tabs where possible
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#253: FILE: mm/page-writeback.c:2093:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#254: FILE: mm/page-writeback.c:2094:
+        .proc_handler   = dirty_background_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#255: FILE: mm/page-writeback.c:2095:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#256: FILE: mm/page-writeback.c:2096:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#257: FILE: mm/page-writeback.c:2097:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#258: FILE: mm/page-writeback.c:2098:
+    {$

ERROR: code indent should use tabs where possible
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#259: FILE: mm/page-writeback.c:2099:
+        .procname   = "dirty_background_bytes",$

ERROR: code indent should use tabs where possible
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#260: FILE: mm/page-writeback.c:2100:
+        .data       = &dirty_background_bytes,$

ERROR: code indent should use tabs where possible
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#261: FILE: mm/page-writeback.c:2101:
+        .maxlen     = sizeof(dirty_background_bytes),$

ERROR: code indent should use tabs where possible
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#262: FILE: mm/page-writeback.c:2102:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#263: FILE: mm/page-writeback.c:2103:
+        .proc_handler   = dirty_background_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#264: FILE: mm/page-writeback.c:2104:
+        .extra1     = SYSCTL_LONG_ONE,$

WARNING: please, no spaces at the start of a line
torvalds#265: FILE: mm/page-writeback.c:2105:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#266: FILE: mm/page-writeback.c:2106:
+    {$

ERROR: code indent should use tabs where possible
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

WARNING: please, no spaces at the start of a line
torvalds#267: FILE: mm/page-writeback.c:2107:
+        .procname   = "dirty_ratio",$

ERROR: code indent should use tabs where possible
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

WARNING: please, no spaces at the start of a line
torvalds#268: FILE: mm/page-writeback.c:2108:
+        .data       = &vm_dirty_ratio,$

ERROR: code indent should use tabs where possible
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

WARNING: please, no spaces at the start of a line
torvalds#269: FILE: mm/page-writeback.c:2109:
+        .maxlen     = sizeof(vm_dirty_ratio),$

ERROR: code indent should use tabs where possible
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#270: FILE: mm/page-writeback.c:2110:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

WARNING: please, no spaces at the start of a line
torvalds#271: FILE: mm/page-writeback.c:2111:
+        .proc_handler   = dirty_ratio_handler,$

ERROR: code indent should use tabs where possible
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#272: FILE: mm/page-writeback.c:2112:
+        .extra1     = SYSCTL_ZERO,$

ERROR: code indent should use tabs where possible
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#273: FILE: mm/page-writeback.c:2113:
+        .extra2     = SYSCTL_ONE_HUNDRED,$

WARNING: please, no spaces at the start of a line
torvalds#274: FILE: mm/page-writeback.c:2114:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#275: FILE: mm/page-writeback.c:2115:
+    {$

ERROR: code indent should use tabs where possible
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

WARNING: please, no spaces at the start of a line
torvalds#276: FILE: mm/page-writeback.c:2116:
+        .procname   = "dirty_bytes",$

ERROR: code indent should use tabs where possible
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

WARNING: please, no spaces at the start of a line
torvalds#277: FILE: mm/page-writeback.c:2117:
+        .data       = &vm_dirty_bytes,$

ERROR: code indent should use tabs where possible
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

WARNING: please, no spaces at the start of a line
torvalds#278: FILE: mm/page-writeback.c:2118:
+        .maxlen     = sizeof(vm_dirty_bytes),$

ERROR: code indent should use tabs where possible
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#279: FILE: mm/page-writeback.c:2119:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

WARNING: please, no spaces at the start of a line
torvalds#280: FILE: mm/page-writeback.c:2120:
+        .proc_handler   = dirty_bytes_handler,$

ERROR: code indent should use tabs where possible
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#281: FILE: mm/page-writeback.c:2121:
+        .extra1     = (void *)&dirty_bytes_min,$

WARNING: please, no spaces at the start of a line
torvalds#282: FILE: mm/page-writeback.c:2122:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#283: FILE: mm/page-writeback.c:2123:
+    {$

ERROR: code indent should use tabs where possible
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#284: FILE: mm/page-writeback.c:2124:
+        .procname   = "dirty_writeback_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

WARNING: please, no spaces at the start of a line
torvalds#285: FILE: mm/page-writeback.c:2125:
+        .data       = &dirty_writeback_interval,$

ERROR: code indent should use tabs where possible
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

WARNING: please, no spaces at the start of a line
torvalds#286: FILE: mm/page-writeback.c:2126:
+        .maxlen     = sizeof(dirty_writeback_interval),$

ERROR: code indent should use tabs where possible
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#287: FILE: mm/page-writeback.c:2127:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#288: FILE: mm/page-writeback.c:2128:
+        .proc_handler   = dirty_writeback_centisecs_handler,$

WARNING: please, no spaces at the start of a line
torvalds#289: FILE: mm/page-writeback.c:2129:
+    },$

WARNING: please, no spaces at the start of a line
torvalds#290: FILE: mm/page-writeback.c:2130:
+    {$

ERROR: code indent should use tabs where possible
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

WARNING: please, no spaces at the start of a line
torvalds#291: FILE: mm/page-writeback.c:2131:
+        .procname   = "dirty_expire_centisecs",$

ERROR: code indent should use tabs where possible
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

WARNING: please, no spaces at the start of a line
torvalds#292: FILE: mm/page-writeback.c:2132:
+        .data       = &dirty_expire_interval,$

ERROR: code indent should use tabs where possible
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

WARNING: please, no spaces at the start of a line
torvalds#293: FILE: mm/page-writeback.c:2133:
+        .maxlen     = sizeof(dirty_expire_interval),$

ERROR: code indent should use tabs where possible
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

WARNING: please, no spaces at the start of a line
torvalds#294: FILE: mm/page-writeback.c:2134:
+        .mode       = 0644,$

ERROR: code indent should use tabs where possible
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

WARNING: please, no spaces at the start of a line
torvalds#295: FILE: mm/page-writeback.c:2135:
+        .proc_handler   = proc_dointvec_minmax,$

ERROR: code indent should use tabs where possible
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#296: FILE: mm/page-writeback.c:2136:
+        .extra1     = SYSCTL_ZERO,$

WARNING: please, no spaces at the start of a line
torvalds#297: FILE: mm/page-writeback.c:2137:
+    },$

total: 37 errors, 49 warnings, 287 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

NOTE: Whitespace errors detected.
      You may wish to use scripts/cleanpatch or scripts/cleanfile

./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants