Non-blocking library for delaying function calls
-
Updated
Nov 8, 2023 - C++
Non-blocking library for delaying function calls
Non-blocking LED controlling library for Arduino and friends.
This library enables you to use Interrupt from Hardware Timers on an ESP32-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks…
Thread-safe cross-platform event loop library in C++
This library enables you to use Interrupt from Hardware Timers on an ESP8266-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tas…
This library enables you to use Hardware-based PWM channels on RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, with either Arduino-mbed (mbed_nano or mbed_rp2040) or arduino-pico core to create and output PWM any GPIO pin. The most important feature is they're purely hardware-based PWM channels, supporting very high PWM freq…
Simple transparent non-blocking TCP I/O for LuaJIT, Based on Boost.Asio and Lua coroutine.
Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.
This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nRF52, Teensy, etc. These Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other softw…
This library enables you to use Interrupt from Hardware Timers on an SAMD-based board. These SAMD Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you …
This library enables you to use Interrupt from Hardware Timers on an STM32F/L/H/G/WB/MP1-based board. These STM32F/L/H/G/WB/MP1 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micr…
hp_BH1750
This library enables you to use Interrupt from Hardware Timers on RP2040-based boards such as RASPBERRY_PI_PICO. These RPI_PICO_TimerInterrupt Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using m…
This library enables you to use 1 Hardware Timer on ESP32-based board to control 16 or more servo motors. Now supporting ESP32, ESP32_S2, ESP32_S3, ESP32_C3-based boards. Tested OK with ESP32 core v2.0.5
This library enables you to use RTC from RP2040-based boards such as Nano_RP2040_Connect, RASPBERRY_PI_PICO. This RP2040-based RTC, using Interrupt, has no battery backup. Time will be lost when powered down. To need NTP-client to update RTC every start-up.
This library enables you to use Interrupt from Hardware Timers on an nRF52-based board. These nRF52 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise than other software timers using millis() or micros(). Now supports `Sparkfun Pro nRF52840 Mini`
This library, a wrapper around ESP32 ledc library, enables you to use Hardware-based PWM channels on ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based boards to create and output PWM to pins. Using similar functions as some other FastPWM libraries, it enables you to port PWM code easily between platforms.
Arduino Library for ESP32 DS18B20 Non Blocking Onewire RMT protocol, no dependencies, minimal
Node++ is an asynchronous HTTP(S) engine and backend framework for low-latency C/C++ web applications / RESTful APIs.
A collection of software timers that allows one to properly time multiple events and know when each "timer" expires meaning that an action is required. The library aims at greatly simplifying multitask complexity.
Add a description, image, and links to the non-blocking topic page so that developers can more easily learn about it.
To associate your repository with the non-blocking topic, visit your repo's landing page and select "manage topics."