🫁 The world's first open-source ventilator tested on human patients. Mass-producible at a low cost (~2000€).

EMBO - Scope for only $6. Embedded instruments: Oscilloscope, Logic Analyzer, Voltmeter, Counter, PWM and Signal Generator on STM32 MCUs (F1, F3, L4, G4 ....). PC app for Windows, Ubuntu and macOS. Firmware is in C, PC GUI app is in C++ Qt 5.

grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)

Secure Patching Bootloader and Firmware Update System for STM32 MCUs

Temperature Logger via PAHO MQTT uses ESP8266 and STM32 Nucleo Board

Fast, safe and easy to use Cortex-M HAL Library, written in C++ 17

3D Printer controller board using STM32 NUCLEO-F446 kit TMC2130/2660/2209 drivers

Debugging tool for SPI devices, built for STM32 microcontrollers

Simple graphical ammeter based on INA219 current sensor, SSD1306 display and Nucleo-F070RB

GRBL ported on Cortex-M processors.

Tinkering with WizNet W5500 Ethernet Chip using an STM32F030R8 Nucleo Board

An example for EmbeddedProto on how to setup a project using makefiles.

Simple examples for STM32 LL, HAL and LibOpenCM3

STM32 OOP library

3D Printer controller based on STM32F411 Nucleo board

Rust boilerplate for the Nucleo-WL55JC2 development board.

3D engine for STM32 microcontrollers

A project to read temperature of a heatsink by thermocouples and 3D visualize them on the computer

This repository contains code for testing CAN bus communication on STM32 Nucleo-F446RE boards using MCP2515 and SN65HVD230 transceivers. It implements continuous multichannel ADC sampling via DMA, CAN message transmission between boards, and serial monitoring of CAN traffic and sensor data.