Program allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino, FT232H.

AVR cheat sheet for the ATmega328p

USBasp firmware working with a clone "USB ISP Version 2.0" (marked "MX-USBISP-Vx.00 on the PCB)

usbasp improved firmware

AsProgrammer dregmod allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports Buzzpirat, Bus Pirate, CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino & FT232H

USBasp - USB programmer for Atmel AVR controllers (with WinUSB support)

Notes for using the ATtiny10 with the open source AVR toolchain

An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.

An Object Pascal UART Terminal for USBasp UART firmwares.

Digispark ATtiny85 setup with command line interface. Simple LED blinking example to test frequency and timing.

A variant of the programmer USBAsp with the ability to program in parallel high-voltage mode.

USB programmer for Atmel AVR controllers (based on USBasp) with extra features

VusbPro is the enhanced V-USB, a software-based USB device using an AVR MCU

CLI interface for USBasp v2.0 DS18X20 temperature probe

Convert zhifengsoft (03eb:c8b4) USB ISP ASP AVR programmer to an USBasb programmer (USBasp from http://www.fischl.de/usbasp/).

This is the modified version of USBasp firmware with automatic clock (SCK) speed detection.

Testing temperature and humidity sensors DS18B20 and DHT11 (DHT22) with ATmega8 and tiny display monitor SSD1306. Non-blocking codes, custom soldered board.

USBasp v2.0 DS18X20 temperature probe

C/C++ language program for specified device (based on the Atmega328P microprocessor) that takes basic care of plants. [PL]

A Hardware to program any kind of AVR µController.