STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

A TS100 USB-PD replacement PCB.

easy USB-C power for all your devices

USB-PD soldering station for JBC C245 handles.

USB-C Power Delivery Firmware for STM32 microcontroller (ARM Cortex M0 & M4)

Autonomous USB-C PD controller for Power Sink applications (from Vbus=5V to 20V)

Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.

USB cable continuity tester ++

x-cube-usb-pd STM32 Expansion Package related to USB-IF Type-C Power Delivery protocol is no more recommended for new design. The USB power delivery PHY is now integrated in the new STM32 series. See below link.

Portable Programmable Power Supply

Example with ESP32 and FUSB302

Module for ONSEMI FUSB302-D (USB-C Controller) for PD negotiation using STM32 HAL

USB Power Delivery core stack library component for STM32

This repository is where you can download the firmware and PC GUI program of the MAXREFDES1260. It is a USB Type-C battery charging example using Maxim chips MAX14748 multi-cell battery charger and the MAX17261 fuel gauge.

USB Power Delivery device driver specific to STM32G0 for managing the Type-C physical layer

Dual Port USB Power Delivery „Charging Only“ Breakout Box Reference Design using Microchip dsPIC33CK DSC (Project-No 00173-Rev. 2.0, 05/02/2019)

USB Type-C Sink controller (5V only)

Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.

USB Type-C Connector System Software Interface (UCSI) for STM32

Charge your Phone off of your Bike while adapting charging power to available power / riding speed.