NOS Starter Kit

Code sample to give the first steps in NB IoT world using NOS NB IoT KIT.

Hardware

• Processor: STElectronics STM32L073RZ
• Modem: Quectel BC68

Guide

https://www.thinkdigital.pt/downloads/NOS_Starter_Kit_CE.pdf

Example

The main.cpp file shows an example of how to connect to NB-IoT network.

Note: this code was built using SystemWorkbench from AC6 and probably wouldn't be compatible with other IDEs, meaning that HAL functions have to be changed

Step 1

• Use STM32CubeMX to generate your HAL libraries according to the available board peripherals;
• Check images to check uController pinout configuration;
• Check hardware to compare to your configuration;
• Configure USART clocks and gpios modes.

Note: don't forget to enable interrupts during USART configurations - the example uses interrupts for USART communication

Step 2

• Export your project to your preferred IDE;
• In order to use the libraries in this project, you have to convert your project to cpp and rename your main.c to main.cpp.

Step 3

• Copy only the files into the project that don't exist there or sync with git. If you're syncing with git, create your own .gitignore file;
• Compile your code and flash into your starter kit;
• Have fun 😄