Add Icelake support in SOF #30
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
plbossart
reviewed
Jul 12, 2018
|
Yes, it is the first time I get this issue. I just know this type of limitation in PCI device yesterday |
The original function makes a mistake. It changes the value of dest data to zero but these data are out of write range Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Icelake shares the setting of cannonlake because no difference between them in host Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
|
update my patch, only the first and last patches are reserved For second patch, I will fix the issue in another way. I will refine IPC data structure to make sure its size is 4 bytes aligned Thanks for review |
plbossart
approved these changes
Jul 20, 2018
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Sep 14, 2018
[ Upstream commit 6d37fa4 ] In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a UDP socket. User could call sendmsg() on both this tunnel and the UDP socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call __sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there could be a race and cause the dst cache to be freed multiple times. So we fix l2tp side code to always call sk_dst_check() to garantee xchg() is called when refreshing sk->sk_dst_cache to avoid race conditions. Syzkaller reported stack trace: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline] BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline] BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline] BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829 CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ thesofproject#30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] atomic_fetch_add_unless include/linux/atomic.h:575 [inline] atomic_add_unless include/linux/atomic.h:597 [inline] dst_hold_safe include/net/dst.h:308 [inline] ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline] ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210 __do_sys_sendmmsg net/socket.c:2239 [inline] __se_sys_sendmmsg net/socket.c:2236 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446a29 Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001 Fixes: 71b1391 ("l2tp: ensure sk->dst is still valid") Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: David Ahern <dsahern@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
plbossart
pushed a commit
that referenced
this pull request
Apr 11, 2019
This reverts commit b189e75. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Fixes: b189e75 ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
fredoh9
pushed a commit
to fredoh9/linux
that referenced
this pull request
Jun 1, 2019
BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs] Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603 CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ thesofproject#30 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ip_vs_in.part.29+0xe8/0xd20 [ip_vs] ip_vs_in+0xd8/0x170 [ip_vs] nf_hook_slow+0x5f/0xe0 __ip_local_out+0x1d5/0x250 ip_local_out+0x19/0x60 __tcp_transmit_skb+0xba1/0x14f0 tcp_write_xmit+0x41f/0x1ed0 ? _copy_from_iter_full+0xca/0x340 __tcp_push_pending_frames+0x52/0x140 tcp_sendmsg_locked+0x787/0x1600 ? tcp_sendpage+0x60/0x60 ? inet_sk_set_state+0xb0/0xb0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x6d/0x80 sock_write_iter+0x121/0x1c0 ? sock_sendmsg+0x80/0x80 __vfs_write+0x23e/0x370 vfs_write+0xe7/0x230 ksys_write+0xa1/0x120 ? __ia32_sys_read+0x50/0x50 ? __audit_syscall_exit+0x3ce/0x450 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff6f6147c60 Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60 RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003 RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74 R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0 Allocated by task 6052: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x10a/0x220 ops_init+0x97/0x190 register_pernet_operations+0x1ac/0x360 register_pernet_subsys+0x24/0x40 0xffffffffc0ea016d do_one_initcall+0x8b/0x253 do_init_module+0xe3/0x335 load_module+0x2fc0/0x3890 __do_sys_finit_module+0x192/0x1c0 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6067: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 ops_free_list.part.7+0xa6/0xc0 unregister_pernet_operations+0x18b/0x1f0 unregister_pernet_subsys+0x1d/0x30 ip_vs_cleanup+0x1d/0xd2f [ip_vs] __x64_sys_delete_module+0x20c/0x300 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600) The buggy address belongs to the page: page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected while unregistering ipvs module, ops_free_list calls __ip_vs_cleanup, then nf_unregister_net_hooks be called to do remove nf hook entries. It need a RCU period to finish, however net->ipvs is set to NULL immediately, which will trigger NULL pointer dereference when a packet is hooked and handled by ip_vs_in where net->ipvs is dereferenced. Another scene is ops_free_list call ops_free to free the net_generic directly while __ip_vs_cleanup finished, then calling ip_vs_in will triggers use-after-free. This patch moves nf_unregister_net_hooks from __ip_vs_cleanup() to __ip_vs_dev_cleanup(), where rcu_barrier() is called by unregister_pernet_device -> unregister_pernet_operations, that will do the needed grace period. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efe4160 ("ipvs: convert to use pernet nf_hook api") Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
bardliao
pushed a commit
that referenced
this pull request
Jun 11, 2019
BugLink: https://bugs.launchpad.net/bugs/1822671 commit 2b77158 upstream. This reverts commit b189e75. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Fixes: b189e75 ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Jul 9, 2019
[ Upstream commit 719c7d5 ] BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs] Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603 CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ thesofproject#30 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ip_vs_in.part.29+0xe8/0xd20 [ip_vs] ip_vs_in+0xd8/0x170 [ip_vs] nf_hook_slow+0x5f/0xe0 __ip_local_out+0x1d5/0x250 ip_local_out+0x19/0x60 __tcp_transmit_skb+0xba1/0x14f0 tcp_write_xmit+0x41f/0x1ed0 ? _copy_from_iter_full+0xca/0x340 __tcp_push_pending_frames+0x52/0x140 tcp_sendmsg_locked+0x787/0x1600 ? tcp_sendpage+0x60/0x60 ? inet_sk_set_state+0xb0/0xb0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x6d/0x80 sock_write_iter+0x121/0x1c0 ? sock_sendmsg+0x80/0x80 __vfs_write+0x23e/0x370 vfs_write+0xe7/0x230 ksys_write+0xa1/0x120 ? __ia32_sys_read+0x50/0x50 ? __audit_syscall_exit+0x3ce/0x450 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff6f6147c60 Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60 RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003 RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74 R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0 Allocated by task 6052: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x10a/0x220 ops_init+0x97/0x190 register_pernet_operations+0x1ac/0x360 register_pernet_subsys+0x24/0x40 0xffffffffc0ea016d do_one_initcall+0x8b/0x253 do_init_module+0xe3/0x335 load_module+0x2fc0/0x3890 __do_sys_finit_module+0x192/0x1c0 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6067: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 ops_free_list.part.7+0xa6/0xc0 unregister_pernet_operations+0x18b/0x1f0 unregister_pernet_subsys+0x1d/0x30 ip_vs_cleanup+0x1d/0xd2f [ip_vs] __x64_sys_delete_module+0x20c/0x300 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600) The buggy address belongs to the page: page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected while unregistering ipvs module, ops_free_list calls __ip_vs_cleanup, then nf_unregister_net_hooks be called to do remove nf hook entries. It need a RCU period to finish, however net->ipvs is set to NULL immediately, which will trigger NULL pointer dereference when a packet is hooked and handled by ip_vs_in where net->ipvs is dereferenced. Another scene is ops_free_list call ops_free to free the net_generic directly while __ip_vs_cleanup finished, then calling ip_vs_in will triggers use-after-free. This patch moves nf_unregister_net_hooks from __ip_vs_cleanup() to __ip_vs_dev_cleanup(), where rcu_barrier() is called by unregister_pernet_device -> unregister_pernet_operations, that will do the needed grace period. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efe4160 ("ipvs: convert to use pernet nf_hook api") Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dragosht
pushed a commit
to dragosht/linux-sof
that referenced
this pull request
Oct 10, 2019
…robe Steven reported that a test triggered: ================================================================== BUG: KASAN: slab-out-of-bounds in trace_kprobe_create+0xa9e/0xe40 Read of size 8 at addr ffff8880c4f25a48 by task ftracetest/4798 CPU: 2 PID: 4798 Comm: ftracetest Not tainted 5.3.0-rc6-test+ thesofproject#30 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x7c/0xc0 ? trace_kprobe_create+0xa9e/0xe40 print_address_description+0x6c/0x332 ? trace_kprobe_create+0xa9e/0xe40 ? trace_kprobe_create+0xa9e/0xe40 __kasan_report.cold.6+0x1a/0x3b ? trace_kprobe_create+0xa9e/0xe40 kasan_report+0xe/0x12 trace_kprobe_create+0xa9e/0xe40 ? print_kprobe_event+0x280/0x280 ? match_held_lock+0x1b/0x240 ? find_held_lock+0xac/0xd0 ? fs_reclaim_release.part.112+0x5/0x20 ? lock_downgrade+0x350/0x350 ? kasan_unpoison_shadow+0x30/0x40 ? __kasan_kmalloc.constprop.6+0xc1/0xd0 ? trace_kprobe_create+0xe40/0xe40 ? trace_kprobe_create+0xe40/0xe40 create_or_delete_trace_kprobe+0x2e/0x60 trace_run_command+0xc3/0xe0 ? trace_panic_handler+0x20/0x20 ? kasan_unpoison_shadow+0x30/0x40 trace_parse_run_command+0xdc/0x163 vfs_write+0xe1/0x240 ksys_write+0xba/0x150 ? __ia32_sys_read+0x50/0x50 ? tracer_hardirqs_on+0x61/0x180 ? trace_hardirqs_off_caller+0x43/0x110 ? mark_held_locks+0x29/0xa0 ? do_syscall_64+0x14/0x260 do_syscall_64+0x68/0x260 Fix to check the difference of nr_args before adding probe on existing probes. This also may set the error log index bigger than the number of command parameters. In that case it sets the error position is next to the last parameter. Link: http://lkml.kernel.org/r/156966474783.3478.13217501608215769150.stgit@devnote2 Fixes: ca89bc0 ("tracing/kprobe: Add multi-probe per event support") Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
plbossart
pushed a commit
that referenced
this pull request
Oct 25, 2019
In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 59c84b9 ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bardliao
pushed a commit
to bardliao/linux
that referenced
this pull request
Jul 1, 2020
When working with very large nodes, poisoning the struct pages (for which there will be very many) can take a very long time. If the system is using voluntary preemptions, the software watchdog will not be able to detect forward progress. This patch addresses this issue by offering to give up time like __remove_pages() does. This behavior was introduced in v5.6 with: commit d33695b ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Alternately, init_page_poison could do this cond_resched(), but it seems to me that the caller of init_page_poison() is what actually knows whether or not it should relax its own priority. Based on Dan's notes, I think this is perfectly safe: commit f931ab4 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Aside from fixing the lockup, it is also a friendlier thing to do on lower core systems that might wipe out large chunks of hotplug memory (probably not a very common case). Fixes this kind of splat: watchdog: BUG: soft lockup - CPU#46 stuck for 22s! [daxctl:9922] irq event stamp: 138450 hardirqs last enabled at (138449): [<ffffffffa1001f26>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (138450): [<ffffffffa1001f42>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (138448): [<ffffffffa1e00347>] __do_softirq+0x347/0x456 softirqs last disabled at (138443): [<ffffffffa10c416d>] irq_exit+0x7d/0xb0 CPU: 46 PID: 9922 Comm: daxctl Not tainted 5.7.0-BEN-14238-g373c6049b336 thesofproject#30 Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0578.D07.1902280810 02/28/2019 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 Call Trace: remove_pfn_range_from_zone+0x3a/0x380 memunmap_pages+0x17f/0x280 release_nodes+0x22a/0x260 __device_release_driver+0x172/0x220 device_driver_detach+0x3e/0xa0 unbind_store+0x113/0x130 kernfs_fop_write+0xdc/0x1c0 vfs_write+0xde/0x1d0 ksys_write+0x58/0xd0 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Built 2 zonelists, mobility grouping on. Total pages: 49050381 Policy zone: Normal Built 3 zonelists, mobility grouping on. Total pages: 49312525 Policy zone: Normal David said: "It really only is an issue for devmem. Ordinary hotplugged system memory is not affected (onlined/offlined in memory block granularity)." Link: http://lkml.kernel.org/r/20200619231213.1160351-1-ben.widawsky@intel.com Fixes: commit d33695b ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: "Scargall, Steve" <steve.scargall@intel.com> Reported-by: Ben Widawsky <ben.widawsky@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Oct 26, 2020
[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b thesofproject#30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b thesofproject#30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cujomalainey
pushed a commit
to cujomalainey/linux
that referenced
this pull request
Oct 26, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 thesofproject#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 thesofproject#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 thesofproject#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 thesofproject#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 thesofproject#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 thesofproject#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 thesofproject#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 thesofproject#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 thesofproject#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 thesofproject#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 thesofproject#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 thesofproject#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 thesofproject#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 thesofproject#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
aiChaoSONG
pushed a commit
to aiChaoSONG/linux
that referenced
this pull request
May 6, 2021
Add README.md (GitHub only)
bardliao
pushed a commit
to bardliao/linux
that referenced
this pull request
Oct 27, 2021
During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 thesofproject#30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 thesofproject#30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
kuanhsuncheng
pushed a commit
to kuanhsuncheng/linux
that referenced
this pull request
Jan 10, 2022
To pick the changes in this cset: db8268d ("x86/arch_prctl: Add controls for dynamic XSTATE components") This picks these new prctls: $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2021-11-13 10:42:52.787308809 -0300 +++ /tmp/after 2021-11-13 10:43:02.295558837 -0300 @@ -6,6 +6,9 @@ [0x1004 - 0x1001]= "GET_GS", [0x1011 - 0x1001]= "GET_CPUID", [0x1012 - 0x1001]= "SET_CPUID", + [0x1021 - 0x1001]= "GET_XCOMP_SUPP", + [0x1022 - 0x1001]= "GET_XCOMP_PERM", + [0x1023 - 0x1001]= "REQ_XCOMP_PERM", }; #define x86_arch_prctl_codes_2_offset 0x2001 $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns thesofproject#30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns thesofproject#30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB thesofproject#556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB thesofproject#556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tinghan-shen
pushed a commit
to tinghan-shen/linux
that referenced
this pull request
Mar 11, 2022
To pick the changes in this cset: 980fe2f ("x86/fpu: Extend fpu_xstate_prctl() with guest permissions") This picks these new prctls: $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2022-01-19 14:40:05.049394977 -0300 +++ /tmp/after 2022-01-19 14:40:35.628154565 -0300 @@ -9,6 +9,8 @@ [0x1021 - 0x1001]= "GET_XCOMP_SUPP", [0x1022 - 0x1001]= "GET_XCOMP_PERM", [0x1023 - 0x1001]= "REQ_XCOMP_PERM", + [0x1024 - 0x1001]= "GET_XCOMP_GUEST_PERM", + [0x1025 - 0x1001]= "REQ_XCOMP_GUEST_PERM", }; #define x86_arch_prctl_codes_2_offset 0x2001 $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns thesofproject#30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns thesofproject#30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB thesofproject#556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB thesofproject#556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ujfalusi
pushed a commit
to ujfalusi/sof-linux
that referenced
this pull request
Mar 17, 2023
…vmsg_parser() When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ thesofproject#30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d86 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230303080946.1146638-1-liujian56@huawei.com
plbossart
pushed a commit
that referenced
this pull request
May 26, 2023
To pick the changes in this cset: a03c376 ("x86/arch_prctl: Add AMX feature numbers as ABI constants") 23e5d9e ("x86/mm/iommu/sva: Make LAM and SVA mutually exclusive") 2f8794b ("x86/mm: Provide arch_prctl() interface for LAM") This picks these new prctls in a third range, that was also added to the tools/perf/trace/beauty/arch_prctl.c beautifier. $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after @@ -20,3 +20,11 @@ [0x2003 - 0x2001]= "MAP_VDSO_64", }; +#define x86_arch_prctl_codes_3_offset 0x4001 +static const char *x86_arch_prctl_codes_3[] = { + [0x4001 - 0x4001]= "GET_UNTAG_MASK", + [0x4002 - 0x4001]= "ENABLE_TAGGED_ADDR", + [0x4003 - 0x4001]= "GET_MAX_TAG_BITS", + [0x4004 - 0x4001]= "FORCE_TAGGED_SVA", +}; + $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/ZGTjNPpD3FOWfetM@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bardliao
pushed a commit
to bardliao/linux
that referenced
this pull request
Sep 10, 2024
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ thesofproject#30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: stable@vger.kernel.org Fixes: 2541626 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240815201923.632803-1-airlied@gmail.com
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Add corresponding data structure and refine block read & write function to make it work on Icelake.
Test the patch on APL, CNL and ICL, pass