A simple example with how hybrid beamforming is employed at the transmit end of a massive MIMO communications system.

Analytical Models of the Performance of C-V2X Mode 4 Vehicular Communications

Analytical Models of the Performance of IEEE 802.11p Vehicle to Vehicle Communications

5G NB-IoT support NTN 非地面網路(衛星通訊)

MATLAB Imitation Modeling for the BER of the HF Communication System using M-PSK Modulation in the HF Communication Channel with Multipath and Signal Fading that constructed according to ITU-R Recommendation F.1487

This example shows how to co-execute MATLAB and Python to simulate the effect of channel estimate compression on precoding in a MIMO OFDM channel.

Assignments and material for the course Advanced Topics in Communications taught by Prof. Radhakrishna Ganti at IIT Madras.

Project aims to simulate multiplexing three signals on two carriers with two different frequencies where two of these signals are modulated using quadrature amplitude modulation, then the three signals are restored using synchronous carrier demodulation.

🎯 Repositório para Disciplina EEL7522 - Processamento Digital de Sinais - UFSC

Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting messages with a radio carrier wave. In amplitude modulation, the amplitude (signal strength) of the carrier wave is varied in proportion to that of the message signal, such as an audio signal.

Implementation of an FM system using matlab code.

🔊🎵Analog Communication Project to apply amplitude modulation and demodulation for three different audio signals.

homework of communications and networks of EE, Tsinghua University

Some Codes and outputs from Signal and Systems

Proyectos 2 y 3 de Comunicaciones digitales avanzadas

Implementing a full-fledged communication system for QPSK Modulation in MATLAB

ELC3050: a calculator for rectangular cavity resonator quality factor using matlab + dipole antenna project

This repository maintains code written in Matlab to generate a MSK waveform from text converted to bits, transmit and receive waveform over audio, and demodulate the waveform. The demodulated waveform is represented in bits that are then turned back into text.

Demodulación FM utilizando el software Octave.

Written in MATLAB, this project is a digital pedal compressor that filters certain ranges of frequencies. Applicable in signals and communications industry and music industry for producers or artists to fine tune their music.