For typeset documentation, examples of use, and design philosophy please go to my blog.
v1.0 has been released, but if you need to refer to a later revision
from the stable master branch, please use v1.0.yyyymmdd where
yyyy-mm-dd is the date of the commit used. This is important for
method details in scientific papers, and for software packaging
(e.g. Conda, HomeBrew, or Linux distribution packages).
The commands below permit one to find all significant local alignments between reads encoded in Dazzler database. The assumption is that the reads are from a PACBIO RS II long read sequencer. That is the reads are long and noisy, up to 15% on average.
Recall that a database has a current partition that divides it into blocks of a size that can conveniently be handled by calling the daligner overlapper on all the pairs of blocks producing a collection of .las local alignment files that can then be sorted and merged into an ordered sequence of sorted files containing all alignments between reads in the data set. The alignment records are parsimonious in that they do not record an alignment but simply a set of trace points, typically every 100bp or so, that allow the efficient reconstruction of alignments on demand.
All programs add suffixes (e.g. .db, .las) as needed. For the commands that take multiple .db or .las file blocks as arguments, i.e. daligner, LAsort, LAmerge, LAcat, and LAcheck, one can place a @-sign in the name, which is then interpreted as the sequence of files obtained by replacing the @-sign by 1, 2, 3, ... in sequence until a number is reached for which no file matches. One can also place a @-sign followed by an integer, say, i, in which case the sequence starts at i. Lastly, one can also use @i-j where i and j are integers, in which case the sequence is from i to j, inclusive.
The formal UNIX command line descriptions and options for the DALIGNER module commands are as follows:
1. daligner [-vaAI]
[-k<int(16)>] [-%<int(28)>] [-h<int(50)>] [-w<int(6)>] [-t<int>] [-M<int>]
[-e<double(.75)] [-l<int(1500)] [-s<int(100)>] [-H<int>]
[-T<int(4)>] [-P<dir(/tmp)>] [-m<track>]+
<subject:db|dam> <target:db|dam> ...
Compare sequences in the trimmed <subject> block against those in the list of <target> blocks searching for local alignments involving at least -l base pairs (default 1000) or more, that have an average correlation rate of -e (default 70%). The local alignments found will be output in a sparse encoding where a trace point on the alignment is recorded every -s base pairs of the a-read (default 100bp). Reads are compared in both orientations and local alignments meeting the criteria are output to one of several created files described below. The -v option turns on a verbose reporting mode that gives statistics on each major step of the computation. The program runs with 4 threads by default, but this may be set to any positive value with the -T option.
The options -k, -%, -h, and -w control the initial filtration search for possible matches between reads. Specifically, our search code looks for a pair of diagonal bands of width 2w (default 26 = 64) that contain a collection of matching k-mers (default 16) in the lowest %-percentifle between the two reads, such that the total number of bases covered by the k-mer hits is h (default 50). k cannot be larger than 32 in the current implementation. These parameters will shortly be superceded with a more intuitive interface.
If there are one or more interval tracks specified with the -m option, then the reads of the DB or DB's to which the mask applies are soft masked with the union of the intervals of all the interval tracks that apply, that is any k-mers that contain any bases in any of the masked intervals are ignored for the purposes of seeding a match. An interval track is a track, such as the "dust" track created by DBdust, that encodes a set of intervals over either the untrimmed or trimmed DB.
Invariably, some k-mers are significantly over-represented (e.g. homopolymer runs). These k-mers create an excessive number of matching k-mer pairs and left unaddressed would cause daligner to overflow the available physical memory. One way to deal with this is to explicitly set the -t parameter which suppresses the use of any k-mer that occurs more than t times in either the subject or target block. However, a better way to handle the situation is to let the program automatically select a value of t that meets a given memory usage limit specified (in Gb) by the -M parameter. By default daligner will use the amount of physical memory as the choice for -M. If you want to use less, say only 8Gb on a 24Gb HPC cluster node because you want to run 3 daligner jobs on the node, then specify -M8. Specifying -M0 basically indicates that you do not want daligner to self adjust k-mer suppression to fit within a given amount of memory.
Each found alignment is recorded as -- a[ab,ae] x bo[bb,be] -- where a and b are the
indices (in the trimmed DB) of the reads that overlap, o indicates whether the b-read
is from the same or opposite strand, and [ab,ae] and [bb,be] are the intervals of a
and bo, respectively, that align. For each subject, target pair of blocks, say X and Y,
the program reports alignments where the a-read is in X and the b-read is in Y, or
vice versa. However, if the -A option is set ("A" for "asymmetric") then just overlaps
where the a-read is in X and the b-read is in Y are reported, and if X = Y then it
further reports only those overlaps where the a-read index is less than the b-read index.
In either case, if the -I option is set ("I" for "identity") then when X = Y, overlaps
between different portions of the same read will also be found and reported. In summary,
the command daligner -A X Y produces a single file X.Y.las and daligner X Y produces
2 files X.Y.las and Y.X.las (unless X=Y in which case only a single file, X.X.las, is
produced). The overlap records in one of these files are sorted as described for LAsort.
The -a option to daligner is passed directly through to LAsort which is actually called
as a sub-process to produce the sorted file.
In order to produce the aforementioned .las file, several temporary .las files, two for
each thread, are produce in the sub-directory /tmp by default. You can overide this
location by specifying the directory you would like this activity to take place in with
the -P option.
By default daligner compares all overlaps between reads in the database that are greater than the minimum cutoff set when the DB or DBs were split, typically 1 or 2 Kbp. However, the HGAP assembly pipeline only wants to correct large reads, say 8Kbp or over, and so needs only the overlaps where the a-read is one of the large reads. By setting the -H parameter to say N, one alters daligner so that it only reports overlaps where the a-read is over N base-pairs long.
While the default parameter settings are good for raw Pacbio data, daligner can be used
for efficiently finding alignments in corrected reads or other less noisy reads. For
example, for mapping applications against .dams we run daligner -k20 -h60 -e.85 and
on corrected reads, we typically run daligner -k25 -w5 -h60 -e.95 -s500 and at
these settings it is very fast.
2. LAsort [-va] <align:las> ...
Sort each .las alignment file specified on the command line. For each file it reads in all the overlaps in the file and sorts them in lexicographical order of (a,b,o,ab) assuming each alignment is recorded as a[ab,ae] x bo[bb,be]. It then writes them all to a file named <align>.S.las (assuming that the input file was <align>.las). With the -v option set then the program reports the number of records read and written. If the -a option is set then it sorts LAs in lexicographical order of (a,ab) alone, which is desired when sorting a mapping of reads to a reference.
If the .las file was produced by damapper the local alignments are organized into chains where the LA segments of a chain are consecutive and ordered in the file. LAsort can detects that it has been passed such a file and if so treats the chains as a unit and sorts them on the basis of the first LA in the chain.
3. LAmerge [-va] [-P<dir(/tmp)>] <merge:las> <parts:las> ...
Merge the .las files <parts> into a singled sorted file <merge>, where it is assumed that the input <parts> files are sorted. There are no limits to how many files can be merged, but if there are more than 252, a typical UNIX OS limit on the number of simultaneously open files, then the program recursively spawns sub-processes and creates temporary files in the directory specified by the -P option, /tmp by default. With the -v option set the program reports the number of records read and written. The -a option indicates the sort is as describe for LAsort above.
If the .las file was produced by damapper the local alignments are organized into chains where the LA segments of a chain are consecutive and ordered in the file. When merging such files, LAmerge treats the chains as a unit and orders them on the basis of the first LA in the chain.
Used correctly, LAmerge and LAsort together allow one to perform an "external" sort that produces a collection of sorted files containing in aggregate all the local alignments found by the daligner, such that their concatenation is sorted in order of (a,b,o,ab) (or (a,ab) if the -a option is set). In particular, this means that all the alignments for a given a-read will be found consecutively in one of the files. So computations that need to look at all the alignments for a given read can operate in simple sequential scans of these sorted files.
4. LAshow [-caroUF] [-i<int(4)>] [-w<int(100)>] [-b<int(10)>]
<src1:db|dam> [ <src2:db|dam> ]
<align:las> [ <reads:FILE> | <reads:range> ... ]
LAshow produces a printed listing of the local alignments contained in the specified .las file, where the a- and b-reads come from src1 or from src1 and scr2, respectively. If a file or list of read ranges is given then only the overlaps for which the a-read is in the set specified by the file or list are displayed. See DBshow for an explanation of how the file and list of read ranges are interpreted. If the -F option is set then the roles of the a- and b- reads are reversed in the display.
If the -c option is given then a cartoon rendering is displayed, and if -a or -r option is set then an alignment of the local alignment is displayed. The -a option puts exactly -w columns per segment of the display, whereas the -r option puts exactly -w a-read symbols in each segment of the display. The -r display mode is useful when one wants to visually compare two alignments involving the same a-read. If a combination of the -c, -a, and -r flags is set, then the cartoon comes first, then the -a alignment, and lastly the -r alignment. The -i option sets the indent for the cartoon and/or alignment displays, if they are requested. The -b option sets the number of symbols on either side of the aligned segments in an alignment display, and -U specifies that uppercase should be used for DNA sequence instead of the default lowercase. If the -o option is set then only alignments that are proper overlaps (a sequence end occurs at the each end of the alignment) are displayed. If the -F option is given then the roles of the A- and B-reads are flipped.
When examining LAshow output it is important to keep in mind that the coordinates describing an interval of a read are referring conceptually to positions between bases starting at 0 for the position to the left of the first base. That is, a coordinate c refers to the position between the c-1'st and c'th base, and the interval [b,e] captures the e-b bases from the b'th to the e-1'st, inclusive. We give an example with a cartoon and (part of an) alignment for which we will explain several additional important points:
1 1,865 c [18,479..20,216] x [ 1,707..0> (24,451 x 7,283 bps, 19 trace pts)
18479 4235
A ========+----------+======> dif/(len1+len2) = 478/(1737+1707) = 27.76%
B <======+-----------
5576
18469 agccgcctag[tgcctcgcaaacgc-t-cggggcggcgt-gaaagcgg--
::::::::::[||||||||||||||*|*|||*|||*|||*||||||||**
1717 ctcttcttta[tgcctcgcaaacgccttcggcgcg-cgttgaaagcggtt 17.9%
18513 -ccggtgggtc--agtggcgagttctggcagtgcgctggg-ctgcgaaat
*||||||*|||**|||||*||||*|*|*|||**|||||||*||*||||||
1669 gccggtgcgtcgcagtgg-gagt-c-gtcag--cgctggggcttcgaaat 24.0%
. . .
The display of an LA always begins with a line giving the A-read, then the B-read, then an indication of orientation (i.e. 'n' for same strand, and 'c' for the opposite strand) followed by the A-interval and B-interval that are aligned and in parentheses the lengths of the two reads and the number of tracepoints in the alignment between them. In particular, note carefully that when the B-read is in the complement orientation (c), then the B-interval gives the higher coordinate first, the idea being that one will align from the highest base down to the lowest base in the descending direction on B, complement the characters as you go. Further note that in the alignment display the coordinates at the start of each line follow this orientation convention and give the coordinate of the "tick mark" just left of the first character in each line. It is useful to know if an interval reaches the end of read, and to signal this we use an angle-bracket <> instead of a square bracket [], e.g. in the example the B-segment starts at the beginning of the read. Finally, observe that in the cartoon the numbers are not coordinates but rather indicate the lengths of the unaligned bits left and right of the two aligned intervals. Finally, observe that in the cartoon the numbers are not coordinates but rather indicate the lengths of the unaligned bits left and right of the two aligned intervals.
With the introduction of damapper, .las files can now contain chains. If LAshow detects that it has been passed a file with chain information then it displays marks at the left that reveal the chain structure, e.g.:
> 117 37,630 c [ 253.. 7,980] x [ 331,430.. 324,027] ~ 10.5%
+ 117 37,628 n [ 253.. 7,983] x [21,493,673..21,501,079] ~ 10.6%
+ 117 57 c [ 253.. 1,086] x [ 2,008,164.. 2,007,369] ~ 9.8%
- 117 57 c [ 1,300.. 7,982] x [ 2,007,351.. 2,000,945] ~ 10.7%
> 117 15 c [ 7,992.. 8,716] x [ 242,529.. 241,822] ~ 7.8%
- 117 15 c [ 8,752..14,299] x [ 241,824.. 236,425] ~ 10.7%
- 117 15 c [14,133..14,832] x [ 236,630.. 235,953] ~ 12.1%
+ 117 37,628 n [ 7,992.. 8,716] x [19,202,357..19,203,064] ~ 7.7%
- 117 37,628 n [ 8,752..14,832] x [19,203,062..19,208,974] ~ 10.9%
A chain begins with either a > or + character, where > indicates this is the highest scoring chain and + indicates an alternate near optimal chain (controlled by the -n parameter to damapper). Each additional LA of a chain is marked with a - character.
5a. LA2ONE [-cto] <src1:db|dam> [ <src2:db|dam> ]
<align:las> [ <reads:FILE> | <reads:range> ... ] > (.dal file)
5b. ONE2LA <align.dal> > (.las file)
LA2ONE produces a .dal 1-code data file of all or a portion of the contents of a .las file. 1-code is a powerful self-describing, simple to use, data system with built in compression. Typically a .dal file will be 45% the size of its corresponding .dal file. By default only the pairwise overlapped pairs, their orientation, and chaining (if any) are output. The -c option requests that one further output the coordinates of the LA segments, the lengths of the reads and the # of differences in each LA. The -t option requests that the trace point alignment details are output for each LA. If -t is set then -c must be set and if both are set then all of the information about each LA is effectively output. The -o option requests that only LAs that are proper overlaps be output. Only the overlaps for particular A-reads may be specified as per the same command line arguments as documented for LAshow above.
ONE2LA converts a 1-code .dal file back into a .las file. It requires that the .dal file contains all the information about each LA therein, that is, it must contain all the information that is output by LA2ONE with the options -ct set.
The .dal format is quite simple where the primary object is considered to be a pile, i.e., the set of all LAs for a given a-read. The encoding of all the LAs for a pile is given by several lines in the 1-code format, where each line type is designated by the first character in the line. The P-line designated the start of a pile object and consists of giving the a-read and then a list of all the b-reads in the pile. We term the length of this list the size of the pile. All other line type lists for this given pile should have the same size or a multiple thereof. By default the P-line is followed by O- and C-lines that give the orientation and chaining directives (if any) for each b-read in the pile list as strings, one character per b-read.
P <a-read: int> <pile b-reads: int_list>
O <orientations: string over [nc]> // n is normal, c is complement
C <chain directives: string over [>+-.]> // '>' start of best chain,
// '+' start of alternate chain,
// '-' continuation of chain, or
// '.' no chains (in the file).
If the -c flag is set, then LA2ONE also outputs 1-code lines describing the intervals (ab,ae) of the a-read that align with intervals (bb,be) of the b-reads and the diffs in the aligned segments. The lengths of the a-read and all the b-reads is also output for convenience. The A-line outputs a list of the pairs (ab,ae) in the same order as the b-reads are listed in the object P-line. The B-line outputs a list of the pairs (bb,be) and the D-line outputs a list of the corresponding difference in each aligned pair of segments. Note carefully that the length of the A-line and B-line lists are twice that of the pile size. Lastly, the L-line gives the length of the a-read and then the lengths of the b-reads in the same order as the P-line.
A <a-read intervals: int_list>
B <b-read intervals: int_list>
D <alignment diffs: int_list>
L <a-read length: int> <b-read lengths: int_list>
If the -t flag is set, then LA2ONE outputs a pair of T- and Q-lines, one for each alignment in the pile in the order listed in the controlling P-line. The relative order of the T- and Q-lines does not matter as long as the i'th occurrence of a T- or Q-line is for the i'th alignment in the pile. The T-line gives the b-segment lengths for a trace-point encoding of the alignment and the Q-line gives the difference in each segment. In addition the a-read spacing (which is the same for all alignments) is given in an X-line at the start of the data file.
T <b-displacements: int_list>
Q <segment diffs: int_list>
X <trace spacing:int> // 1st data line before any objects
6. LAcat [-v] <source:las> ... > <target>.las
The sequence of <source> files (that can contain @-sign block ranges) are concatenated in order into a single .las file and pipe the result to the standard output. The -v option reports the files concatenated and the number of la's within them to standard error (as the standard output receives the concatenated file).
7. LAsplit [-v] <target:las> (<parts:int> | <path:db|dam>) < <source>.las
If the second argument is an integer n, then divide the alignment file <source>, piped in through the standard input, as evenly as possible into n alignment files with the names specified by template <target>, subject to the restriction that all alignment records for a given a-read are in the same file. The name of the n files is the string <target> where the single @-sign that occurs somewhere in it is replaced by i for i in [1,n] and a .las extension is added if necessary.
If the second argument refers to a database <path>.db that has been partitioned, then divide the input alignment file into block .las files where all records whose a-read is in <path>.i.db are in the i'th file generated from the template <target>. The -v option reports the files produced and the number of la's within them to standard error.
8. LAcheck [-vaS] <src1:db|dam> [ <src2:db|dam> ] <align:las> ...
LAcheck checks each .las file for structural integrity, where the a- and b-sequences come from src1 or from src1 and scr2, respectively. That is, it makes sure each file makes sense as a plausible .las file, e.g. values are not out of bound, the number of records is correct, the number of trace points for a record is correct, and so on. If the -S option is set then it further checks that the alignments are in sorted order, by default pile order, but if -a is also set, then map order. If the -v option is set then a line is output for each .las file saying either the file is OK or reporting the first error. If the -v option is not set then the program runs silently. The exit status is 0 if every file is deemed good, and 1 if at least one of the files looks corrupted.
With the introduction of damapper, LAcheck checks to see if a file has chain information, and if it does, then it checks the validity of chains and checks the sorting order of chains as a unit according to the -a option.
9. HPC.daligner [-vad] [-t<int>] [-w<int(6)>] [-l<int(1500)] [-s<int(100)] [-M<int>]
[-P<dir(/tmp)>] [-B<int(4)>] [-T<int(4)>] [-f<name>]
( [-k<int(16)>] [-h<int(50)>] [-e<double(.75)] [-H<int>]
[-k<int(20)>] [-h<int(50)>] [-e<double(.85)] <ref:db|dam> )
[-m<track>]+ <reads:db|dam> [<first:int>[-<last:int>]]
HPC.daligner writes a UNIX shell script to the standard output or to a series of files beginning with the prefix <name> if the -f option is set, that either performs an "overlap" computation on all the blocks in a single database, or a "comparison" computation on all pairs of blocks between two databases, depending on whether it is given one or two DB's as arguments (<ref> and <reads>). We describe the overlap script first and its effect first and then later the comparison script.
An Overlap Script: consists of a sequence of commands that effectively run daligner on all pairs of blocks of a split database and then externally sorts and merges them using LAsort and LAmerge into a collection of alignment files with names <path>.#.las where # ranges from 1 to the number of blocks the data base is split into. These sorted files if concatenated by say LAcat would contain all the alignments in sorted order (of a-read, then b-read, ...). Moreover, all overlaps for a given a-read are guaranteed to not be split across files, so one can run artifact analyzers or error correction on each sorted file in parallel.
The data base must have been previously split by DBsplit and all the parameters, except -a, -d, -f, -B, and -D, are passed through to the calls to daligner. The defaults for these parameters are as for daligner. The -v and -a flags are passed to all calls to LAsort and LAmerge. All other options are described later. For a database divided into N sub-blocks, the calls to daligner will produce in total N2 .las files, on per block pair. These are then merged so that there is 1 file per row of the N x N block matrix. So at the end one has N sorted .las files, one per block of A-reads, that when concatenated would give a single large sorted overlap file.
The -B option (default 4) gives the desired number of block comparisons per call to daligner. Some must contain B-1 comparisons, and the first B-2 block comparisons even less, but the HPCdaligner "planner" does the best it can to give an average load of -B block comparisons per command.
If the integers <first> and <last> are missing then the script produced is for every block in the database. If <first> is present then HPCdaligner produces an incremental script that compares blocks <first> through <last> (<last> = <first> if not present) against each other and all previous blocks 1 through <first>-1, and then incrementally updates the .las files for blocks 1 through <first>-1, and creates the .las files for blocks <first> through <last>.
A Comparison Script: consists of a sequence of commands that effectively maps every read in the DB <reads> against a reference set of sequences in the DB <ref>, recording all the found local alignments in the sequence of files <reads>.1.<ref>.las, <reads>.2.<ref>.las, ... where <reads>.<ref>.k.las contains the alignments between all of <ref> and the k'th block of <reads>. The parameters are exactly the same as for the overlap script save that the -k, -h, and -e defaults are set more stringently for mapping, and the -A, -I , and -H options make no sense as <ref> and <reads> are expected to be distinct data sets. If the integers <first> and <last> are missing then the script produced is for every block in the database <reads>. If <first> is present then HPC.daligner produces a script that compares blocks <first> through <last> (<last> = <first> if not present) of <reads> against DAM <ref>.
The command scripts output by HPC.daligner and other HPC.<x> programs consists of command blocks each of which begins with a comment line (begins with #) followed by a potentially long list of lines each containing a shell command. Command blocks whose comment mentions "jobs" and gives the number of said in parenthesis, we call parallel blocks because each command line in the block can be sent to a node in a cluster for independent execution, i.e. none of the commands in a block depend on another in the block. The remaining command blocks we call house-keeping blocks because they can be executed by the shell on the launch/server node and the commands are either checking the integrity of .las files with LAcheck, or removing intermediate files with rm. Each block should be performed in the order given and should complete before the next block is performed.
If the -f option is set, then each command block is written to a file with a name of the form <name>.#.<description> where <name> is specified by the user in the -f option argument, # gives the order in which the command block in the given file is to be performed in relation to other command block files, and <description> is a (very) short symbolic reminder of what the block is doing. For example, "HPC.daligner -fJOBS DB" would produce the files:
JOBS.01.OVL
JOBS.02.CHECK.OPT
JOBS.03.MERGE
JOBS.04.RM.OPT
There are always 4 command blocks. The files with the suffix .OPT are optional and need not be executed albeit we highly recommend that one run the CHECK block. One should not run the RM block if one wants to later use DASrealign after scrubbing.
A new -d option requests scripts that organize files into a collection of sub-directories so as not to overwhelm the underlying OS for large genomes. Recall that for a DB divided into N blocks, the daligner will produce N2 .las-files. With the -d option set, N sub-directories (with respect to the directory HPC.daligner is called in) of the form "work<i>" for i from 1 to N are created in an initial command block, and then all work files are placed in those sub-directories, with a maximum of 2N files appearing in any sub-directory at any given point in the process.
Example:
// Recall G.db from the example in DAZZ_DB/README
> cat G.db
files = 1
1862 G Sim
blocks = 2
size = 11 cutoff = 0 all = 0
0 0
1024 1024
1862 1862
> HPCdaligner -mdust -t5 G | csh -v // Run the HPCdaligner script
# Dazzler jobs (2)
dazzler -d -t5 -mdust G.1 G.1
dazzler -d -t5 -mdust G.2 G.1 G.2
# Initial sort jobs (4)
LAsort G.1.G.1.*.las && LAmerge G.L1.1.1 G.1.G.1.*.S.las && rm G.1.G.1.*.S.las
LAsort G.1.G.2.*.las && LAmerge G.L1.1.2 G.1.G.2.*.S.las && rm G.1.G.2.*.S.las
LAsort G.2.G.1.*.las && LAmerge G.L1.2.1 G.2.G.1.*.S.las && rm G.2.G.1.*.S.las
LAsort G.2.G.2.*.las && LAmerge G.L1.2.2 G.2.G.2.*.S.las && rm G.2.G.2.*.S.las
# Level 1 jobs (2)
LAmerge G.1 G.L1.1.1 G.L1.1.2 && rm G.L1.1.1.las G.L1.1.2.las
LAmerge G.2 G.L1.2.1 G.L1.2.2 && rm G.L1.2.1.las G.L1.2.2.las
> LAshow -c -a:G -w50 G.1 | more // Take a look at the result !
G.1: 34,510 records
1 9 c [ 0.. 1,876] x [ 9,017..10,825] ( 18 trace pts)
12645
A ---------+====> dif/(len1+len2) = 398/(1876+1808) = 21.61%
B <====+---------
9017
1 ..........gtg-cggt--caggggtgcctgc-t-t-atcgcaatgtta
|||*||||**||||||||*||||*|*|*||**|*|*||||
9008 gagaggccaagtggcggtggcaggggtg-ctgcgtcttatatccaggtta 27.5%
35 ta-ctgggtggttaaacttagccaggaaacctgttgaaataa-acggtgg
||*|||||||||||||*|**|*||*|*||||||*|**|||||*|*|||||
9057 tagctgggtggttaaa-tctg-ca-g-aacctg-t--aataacatggtgg 24.0%
83 -ctagtggcttgccgtttacccaacagaagcataatgaaa-tttgaaagt
*||||||||*||||||||*||**||||*|||**|||||||*||||*||||
9100 gctagtggc-tgccgttt-ccgcacag-agc--aatgaaaatttg-aagt 20.0%
131 ggtaggttcctgctgtct-acatacagaacgacggagcgaaaaggtaccg
||*|||||||||||||*|*||||*|*|*||||||||||*||||||||||*
9144 gg-aggttcctgctgt-tcacat-c-ggacgacggagc-aaaaggtacc- 16.0%
...
> LAcat G >G.las // Combine G.1.las & G.2.las into a single .las file
> LAshow G G | more // Take another look, now at G.las
G: 62,654 records
1 9 c [ 0.. 1,876] x [ 9,017..10,825] : < 398 diffs ( 18 trace pts)
1 38 c [ 0.. 7,107] x [ 5,381..12,330] : < 1,614 diffs ( 71 trace pts)
1 49 n [ 5,493..14,521] x [ 0.. 9,065] : < 2,028 diffs ( 91 trace pts)
1 68 n [12,809..14,521] x [ 0.. 1,758] : < 373 diffs ( 17 trace pts)
1 147 c [ 0..13,352] x [ 854..14,069] : < 2,993 diffs (133 trace pts)
1 231 n [10,892..14,521] x [ 0.. 3,735] : < 816 diffs ( 37 trace pts)
1 292 c [ 3,835..14,521] x [ 0..10,702] : < 2,353 diffs (107 trace pts)
1 335 n [ 7,569..14,521] x [ 0.. 7,033] : < 1,544 diffs ( 70 trace pts)
1 377 c [ 9,602..14,521] x [ 0.. 5,009] : < 1,104 diffs ( 49 trace pts)
1 414 c [ 6,804..14,521] x [ 0.. 7,812] : < 1,745 diffs ( 77 trace pts)
1 415 c [ 0.. 3,613] x [ 7,685..11,224] : < 840 diffs ( 36 trace pts)
1 445 c [ 9,828..14,521] x [ 0.. 4,789] : < 1,036 diffs ( 47 trace pts)
1 464 n [ 0.. 1,942] x [12,416..14,281] : < 411 diffs ( 19 trace pts)
...