installing Demuxlet #40
Comments
|
You need to install htslib first in a sibling directory.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : hmkang@umich.edu
…On Thu, Mar 14, 2019 at 9:48 AM Siyao Liu ***@***.***> wrote:
Hello,
I am having some trouble installing Demuxlet on my Mac. I followed the
instructions step by step by README2.md and everything was ran fine until I
was trying to run $make after I downloaded demuxlet. Here is the error
message I got:
3 warnings generated. mv -f .deps/filter.Tpo .deps/filter.Po
/usr/local/Cellar/llvm/7.0.1/bin/clang++ -DHAVE_CONFIG_H -I. -I ../htslib/
-I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall
-Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT
tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o tsv_reader.o
tsv_reader.cpp mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po
/usr/local/Cellar/llvm/7.0.1/bin/clang++ -DHAVE_CONFIG_H -I. -I ../htslib/
-I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall
-Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT
cmd_cram_demuxlet.o -MD -MP -MF .deps/cmd_cram_demuxlet.Tpo -c -o
cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp mv -f .deps/cmd_cram_demuxlet.Tpo
.deps/cmd_cram_demuxlet.Po make[1]: *** No rule to make target ../htslib/libhts.a',
needed by demuxlet'. Stop. make: *** [all] Error 2
Can someone please help me? Thanks very much!
Siyao
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#40>, or mute the thread
<https://github.com/notifications/unsubscribe-auth/AF-OuR-4OX21ZDartBOE7W4vuFAVHYE8ks5vWlMLgaJpZM4b0L-p>
.
|
|
I did install htslib in the silbling folder first. |
|
Does libhts.a exist?
…On Fri, Mar 15, 2019, 4:11 PM Hyun Min Kang ***@***.*** wrote:
You need to install htslib first in a sibling directory.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : ***@***.***
On Thu, Mar 14, 2019 at 9:48 AM Siyao Liu ***@***.***>
wrote:
> Hello,
>
> I am having some trouble installing Demuxlet on my Mac. I followed the
> instructions step by step by README2.md and everything was ran fine until I
> was trying to run $make after I downloaded demuxlet. Here is the error
> message I got:
>
> 3 warnings generated. mv -f .deps/filter.Tpo .deps/filter.Po
> /usr/local/Cellar/llvm/7.0.1/bin/clang++ -DHAVE_CONFIG_H -I. -I ../htslib/
> -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall
> -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT
> tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o tsv_reader.o
> tsv_reader.cpp mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po
> /usr/local/Cellar/llvm/7.0.1/bin/clang++ -DHAVE_CONFIG_H -I. -I ../htslib/
> -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall
> -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT
> cmd_cram_demuxlet.o -MD -MP -MF .deps/cmd_cram_demuxlet.Tpo -c -o
> cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp mv -f .deps/cmd_cram_demuxlet.Tpo
> .deps/cmd_cram_demuxlet.Po make[1]: *** No rule to make target ../htslib/libhts.a',
> needed by demuxlet'. Stop. make: *** [all] Error 2
>
> Can someone please help me? Thanks very much!
>
> Siyao
>
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub
> <#40>, or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AF-OuR-4OX21ZDartBOE7W4vuFAVHYE8ks5vWlMLgaJpZM4b0L-p>
> .
>
|
|
Yes. It does exist. Can you please help me fix the error? I really want to try running Demuxlet on my data, but not being able to install the software prevent me from moving further. Thanks! |
|
is anyone going to pick this up ??...having the same issue :) |
|
+Anton who should have some bandwidth to look into these issues.
… On Apr 26, 2019, at 7:46 AM, ibseq ***@***.***> wrote:
is anyone going to pick this up ??...having the same issue :)
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub <#40 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABCQY7YT3ALFDZVPILVBKJLPSMIUVANCNFSM4G6QX6UQ>.
|
|
I believe that this is because htslib.a does not exist in the proper place,
as the error message shows.
Go to the parent folder of demuxlet and try if all three commands works
$ ls demuxlet/
$ ls htslib/
$ ls htslib/libhts.a
If all three commands works without errors, please let me know what the
output is.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : hmkang@umich.edu
…On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***> wrote:
is anyone going to pick this up ??...having the same issue :)
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#40 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ>
.
|
|
Hi Hyun,
This is what I had done from instructions in https://github.com/samtools/htslib <https://github.com/samtools/htslib> and https://github.com/statgen/demuxlet <https://github.com/statgen/demuxlet> . In yellow the commands, bottom red, the error. As you can see, demuxlet is in the same directory as htslib
I cloned the htslib-1.9 on my desktop and:
(citeseq_tools) wmnd-ibassano:Desktop ibassano$ cd htslib-1.9
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ autoheader
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ autoconf
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ ./configure
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for ranlib... ranlib
checking for grep that handles long lines and -e... /usr/bin/grep
checking for C compiler warning flags... -Wall
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGEFILE_SOURCE value needed for large files... no
checking shared library type for unknown-Darwin... Darwin dylib
checking how to run the C preprocessor... gcc -E
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for gmtime_r... yes
checking for fsync... yes
checking for drand48... yes
checking whether fdatasync is declared... no
checking for library containing log... none required
checking for zlib.h... yes
checking for inflate in -lz... yes
checking for library containing recv... none required
checking for bzlib.h... yes
checking for BZ2_bzBuffToBuffCompress in -lbz2... yes
checking for lzma.h... yes
checking for lzma_easy_buffer_encode in -llzma... yes
checking for libdeflate.h... no
checking for libdeflate_deflate_compress in -ldeflate... no
checking for curl_easy_pause in -lcurl... yes
checking for CCHmac... yes
checking whether PTHREAD_MUTEX_RECURSIVE is declared... yes
configure: creating ./config.status
config.status: creating config.mk
config.status: creating htslib.pc.tmp
config.status: creating config.h
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ make
gcc -Wall -g -O2 -I. -c -o kfunc.o kfunc.c
gcc -Wall -g -O2 -I. -c -o knetfile.o knetfile.c
gcc -Wall -g -O2 -I. -c -o kstring.o kstring.c
gcc -Wall -g -O2 -I. -c -o bcf_sr_sort.o bcf_sr_sort.c
gcc -Wall -g -O2 -I. -c -o bgzf.o bgzf.c
gcc -Wall -g -O2 -I. -c -o errmod.o errmod.c
gcc -Wall -g -O2 -I. -c -o faidx.o faidx.c
gcc -Wall -g -O2 -I. -c -o hfile.o hfile.c
gcc -Wall -g -O2 -I. -c -o hfile_net.o hfile_net.c
echo '#define HTS_VERSION "1.9"' > version.h
gcc -Wall -g -O2 -I. -c -o hts.o hts.c
gcc -Wall -g -O2 -I. -c -o hts_os.o hts_os.c
gcc -Wall -g -O2 -I. -c -o md5.o md5.c
gcc -Wall -g -O2 -I. -c -o multipart.o multipart.c
gcc -Wall -g -O2 -I. -c -o probaln.o probaln.c
gcc -Wall -g -O2 -I. -c -o realn.o realn.c
gcc -Wall -g -O2 -I. -c -o regidx.o regidx.c
gcc -Wall -g -O2 -I. -c -o sam.o sam.c
gcc -Wall -g -O2 -I. -c -o synced_bcf_reader.o synced_bcf_reader.c
gcc -Wall -g -O2 -I. -c -o vcf_sweep.o vcf_sweep.c
gcc -Wall -g -O2 -I. -c -o tbx.o tbx.c
gcc -Wall -g -O2 -I. -c -o textutils.o textutils.c
gcc -Wall -g -O2 -I. -c -o thread_pool.o thread_pool.c
gcc -Wall -g -O2 -I. -c -o vcf.o vcf.c
gcc -Wall -g -O2 -I. -c -o vcfutils.o vcfutils.c
gcc -Wall -g -O2 -I. -c -o cram/cram_codecs.o cram/cram_codecs.c
gcc -Wall -g -O2 -I. -c -o cram/cram_decode.o cram/cram_decode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_encode.o cram/cram_encode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_external.o cram/cram_external.c
gcc -Wall -g -O2 -I. -c -o cram/cram_index.o cram/cram_index.c
gcc -Wall -g -O2 -I. -c -o cram/cram_io.o cram/cram_io.c
gcc -Wall -g -O2 -I. -c -o cram/cram_samtools.o cram/cram_samtools.c
gcc -Wall -g -O2 -I. -c -o cram/cram_stats.o cram/cram_stats.c
gcc -Wall -g -O2 -I. -c -o cram/files.o cram/files.c
gcc -Wall -g -O2 -I. -c -o cram/mFILE.o cram/mFILE.c
gcc -Wall -g -O2 -I. -c -o cram/open_trace_file.o cram/open_trace_file.c
gcc -Wall -g -O2 -I. -c -o cram/pooled_alloc.o cram/pooled_alloc.c
gcc -Wall -g -O2 -I. -c -o cram/rANS_static.o cram/rANS_static.c
gcc -Wall -g -O2 -I. -c -o cram/sam_header.o cram/sam_header.c
gcc -Wall -g -O2 -I. -c -o cram/string_alloc.o cram/string_alloc.c
gcc -Wall -g -O2 -I. -c -o hfile_libcurl.o hfile_libcurl.c
gcc -Wall -g -O2 -I. -c -o hfile_gcs.o hfile_gcs.c
gcc -Wall -g -O2 -I. -c -o hfile_s3.o hfile_s3.c
ar -rc libhts.a kfunc.o knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o faidx.o hfile.o hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o realn.o regidx.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o cram/cram_decode.o cram/cram_encode.o cram/cram_external.o cram/cram_index.o cram/cram_io.o cram/cram_samtools.o cram/cram_stats.o cram/files.o cram/mFILE.o cram/open_trace_file.o cram/pooled_alloc.o cram/rANS_static.o cram/sam_header.o cram/string_alloc.o hfile_libcurl.o hfile_gcs.o hfile_s3.o
ranlib libhts.a
gcc -dynamiclib -install_name /usr/local/lib/libhts.2.dylib -current_version 1.9 -compatibility_version 2 -o libhts.dylib kfunc.o knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o faidx.o hfile.o hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o realn.o regidx.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o cram/cram_decode.o cram/cram_encode.o cram/cram_external.o cram/cram_index.o cram/cram_io.o cram/cram_samtools.o cram/cram_stats.o cram/files.o cram/mFILE.o cram/open_trace_file.o cram/pooled_alloc.o cram/rANS_static.o cram/sam_header.o cram/string_alloc.o hfile_libcurl.o hfile_gcs.o hfile_s3.o -llzma -lbz2 -lz -lcurl
ln -sf libhts.dylib libhts.2.dylib
gcc -Wall -g -O2 -I. -c -o bgzip.o bgzip.c
gcc -o bgzip bgzip.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o htsfile.o htsfile.c
gcc -o htsfile htsfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o tabix.o tabix.c
gcc -o tabix tabix.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/hts_endian.o test/hts_endian.c
gcc -o test/hts_endian test/hts_endian.o -llzma -lbz2 -lz -lcurl
gcc -Wall -g -O2 -I. -c -o test/fieldarith.o test/fieldarith.c
gcc -o test/fieldarith test/fieldarith.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/hfile.o test/hfile.c
gcc -o test/hfile test/hfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/sam.o test/sam.c
gcc -o test/sam test/sam.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_bgzf.o test/test_bgzf.c
gcc -o test/test_bgzf test/test_bgzf.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_realn.o test/test_realn.c
gcc -o test/test_realn test/test_realn.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-regidx.o test/test-regidx.c
gcc -o test/test-regidx test/test-regidx.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_view.o test/test_view.c
gcc -o test/test_view test/test_view.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-api.o test/test-vcf-api.c
gcc -o test/test-vcf-api test/test-vcf-api.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-sweep.o test/test-vcf-sweep.c
gcc -o test/test-vcf-sweep test/test-vcf-sweep.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-bcf-sr.o test/test-bcf-sr.c
gcc -o test/test-bcf-sr test/test-bcf-sr.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-bcf-translate.o test/test-bcf-translate.c
gcc -o test/test-bcf-translate test/test-bcf-translate.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ make install
mkdir -p -m 755 /usr/local/bin /usr/local/include /usr/local/include/htslib /usr/local/lib /usr/local/share/man/man1 /usr/local/share/man/man5 /usr/local/lib/pkgconfig
if test -n ""; then mkdir -p -m 755 ; fi
install -p libhts.dylib /usr/local/lib/libhts.1.9.dylib
ln -sf libhts.1.9.dylib /usr/local/lib/libhts.dylib
ln -sf libhts.1.9.dylib /usr/local/lib/libhts.2.dylib
sed -e 's#@-includedir@#/usr/local/include#g;s#@-libdir@#/usr/local/lib#g;s#@-PACKAGE_VERSION@#1.9#g' htslib.pc.tmp > /usr/local/lib/pkgconfig/htslib.pc
chmod 644 /usr/local/lib/pkgconfig/htslib.pc
install -p bgzip htsfile tabix /usr/local/bin
if test -n ""; then install -p ; fi
install -p -m 644 htslib/*.h /usr/local/include/htslib
install -p -m 644 libhts.a /usr/local/lib/libhts.a
install -p -m 644 bgzip.1 htsfile.1 tabix.1 /usr/local/share/man/man1
install -p -m 644 faidx.5 sam.5 vcf.5 /usr/local/share/man/man5
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ git clone https://github.com/statgen/demuxlet.git
Cloning into 'demuxlet'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 344 (delta 0), reused 0 (delta 0), pack-reused 340
Receiving objects: 100% (344/344), 6.75 MiB | 9.00 MiB/s, done.
Resolving deltas: 100% (174/174), done.
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ cd demuxlet/
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: configure.ac: creating directory aux-dist
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'aux-dist'.
glibtoolize: copying file 'aux-dist/ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
glibtoolize: copying file 'm4/libtool.m4'
glibtoolize: copying file 'm4/ltoptions.m4'
glibtoolize: copying file 'm4/ltsugar.m4'
glibtoolize: copying file 'm4/ltversion.m4'
glibtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf --force
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:45: installing 'aux-dist/compile'
configure.ac:45: installing 'aux-dist/config.guess'
configure.ac:45: installing 'aux-dist/config.sub'
configure.ac:7: installing 'aux-dist/install-sh'
configure.ac:7: installing 'aux-dist/missing'
Makefile.am: installing 'aux-dist/depcomp'
autoreconf: Leaving directory `.'
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure --prefix/usr/local/
configure: error: unrecognized option: `--prefix/usr/local/'
Try `./configure --help' for more information
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure --prefix=/usr/local/
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... aux-dist/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for inline... inline
checking for int32_t... yes
checking for int64_t... yes
checking for C/C++ restrict keyword... __restrict
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for ptrdiff_t... yes
checking for error_at_line... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking whether sys/types.h defines makedev... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for working strtod... yes
checking for floor... yes
checking for gethostname... yes
checking for memset... yes
checking for pow... yes
checking for select... yes
checking for sqrt... yes
checking for strchr... yes
checking for strstr... yes
checking for strtol... yes
checking for gzopen in -lz... yes
checking for erf in -lm... yes
checking for erfc in -lm... yes
checking build system type... x86_64-apple-darwin18.5.0
checking host system type... x86_64-apple-darwin18.5.0
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking how to convert x86_64-apple-darwin18.5.0 file names to x86_64-apple-darwin18.5.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin18.5.0 file names to toolchain format... func_convert_file_noop
checking for /Library/Developer/CommandLineTools/usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is GNU ld... no
checking whether the g++ linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ make
/Library/Developer/CommandLineTools/usr/bin/make all-am
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT Error.o -MD -MP -MF .deps/Error.Tpo -c -o Error.o Error.cpp
mv -f .deps/Error.Tpo .deps/Error.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT PhredHelper.o -MD -MP -MF .deps/PhredHelper.Tpo -c -o PhredHelper.o PhredHelper.cpp
mv -f .deps/PhredHelper.Tpo .deps/PhredHelper.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT params.o -MD -MP -MF .deps/params.Tpo -c -o params.o params.cpp
params.cpp:77:14: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
::printf(buf);
^~~
params.cpp:77:14: note: treat the string as an argument to avoid this
::printf(buf);
^
"%s",
1 warning generated.
mv -f .deps/params.Tpo .deps/params.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT hts_utils.o -MD -MP -MF .deps/hts_utils.Tpo -c -o hts_utils.o hts_utils.cpp
mv -f .deps/hts_utils.Tpo .deps/hts_utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT bcf_ordered_reader.o -MD -MP -MF .deps/bcf_ordered_reader.Tpo -c -o bcf_ordered_reader.o bcf_ordered_reader.cpp
mv -f .deps/bcf_ordered_reader.Tpo .deps/bcf_ordered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT interval.o -MD -MP -MF .deps/interval.Tpo -c -o interval.o interval.cpp
mv -f .deps/interval.Tpo .deps/interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT interval_tree.o -MD -MP -MF .deps/interval_tree.Tpo -c -o interval_tree.o interval_tree.cpp
mv -f .deps/interval_tree.Tpo .deps/interval_tree.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT utils.o -MD -MP -MF .deps/utils.Tpo -c -o utils.o utils.cpp
mv -f .deps/utils.Tpo .deps/utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT genome_interval.o -MD -MP -MF .deps/genome_interval.Tpo -c -o genome_interval.o genome_interval.cpp
mv -f .deps/genome_interval.Tpo .deps/genome_interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT reference_sequence.o -MD -MP -MF .deps/reference_sequence.Tpo -c -o reference_sequence.o reference_sequence.cpp
mv -f .deps/reference_sequence.Tpo .deps/reference_sequence.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT bcf_chunked_reader.o -MD -MP -MF .deps/bcf_chunked_reader.Tpo -c -o bcf_chunked_reader.o bcf_chunked_reader.cpp
mv -f .deps/bcf_chunked_reader.Tpo .deps/bcf_chunked_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT genomeChunk.o -MD -MP -MF .deps/genomeChunk.Tpo -c -o genomeChunk.o genomeChunk.cpp
mv -f .deps/genomeChunk.Tpo .deps/genomeChunk.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT sam_filtered_reader.o -MD -MP -MF .deps/sam_filtered_reader.Tpo -c -o sam_filtered_reader.o sam_filtered_reader.cpp
mv -f .deps/sam_filtered_reader.Tpo .deps/sam_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT sc_drop_seq.o -MD -MP -MF .deps/sc_drop_seq.Tpo -c -o sc_drop_seq.o sc_drop_seq.cpp
mv -f .deps/sc_drop_seq.Tpo .deps/sc_drop_seq.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT bcf_filtered_reader.o -MD -MP -MF .deps/bcf_filtered_reader.Tpo -c -o bcf_filtered_reader.o bcf_filtered_reader.cpp
mv -f .deps/bcf_filtered_reader.Tpo .deps/bcf_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT filter.o -MD -MP -MF .deps/filter.Tpo -c -o filter.o filter.cpp
filter.cpp:1637:23: warning: variable 'ival' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival = ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1639:22: note: uninitialized use occurs here
if ( out[ival].tok_type!=TOK_VAL || !out[ival].key )
^~~~
filter.cpp:1637:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival = ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1631:31: note: initialize the variable 'ival' to silence this warning
int itok = i, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'ival' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1617:34: note: uninitialized use occurs here
if ( !strcasecmp(out[ival].key,"snp") || !strcasecmp(out[ival].key,"snps") ) { out[ival].threshold = VCF_SNP<<1; out[ival]...
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:27: note: initialize the variable 'ival' to silence this warning
int itok, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'itok' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1623:22: note: uninitialized use occurs here
if ( out[itok].tok_type==TOK_LIKE || out[itok].tok_type==TOK_NLIKE ) out[itok].comparator = filters_cmp_bit_and;
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:21: note: initialize the variable 'itok' to silence this warning
int itok, ival;
^
= 0
3 warnings generated.
mv -f .deps/filter.Tpo .deps/filter.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o tsv_reader.o tsv_reader.cpp
mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT cmd_cram_demuxlet.o -MD -MP -MF .deps/cmd_cram_demuxlet.Tpo -c -o cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp
mv -f .deps/cmd_cram_demuxlet.Tpo .deps/cmd_cram_demuxlet.Po
make[1]: *** No rule to make target `../htslib/libhts.a', needed by `demuxlet'. Stop.
make: *** [all] Error 2
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$
… On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***> wrote:
I believe that this is because htslib.a does not exist in the proper place,
as the error message shows.
Go to the parent folder of demuxlet and try if all three commands works
$ ls demuxlet/
$ ls htslib/
$ ls htslib/libhts.a
If all three commands works without errors, please let me know what the
output is.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : ***@***.***
On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***> wrote:
> is anyone going to pick this up ??...having the same issue :)
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#40 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ>
> .
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#40 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ>.
|
|
The compiler says libhts.a does not exist, but do you see them exist? That
was my question. If so, what is the directory structure?
…On Fri, Apr 26, 2019, 12:12 PM ibseq ***@***.***> wrote:
Hi Hyun,
This is what I had done from instructions in
https://github.com/samtools/htslib <https://github.com/samtools/htslib>
and https://github.com/statgen/demuxlet <
https://github.com/statgen/demuxlet> . In yellow the commands, bottom
red, the error. As you can see, demuxlet is in the same directory as htslib
I cloned the htslib-1.9 on my desktop and:
(citeseq_tools) wmnd-ibassano:Desktop ibassano$ cd htslib-1.9
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ autoheader
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ autoconf
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ ./configure
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for ranlib... ranlib
checking for grep that handles long lines and -e... /usr/bin/grep
checking for C compiler warning flags... -Wall
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGEFILE_SOURCE value needed for large files... no
checking shared library type for unknown-Darwin... Darwin dylib
checking how to run the C preprocessor... gcc -E
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for gmtime_r... yes
checking for fsync... yes
checking for drand48... yes
checking whether fdatasync is declared... no
checking for library containing log... none required
checking for zlib.h... yes
checking for inflate in -lz... yes
checking for library containing recv... none required
checking for bzlib.h... yes
checking for BZ2_bzBuffToBuffCompress in -lbz2... yes
checking for lzma.h... yes
checking for lzma_easy_buffer_encode in -llzma... yes
checking for libdeflate.h... no
checking for libdeflate_deflate_compress in -ldeflate... no
checking for curl_easy_pause in -lcurl... yes
checking for CCHmac... yes
checking whether PTHREAD_MUTEX_RECURSIVE is declared... yes
configure: creating ./config.status
config.status: creating config.mk
config.status: creating htslib.pc.tmp
config.status: creating config.h
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ make
gcc -Wall -g -O2 -I. -c -o kfunc.o kfunc.c
gcc -Wall -g -O2 -I. -c -o knetfile.o knetfile.c
gcc -Wall -g -O2 -I. -c -o kstring.o kstring.c
gcc -Wall -g -O2 -I. -c -o bcf_sr_sort.o bcf_sr_sort.c
gcc -Wall -g -O2 -I. -c -o bgzf.o bgzf.c
gcc -Wall -g -O2 -I. -c -o errmod.o errmod.c
gcc -Wall -g -O2 -I. -c -o faidx.o faidx.c
gcc -Wall -g -O2 -I. -c -o hfile.o hfile.c
gcc -Wall -g -O2 -I. -c -o hfile_net.o hfile_net.c
echo '#define HTS_VERSION "1.9"' > version.h
gcc -Wall -g -O2 -I. -c -o hts.o hts.c
gcc -Wall -g -O2 -I. -c -o hts_os.o hts_os.c
gcc -Wall -g -O2 -I. -c -o md5.o md5.c
gcc -Wall -g -O2 -I. -c -o multipart.o multipart.c
gcc -Wall -g -O2 -I. -c -o probaln.o probaln.c
gcc -Wall -g -O2 -I. -c -o realn.o realn.c
gcc -Wall -g -O2 -I. -c -o regidx.o regidx.c
gcc -Wall -g -O2 -I. -c -o sam.o sam.c
gcc -Wall -g -O2 -I. -c -o synced_bcf_reader.o synced_bcf_reader.c
gcc -Wall -g -O2 -I. -c -o vcf_sweep.o vcf_sweep.c
gcc -Wall -g -O2 -I. -c -o tbx.o tbx.c
gcc -Wall -g -O2 -I. -c -o textutils.o textutils.c
gcc -Wall -g -O2 -I. -c -o thread_pool.o thread_pool.c
gcc -Wall -g -O2 -I. -c -o vcf.o vcf.c
gcc -Wall -g -O2 -I. -c -o vcfutils.o vcfutils.c
gcc -Wall -g -O2 -I. -c -o cram/cram_codecs.o cram/cram_codecs.c
gcc -Wall -g -O2 -I. -c -o cram/cram_decode.o cram/cram_decode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_encode.o cram/cram_encode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_external.o cram/cram_external.c
gcc -Wall -g -O2 -I. -c -o cram/cram_index.o cram/cram_index.c
gcc -Wall -g -O2 -I. -c -o cram/cram_io.o cram/cram_io.c
gcc -Wall -g -O2 -I. -c -o cram/cram_samtools.o cram/cram_samtools.c
gcc -Wall -g -O2 -I. -c -o cram/cram_stats.o cram/cram_stats.c
gcc -Wall -g -O2 -I. -c -o cram/files.o cram/files.c
gcc -Wall -g -O2 -I. -c -o cram/mFILE.o cram/mFILE.c
gcc -Wall -g -O2 -I. -c -o cram/open_trace_file.o cram/open_trace_file.c
gcc -Wall -g -O2 -I. -c -o cram/pooled_alloc.o cram/pooled_alloc.c
gcc -Wall -g -O2 -I. -c -o cram/rANS_static.o cram/rANS_static.c
gcc -Wall -g -O2 -I. -c -o cram/sam_header.o cram/sam_header.c
gcc -Wall -g -O2 -I. -c -o cram/string_alloc.o cram/string_alloc.c
gcc -Wall -g -O2 -I. -c -o hfile_libcurl.o hfile_libcurl.c
gcc -Wall -g -O2 -I. -c -o hfile_gcs.o hfile_gcs.c
gcc -Wall -g -O2 -I. -c -o hfile_s3.o hfile_s3.c
ar -rc libhts.a kfunc.o knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o
faidx.o hfile.o hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o
realn.o regidx.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o
thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o cram/cram_decode.o
cram/cram_encode.o cram/cram_external.o cram/cram_index.o cram/cram_io.o
cram/cram_samtools.o cram/cram_stats.o cram/files.o cram/mFILE.o
cram/open_trace_file.o cram/pooled_alloc.o cram/rANS_static.o
cram/sam_header.o cram/string_alloc.o hfile_libcurl.o hfile_gcs.o hfile_s3.o
ranlib libhts.a
gcc -dynamiclib -install_name /usr/local/lib/libhts.2.dylib
-current_version 1.9 -compatibility_version 2 -o libhts.dylib kfunc.o
knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o faidx.o hfile.o
hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o realn.o regidx.o
sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o thread_pool.o vcf.o
vcfutils.o cram/cram_codecs.o cram/cram_decode.o cram/cram_encode.o
cram/cram_external.o cram/cram_index.o cram/cram_io.o cram/cram_samtools.o
cram/cram_stats.o cram/files.o cram/mFILE.o cram/open_trace_file.o
cram/pooled_alloc.o cram/rANS_static.o cram/sam_header.o
cram/string_alloc.o hfile_libcurl.o hfile_gcs.o hfile_s3.o -llzma -lbz2 -lz
-lcurl
ln -sf libhts.dylib libhts.2.dylib
gcc -Wall -g -O2 -I. -c -o bgzip.o bgzip.c
gcc -o bgzip bgzip.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o htsfile.o htsfile.c
gcc -o htsfile htsfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o tabix.o tabix.c
gcc -o tabix tabix.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/hts_endian.o test/hts_endian.c
gcc -o test/hts_endian test/hts_endian.o -llzma -lbz2 -lz -lcurl
gcc -Wall -g -O2 -I. -c -o test/fieldarith.o test/fieldarith.c
gcc -o test/fieldarith test/fieldarith.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/hfile.o test/hfile.c
gcc -o test/hfile test/hfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/sam.o test/sam.c
gcc -o test/sam test/sam.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_bgzf.o test/test_bgzf.c
gcc -o test/test_bgzf test/test_bgzf.o libhts.a -lz -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_realn.o test/test_realn.c
gcc -o test/test_realn test/test_realn.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/test-regidx.o test/test-regidx.c
gcc -o test/test-regidx test/test-regidx.o libhts.a -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_view.o test/test_view.c
gcc -o test/test_view test/test_view.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-api.o test/test-vcf-api.c
gcc -o test/test-vcf-api test/test-vcf-api.o libhts.a -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-sweep.o test/test-vcf-sweep.c
gcc -o test/test-vcf-sweep test/test-vcf-sweep.o libhts.a -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-bcf-sr.o test/test-bcf-sr.c
gcc -o test/test-bcf-sr test/test-bcf-sr.o libhts.a -lz -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-bcf-translate.o
test/test-bcf-translate.c
gcc -o test/test-bcf-translate test/test-bcf-translate.o libhts.a -lz
-llzma -lbz2 -lz -lcurl -lpthread
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ make install
mkdir -p -m 755 /usr/local/bin /usr/local/include
/usr/local/include/htslib /usr/local/lib /usr/local/share/man/man1
/usr/local/share/man/man5 /usr/local/lib/pkgconfig
if test -n ""; then mkdir -p -m 755 ; fi
install -p libhts.dylib /usr/local/lib/libhts.1.9.dylib
ln -sf libhts.1.9.dylib /usr/local/lib/libhts.dylib
ln -sf libhts.1.9.dylib /usr/local/lib/libhts.2.dylib
sed -e ***@***.***@***@***.***@
***@***.***_VERSION@#1.9#g' htslib.pc.tmp >
/usr/local/lib/pkgconfig/htslib.pc
chmod 644 /usr/local/lib/pkgconfig/htslib.pc
install -p bgzip htsfile tabix /usr/local/bin
if test -n ""; then install -p ; fi
install -p -m 644 htslib/*.h /usr/local/include/htslib
install -p -m 644 libhts.a /usr/local/lib/libhts.a
install -p -m 644 bgzip.1 htsfile.1 tabix.1 /usr/local/share/man/man1
install -p -m 644 faidx.5 sam.5 vcf.5 /usr/local/share/man/man5
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ git clone
https://github.com/statgen/demuxlet.git
Cloning into 'demuxlet'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 344 (delta 0), reused 0 (delta 0), pack-reused 340
Receiving objects: 100% (344/344), 6.75 MiB | 9.00 MiB/s, done.
Resolving deltas: 100% (174/174), done.
(citeseq_tools) wmnd-ibassano:htslib-1.9 ibassano$ cd demuxlet/
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: configure.ac: creating directory aux-dist
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'aux-dist'.
glibtoolize: copying file 'aux-dist/ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
glibtoolize: copying file 'm4/libtool.m4'
glibtoolize: copying file 'm4/ltoptions.m4'
glibtoolize: copying file 'm4/ltsugar.m4'
glibtoolize: copying file 'm4/ltversion.m4'
glibtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf --force
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:45: installing 'aux-dist/compile'
configure.ac:45: installing 'aux-dist/config.guess'
configure.ac:45: installing 'aux-dist/config.sub'
configure.ac:7: installing 'aux-dist/install-sh'
configure.ac:7: installing 'aux-dist/missing'
Makefile.am: installing 'aux-dist/depcomp'
autoreconf: Leaving directory `.'
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure
--prefix/usr/local/
configure: error: unrecognized option: `--prefix/usr/local/'
Try `./configure --help' for more information
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure
--prefix=/usr/local/
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... aux-dist/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for inline... inline
checking for int32_t... yes
checking for int64_t... yes
checking for C/C++ restrict keyword... __restrict
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for ptrdiff_t... yes
checking for error_at_line... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking whether sys/types.h defines makedev... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for working strtod... yes
checking for floor... yes
checking for gethostname... yes
checking for memset... yes
checking for pow... yes
checking for select... yes
checking for sqrt... yes
checking for strchr... yes
checking for strstr... yes
checking for strtol... yes
checking for gzopen in -lz... yes
checking for erf in -lm... yes
checking for erfc in -lm... yes
checking build system type... x86_64-apple-darwin18.5.0
checking host system type... x86_64-apple-darwin18.5.0
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc...
/Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is
GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking how to convert x86_64-apple-darwin18.5.0 file names to
x86_64-apple-darwin18.5.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin18.5.0 file names to toolchain
format... func_convert_file_noop
checking for /Library/Developer/CommandLineTools/usr/bin/ld option to
reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++...
/Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is
GNU ld... no
checking whether the g++ linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ make
/Library/Developer/CommandLineTools/usr/bin/make all-am
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT Error.o -MD -MP -MF .deps/Error.Tpo -c -o Error.o
Error.cpp
mv -f .deps/Error.Tpo .deps/Error.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT PhredHelper.o -MD -MP -MF .deps/PhredHelper.Tpo -c -o
PhredHelper.o PhredHelper.cpp
mv -f .deps/PhredHelper.Tpo .deps/PhredHelper.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT params.o -MD -MP -MF .deps/params.Tpo -c -o params.o
params.cpp
params.cpp:77:14: warning: format string is not a string literal
(potentially insecure) [-Wformat-security]
::printf(buf);
^~~
params.cpp:77:14: note: treat the string as an argument to avoid this
::printf(buf);
^
"%s",
1 warning generated.
mv -f .deps/params.Tpo .deps/params.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT hts_utils.o -MD -MP -MF .deps/hts_utils.Tpo -c -o
hts_utils.o hts_utils.cpp
mv -f .deps/hts_utils.Tpo .deps/hts_utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT bcf_ordered_reader.o -MD -MP -MF
.deps/bcf_ordered_reader.Tpo -c -o bcf_ordered_reader.o
bcf_ordered_reader.cpp
mv -f .deps/bcf_ordered_reader.Tpo .deps/bcf_ordered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT interval.o -MD -MP -MF .deps/interval.Tpo -c -o
interval.o interval.cpp
mv -f .deps/interval.Tpo .deps/interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT interval_tree.o -MD -MP -MF .deps/interval_tree.Tpo -c
-o interval_tree.o interval_tree.cpp
mv -f .deps/interval_tree.Tpo .deps/interval_tree.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT utils.o -MD -MP -MF .deps/utils.Tpo -c -o utils.o
utils.cpp
mv -f .deps/utils.Tpo .deps/utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT genome_interval.o -MD -MP -MF
.deps/genome_interval.Tpo -c -o genome_interval.o genome_interval.cpp
mv -f .deps/genome_interval.Tpo .deps/genome_interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT reference_sequence.o -MD -MP -MF
.deps/reference_sequence.Tpo -c -o reference_sequence.o
reference_sequence.cpp
mv -f .deps/reference_sequence.Tpo .deps/reference_sequence.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT bcf_chunked_reader.o -MD -MP -MF
.deps/bcf_chunked_reader.Tpo -c -o bcf_chunked_reader.o
bcf_chunked_reader.cpp
mv -f .deps/bcf_chunked_reader.Tpo .deps/bcf_chunked_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT genomeChunk.o -MD -MP -MF .deps/genomeChunk.Tpo -c -o
genomeChunk.o genomeChunk.cpp
mv -f .deps/genomeChunk.Tpo .deps/genomeChunk.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT sam_filtered_reader.o -MD -MP -MF
.deps/sam_filtered_reader.Tpo -c -o sam_filtered_reader.o
sam_filtered_reader.cpp
mv -f .deps/sam_filtered_reader.Tpo .deps/sam_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT sc_drop_seq.o -MD -MP -MF .deps/sc_drop_seq.Tpo -c -o
sc_drop_seq.o sc_drop_seq.cpp
mv -f .deps/sc_drop_seq.Tpo .deps/sc_drop_seq.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT bcf_filtered_reader.o -MD -MP -MF
.deps/bcf_filtered_reader.Tpo -c -o bcf_filtered_reader.o
bcf_filtered_reader.cpp
mv -f .deps/bcf_filtered_reader.Tpo .deps/bcf_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT filter.o -MD -MP -MF .deps/filter.Tpo -c -o filter.o
filter.cpp
filter.cpp:1637:23: warning: variable 'ival' is used uninitialized
whenever 'if' condition is false [-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival
= ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1639:22: note: uninitialized use occurs here
if ( out[ival].tok_type!=TOK_VAL || !out[ival].key )
^~~~
filter.cpp:1637:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival
= ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1631:31: note: initialize the variable 'ival' to silence this
warning
int itok = i, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'ival' is used uninitialized
whenever 'if' condition is false [-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE )
itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1617:34: note: uninitialized use occurs here
if ( !strcasecmp(out[ival].key,"snp") || !strcasecmp(out[ival].key,"snps")
) { out[ival].threshold = VCF_SNP<<1; out[ival]...
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE )
itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:27: note: initialize the variable 'ival' to silence this
warning
int itok, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'itok' is used uninitialized
whenever 'if' condition is false [-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE )
itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1623:22: note: uninitialized use occurs here
if ( out[itok].tok_type==TOK_LIKE || out[itok].tok_type==TOK_NLIKE )
out[itok].comparator = filters_cmp_bit_and;
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE )
itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:21: note: initialize the variable 'itok' to silence this
warning
int itok, ival;
^
= 0
3 warnings generated.
mv -f .deps/filter.Tpo .deps/filter.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o
tsv_reader.o tsv_reader.cpp
mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT cmd_cram_demuxlet.o -MD -MP -MF
.deps/cmd_cram_demuxlet.Tpo -c -o cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp
mv -f .deps/cmd_cram_demuxlet.Tpo .deps/cmd_cram_demuxlet.Po
make[1]: *** No rule to make target `../htslib/libhts.a', needed by
`demuxlet'. Stop.
make: *** [all] Error 2
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$
> On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***>
wrote:
>
> I believe that this is because htslib.a does not exist in the proper
place,
> as the error message shows.
>
> Go to the parent folder of demuxlet and try if all three commands works
> $ ls demuxlet/
> $ ls htslib/
> $ ls htslib/libhts.a
>
> If all three commands works without errors, please let me know what the
> output is.
>
> Hyun.
> -----------------------------------------------------
> Hyun Min Kang, Ph.D.
> Associate Professor of Biostatistics
> University of Michigan, Ann Arbor
> Email : ***@***.***
>
>
> On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***> wrote:
>
> > is anyone going to pick this up ??...having the same issue :)
> >
> > —
> > You are receiving this because you commented.
> > Reply to this email directly, view it on GitHub
> > <#40 (comment)
>,
> > or mute the thread
> > <
https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ
>
> > .
> >
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub <
#40 (comment)>, or
mute the thread <
https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ
>.
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#40 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ABPY5OOCAGMDKCNW35XRPFLPSMSWRANCNFSM4G6QX6UQ>
.
|
|
Hi Hyun,
The first two work, the last doesn’t
Just to make sure I understood:
I cloned htslib first and follow instruction to install it.
In the same folder I cloned demuxlet, cd to demuxlet and installed it.
Correct?
About :
“The compiler says libhts.a does not exist, but do you see them exist? That
was my question. If so, what is the directory structure?”
I opend the htslib folder and a file named “/libhts.a” is found in Desktop/htslib-1.9/libhts.a
Demuxlet is found in Desktop/htslib-1.9/demuxlet
Bw
Irene
… On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***> wrote:
I believe that this is because htslib.a does not exist in the proper place,
as the error message shows.
Go to the parent folder of demuxlet and try if all three commands works
$ ls demuxlet/
$ ls htslib/
$ ls htslib/libhts.a
If all three commands works without errors, please let me know what the
output is.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : ***@***.***
On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***> wrote:
> is anyone going to pick this up ??...having the same issue :)
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#40 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ>
> .
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#40 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ>.
|
|
You need to have demuxlet as a sibling directory to htslib, for example
Desktop/demuxlet.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : hmkang@umich.edu
…On Mon, Apr 29, 2019 at 4:58 AM ibseq ***@***.***> wrote:
Hi Hyun,
The first two work, the last doesn’t
Just to make sure I understood:
I cloned htslib first and follow instruction to install it.
In the same folder I cloned demuxlet, cd to demuxlet and installed it.
Correct?
About :
“The compiler says libhts.a does not exist, but do you see them exist? That
was my question. If so, what is the directory structure?”
I opend the htslib folder and a file named “/libhts.a” is found in
Desktop/htslib-1.9/libhts.a
Demuxlet is found in Desktop/htslib-1.9/demuxlet
Bw
Irene
> On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***>
wrote:
>
> I believe that this is because htslib.a does not exist in the proper
place,
> as the error message shows.
>
> Go to the parent folder of demuxlet and try if all three commands works
> $ ls demuxlet/
> $ ls htslib/
> $ ls htslib/libhts.a
>
> If all three commands works without errors, please let me know what the
> output is.
>
> Hyun.
> -----------------------------------------------------
> Hyun Min Kang, Ph.D.
> Associate Professor of Biostatistics
> University of Michigan, Ann Arbor
> Email : ***@***.***
>
>
> On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***> wrote:
>
> > is anyone going to pick this up ??...having the same issue :)
> >
> > —
> > You are receiving this because you commented.
> > Reply to this email directly, view it on GitHub
> > <#40 (comment)
>,
> > or mute the thread
> > <
https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ
>
> > .
> >
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub <
#40 (comment)>, or
mute the thread <
https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ
>.
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#40 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ABPY5OML3LGT6CEUJP5MJHTPS22DDANCNFSM4G6QX6UQ>
.
|
|
Also, rename htslib as Desktop/htslib, for example.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : hmkang@umich.edu
…On Mon, Apr 29, 2019 at 8:04 AM Hyun Min Kang ***@***.***> wrote:
You need to have demuxlet as a sibling directory to htslib, for example
Desktop/demuxlet.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : ***@***.***
On Mon, Apr 29, 2019 at 4:58 AM ibseq ***@***.***> wrote:
> Hi Hyun,
> The first two work, the last doesn’t
>
> Just to make sure I understood:
> I cloned htslib first and follow instruction to install it.
> In the same folder I cloned demuxlet, cd to demuxlet and installed it.
>
> Correct?
>
> About :
> “The compiler says libhts.a does not exist, but do you see them exist?
> That
> was my question. If so, what is the directory structure?”
>
> I opend the htslib folder and a file named “/libhts.a” is found in
> Desktop/htslib-1.9/libhts.a
>
> Demuxlet is found in Desktop/htslib-1.9/demuxlet
>
> Bw
> Irene
>
> > On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***>
> wrote:
> >
> > I believe that this is because htslib.a does not exist in the proper
> place,
> > as the error message shows.
> >
> > Go to the parent folder of demuxlet and try if all three commands works
> > $ ls demuxlet/
> > $ ls htslib/
> > $ ls htslib/libhts.a
> >
> > If all three commands works without errors, please let me know what the
> > output is.
> >
> > Hyun.
> > -----------------------------------------------------
> > Hyun Min Kang, Ph.D.
> > Associate Professor of Biostatistics
> > University of Michigan, Ann Arbor
> > Email : ***@***.***
> >
> >
> > On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***>
> wrote:
> >
> > > is anyone going to pick this up ??...having the same issue :)
> > >
> > > —
> > > You are receiving this because you commented.
> > > Reply to this email directly, view it on GitHub
> > > <#40 (comment)
> >,
> > > or mute the thread
> > > <
> https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ
> >
> > > .
> > >
> > —
> > You are receiving this because you commented.
> > Reply to this email directly, view it on GitHub <
> #40 (comment)>,
> or mute the thread <
> https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ
> >.
> >
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#40 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/ABPY5OML3LGT6CEUJP5MJHTPS22DDANCNFSM4G6QX6UQ>
> .
>
|
|
Hi Hyun,
I did all the below. See attached. I also upgraded gcc at is seemed the prob but still nothing
BW
Irene
On 29 Apr 2019, at 13:37, Hyun Min Kang ***@***.***> wrote:
Also, rename htslib as Desktop/htslib, for example.
Hyun.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : ***@***.***
On Mon, Apr 29, 2019 at 8:04 AM Hyun Min Kang ***@***.***> wrote:
> You need to have demuxlet as a sibling directory to htslib, for example
> Desktop/demuxlet.
>
> Hyun.
> -----------------------------------------------------
> Hyun Min Kang, Ph.D.
> Associate Professor of Biostatistics
> University of Michigan, Ann Arbor
> Email : ***@***.***
>
>
> On Mon, Apr 29, 2019 at 4:58 AM ibseq ***@***.***> wrote:
>
>> Hi Hyun,
>> The first two work, the last doesn’t
>>
>> Just to make sure I understood:
>> I cloned htslib first and follow instruction to install it.
>> In the same folder I cloned demuxlet, cd to demuxlet and installed it.
>>
>> Correct?
>>
>> About :
>> “The compiler says libhts.a does not exist, but do you see them exist?
>> That
>> was my question. If so, what is the directory structure?”
>>
>> I opend the htslib folder and a file named “/libhts.a” is found in
>> Desktop/htslib-1.9/libhts.a
>>
>> Demuxlet is found in Desktop/htslib-1.9/demuxlet
>>
>> Bw
>> Irene
>>
>> > On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***>
>> wrote:
>> >
>> > I believe that this is because htslib.a does not exist in the proper
>> place,
>> > as the error message shows.
>> >
>> > Go to the parent folder of demuxlet and try if all three commands works
>> > $ ls demuxlet/
>> > $ ls htslib/
>> > $ ls htslib/libhts.a
>> >
>> > If all three commands works without errors, please let me know what the
>> > output is.
>> >
>> > Hyun.
>> > -----------------------------------------------------
>> > Hyun Min Kang, Ph.D.
>> > Associate Professor of Biostatistics
>> > University of Michigan, Ann Arbor
>> > Email : ***@***.***
>> >
>> >
>> > On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***>
>> wrote:
>> >
>> > > is anyone going to pick this up ??...having the same issue :)
>> > >
>> > > —
>> > > You are receiving this because you commented.
>> > > Reply to this email directly, view it on GitHub
>> > > <#40 (comment)
>> >,
>> > > or mute the thread
>> > > <
>> https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ
>> >
>> > > .
>> > >
>> > —
>> > You are receiving this because you commented.
>> > Reply to this email directly, view it on GitHub <
>> #40 (comment)>,
>> or mute the thread <
>> https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ
>> >.
>> >
>>
>> —
>> You are receiving this because you commented.
>> Reply to this email directly, view it on GitHub
>> <#40 (comment)>,
>> or mute the thread
>> <https://github.com/notifications/unsubscribe-auth/ABPY5OML3LGT6CEUJP5MJHTPS22DDANCNFSM4G6QX6UQ>
>> .
>>
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#40 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AH76DQZTKBWOXKW37EO47VLPS3TYRANCNFSM4G6QX6UQ>.
Last login: Mon Apr 29 13:14:52 on ttys004
(base) wmnd-ibassano:~ ibassano$ cd Desktop/
(base) wmnd-ibassano:Desktop ibassano$ brew install gcc
Updating Homebrew...
==> Auto-updated Homebrew!
Updated 2 taps (homebrew/core and homebrew/cask).
==> Updated Formulae
r ✔ golang-migrate neovim
readline ✔ gradle netdata
argyll-cms grpc opencoarrays
badtouch iamy pcapplusplus
ballerina imagemagick@6 pdnsrec
binaryen ipython quazip
buildkit istioctl shfmt
ccache kubeprod silk
cmocka libcoap skaffold
erlang libfixbuf swiftlint
exploitdb libiconv traefik
faas-cli libjson-rpc-cpp typescript
flatbuffers liblinear volt
flow libxo webdis
fn lmod wtf
gel mysql yaf
ghq nats-streaming-server you-get
Error: gcc 8.2.0 is already installed
To upgrade to 8.3.0_2, run `brew upgrade gcc`.
(base) wmnd-ibassano:Desktop ibassano$ brew upgrade gcc
==> Upgrading 1 outdated package:
gcc 8.2.0 -> 8.3.0_2
==> Upgrading gcc
==> Installing dependencies for gcc: isl and mpfr
==> Installing gcc dependency: isl
==> Downloading https://homebrew.bintray.com/bottles/isl-0.21.mojave.bottle.tar.
==> Downloading from https://akamai.bintray.com/f9/f9188b5d486b2a835cd865f219be1
######################################################################## 100.0%
==> Pouring isl-0.21.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/isl/0.21: 72 files, 4.3MB
==> Installing gcc dependency: mpfr
==> Downloading https://homebrew.bintray.com/bottles/mpfr-4.0.2.mojave.bottle.ta
==> Downloading from https://akamai.bintray.com/cf/cfce7ab866e98360c9364cd924da6
######################################################################## 100.0%
==> Pouring mpfr-4.0.2.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/mpfr/4.0.2: 28 files, 4.7MB
==> Installing gcc
==> Downloading https://homebrew.bintray.com/bottles/gcc-8.3.0_2.mojave.bottle.t
==> Downloading from https://akamai.bintray.com/78/78b5b3a98b82f7c89263c5d972a11
######################################################################## 100.0%
==> Pouring gcc-8.3.0_2.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/gcc/8.3.0_2: 1,414 files, 288.5MB
Removing: /usr/local/Cellar/gcc/8.2.0... (1,413 files, 295.9MB)
==> Upgrading 3 dependents:
hdf5 1.10.4 -> 1.10.5, kallisto 0.45.0 -> 0.45.1, r 3.5.2_2 -> 3.6.0
==> Upgrading hdf5
==> Downloading https://homebrew.bintray.com/bottles/hdf5-1.10.5.mojave.bottle.t
==> Downloading from https://akamai.bintray.com/6d/6dc444fd95265b221047a69348d7a
######################################################################## 100.0%
==> Pouring hdf5-1.10.5.mojave.bottle.tar.gz
Warning: hdf5 dependency gcc was built with a different C++ standard
library (libstdc++ from clang). This may cause problems at runtime.
🍺 /usr/local/Cellar/hdf5/1.10.5: 256 files, 14.7MB
Removing: /usr/local/Cellar/hdf5/1.10.4... (262 files, 14.8MB)
==> Upgrading kallisto
==> Downloading https://homebrew.bintray.com/bottles/kallisto-0.45.1.mojave.bott
==> Downloading from https://akamai.bintray.com/60/60b4b2ac31be396caaf7a07d403be
######################################################################## 100.0%
==> Pouring kallisto-0.45.1.mojave.bottle.tar.gz
Warning: kallisto dependency gcc was built with a different C++ standard
library (libstdc++ from clang). This may cause problems at runtime.
🍺 /usr/local/Cellar/kallisto/0.45.1: 5 files, 917.3KB
Removing: /usr/local/Cellar/kallisto/0.45.0... (5 files, 1014.7KB)
==> Upgrading r
==> Installing dependencies for r: libpng, pcre and readline
==> Installing r dependency: libpng
==> Downloading https://homebrew.bintray.com/bottles/libpng-1.6.37.mojave.bottle
==> Downloading from https://akamai.bintray.com/53/53bbd14cc27c86c16605e256e7646
######################################################################## 100.0%
==> Pouring libpng-1.6.37.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/libpng/1.6.37: 27 files, 1.2MB
==> Installing r dependency: pcre
==> Downloading https://homebrew.bintray.com/bottles/pcre-8.43.mojave.bottle.tar
==> Downloading from https://akamai.bintray.com/08/08e7414a7641d1e184c936537ff67
######################################################################## 100.0%
==> Pouring pcre-8.43.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/pcre/8.43: 204 files, 5.5MB
==> Installing r dependency: readline
==> Downloading https://homebrew.bintray.com/bottles/readline-8.0.0_1.mojave.bot
==> Downloading from https://akamai.bintray.com/fa/faab004773e6449dd97971311cb62
######################################################################## 100.0%
==> Pouring readline-8.0.0_1.mojave.bottle.tar.gz
==> Caveats
readline is keg-only, which means it was not symlinked into /usr/local,
because macOS provides the BSD libedit library, which shadows libreadline.
In order to prevent conflicts when programs look for libreadline we are
defaulting this GNU Readline installation to keg-only.
For compilers to find readline you may need to set:
export LDFLAGS="-L/usr/local/opt/readline/lib"
export CPPFLAGS="-I/usr/local/opt/readline/include"
For pkg-config to find readline you may need to set:
export PKG_CONFIG_PATH="/usr/local/opt/readline/lib/pkgconfig"
==> Summary
🍺 /usr/local/Cellar/readline/8.0.0_1: 48 files, 1.5MB
==> Installing r
==> Downloading https://homebrew.bintray.com/bottles/r-3.6.0.mojave.bottle.tar.g
==> Downloading from https://akamai.bintray.com/99/99d04c26f4c4a94b6158e106fd7e6
######################################################################## 100.0%
==> Pouring r-3.6.0.mojave.bottle.tar.gz
Error: The `brew link` step did not complete successfully
The formula built, but is not symlinked into /usr/local
Could not symlink bin/R
Target /usr/local/bin/R
already exists. You may want to remove it:
rm '/usr/local/bin/R'
To force the link and overwrite all conflicting files:
brew link --overwrite r
To list all files that would be deleted:
brew link --overwrite --dry-run r
Possible conflicting files are:
/usr/local/bin/R -> /Library/Frameworks/R.framework/Resources/bin/R
/usr/local/bin/Rscript -> /Library/Frameworks/R.framework/Resources/bin/Rscript
==> Summary
🍺 /usr/local/Cellar/r/3.6.0: 2,121 files, 56.5MB
Removing: /usr/local/Cellar/r/3.5.2_2... (2,117 files, 55.7MB)
==> Caveats
==> readline
readline is keg-only, which means it was not symlinked into /usr/local,
because macOS provides the BSD libedit library, which shadows libreadline.
In order to prevent conflicts when programs look for libreadline we are
defaulting this GNU Readline installation to keg-only.
For compilers to find readline you may need to set:
export LDFLAGS="-L/usr/local/opt/readline/lib"
export CPPFLAGS="-I/usr/local/opt/readline/include"
For pkg-config to find readline you may need to set:
export PKG_CONFIG_PATH="/usr/local/opt/readline/lib/pkgconfig"
(base) wmnd-ibassano:Desktop ibassano$ git clone https://github.com/statgen/demuxlet.git
Cloning into 'demuxlet'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 344 (delta 0), reused 0 (delta 0), pack-reused 340
Receiving objects: 100% (344/344), 6.75 MiB | 8.85 MiB/s, done.
Resolving deltas: 100% (174/174), done.
(base) wmnd-ibassano:Desktop ibassano$ git clone https://github.com/samtools/htslib.git
Cloning into 'htslib'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 10770 (delta 0), reused 1 (delta 0), pack-reused 10766
Receiving objects: 100% (10770/10770), 7.99 MiB | 9.89 MiB/s, done.
Resolving deltas: 100% (7539/7539), done.
(base) wmnd-ibassano:Desktop ibassano$ conda info --envs
# conda environments:
#
base * /anaconda3
BCR_analysis /anaconda3/envs/BCR_analysis
citeseq_tools /anaconda3/envs/citeseq_tools
igdiscover /anaconda3/envs/igdiscover
(base) wmnd-ibassano:Desktop ibassano$ source activate citeseq_tools
(citeseq_tools) wmnd-ibassano:Desktop ibassano$ cd htslib/
(citeseq_tools) wmnd-ibassano:htslib ibassano$ autoheader
(citeseq_tools) wmnd-ibassano:htslib ibassano$ autoconf
(citeseq_tools) wmnd-ibassano:htslib ibassano$ ./configure
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for ranlib... ranlib
checking for grep that handles long lines and -e... /usr/bin/grep
checking for C compiler warning flags... -Wall
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGEFILE_SOURCE value needed for large files... no
checking shared library type for unknown-Darwin... Darwin dylib
checking how to run the C preprocessor... gcc -E
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for gmtime_r... yes
checking for fsync... yes
checking for drand48... yes
checking whether fdatasync is declared... no
checking for library containing log... none required
checking for zlib.h... yes
checking for inflate in -lz... yes
checking for library containing recv... none required
checking for bzlib.h... yes
checking for BZ2_bzBuffToBuffCompress in -lbz2... yes
checking for lzma.h... yes
checking for lzma_easy_buffer_encode in -llzma... yes
checking for libdeflate.h... no
checking for libdeflate_deflate_compress in -ldeflate... no
checking for curl_easy_pause in -lcurl... yes
checking for CCHmac... yes
checking whether PTHREAD_MUTEX_RECURSIVE is declared... yes
configure: creating ./config.status
config.status: creating config.mk
config.status: creating htslib.pc.tmp
config.status: creating config.h
(citeseq_tools) wmnd-ibassano:htslib ibassano$ make
gcc -Wall -g -O2 -I. -c -o kfunc.o kfunc.c
gcc -Wall -g -O2 -I. -c -o knetfile.o knetfile.c
gcc -Wall -g -O2 -I. -c -o kstring.o kstring.c
gcc -Wall -g -O2 -I. -c -o bcf_sr_sort.o bcf_sr_sort.c
gcc -Wall -g -O2 -I. -c -o bgzf.o bgzf.c
gcc -Wall -g -O2 -I. -c -o errmod.o errmod.c
gcc -Wall -g -O2 -I. -c -o faidx.o faidx.c
gcc -Wall -g -O2 -I. -c -o hfile.o hfile.c
gcc -Wall -g -O2 -I. -c -o hfile_net.o hfile_net.c
echo '#define HTS_VERSION "1.9-149-gf5b75ff"' > version.h
gcc -Wall -g -O2 -I. -c -o hts.o hts.c
gcc -Wall -g -O2 -I. -c -o hts_os.o hts_os.c
gcc -Wall -g -O2 -I. -c -o md5.o md5.c
gcc -Wall -g -O2 -I. -c -o multipart.o multipart.c
gcc -Wall -g -O2 -I. -c -o probaln.o probaln.c
gcc -Wall -g -O2 -I. -c -o realn.o realn.c
gcc -Wall -g -O2 -I. -c -o regidx.o regidx.c
gcc -Wall -g -O2 -I. -c -o region.o region.c
gcc -Wall -g -O2 -I. -c -o sam.o sam.c
gcc -Wall -g -O2 -I. -c -o synced_bcf_reader.o synced_bcf_reader.c
gcc -Wall -g -O2 -I. -c -o vcf_sweep.o vcf_sweep.c
gcc -Wall -g -O2 -I. -c -o tbx.o tbx.c
gcc -Wall -g -O2 -I. -c -o textutils.o textutils.c
gcc -Wall -g -O2 -I. -c -o thread_pool.o thread_pool.c
gcc -Wall -g -O2 -I. -c -o vcf.o vcf.c
gcc -Wall -g -O2 -I. -c -o vcfutils.o vcfutils.c
gcc -Wall -g -O2 -I. -c -o cram/cram_codecs.o cram/cram_codecs.c
gcc -Wall -g -O2 -I. -c -o cram/cram_decode.o cram/cram_decode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_encode.o cram/cram_encode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_external.o cram/cram_external.c
gcc -Wall -g -O2 -I. -c -o cram/cram_index.o cram/cram_index.c
gcc -Wall -g -O2 -I. -c -o cram/cram_io.o cram/cram_io.c
gcc -Wall -g -O2 -I. -c -o cram/cram_samtools.o cram/cram_samtools.c
gcc -Wall -g -O2 -I. -c -o cram/cram_stats.o cram/cram_stats.c
gcc -Wall -g -O2 -I. -c -o cram/files.o cram/files.c
gcc -Wall -g -O2 -I. -c -o cram/mFILE.o cram/mFILE.c
gcc -Wall -g -O2 -I. -c -o cram/open_trace_file.o cram/open_trace_file.c
gcc -Wall -g -O2 -I. -c -o cram/pooled_alloc.o cram/pooled_alloc.c
gcc -Wall -g -O2 -I. -c -o cram/rANS_static.o cram/rANS_static.c
gcc -Wall -g -O2 -I. -c -o cram/sam_header.o cram/sam_header.c
gcc -Wall -g -O2 -I. -c -o cram/string_alloc.o cram/string_alloc.c
gcc -Wall -g -O2 -I. -c -o hfile_libcurl.o hfile_libcurl.c
gcc -Wall -g -O2 -I. -c -o hfile_gcs.o hfile_gcs.c
gcc -Wall -g -O2 -I. -c -o hfile_s3.o hfile_s3.c
ar -rc libhts.a kfunc.o knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o faidx.o hfile.o hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o realn.o regidx.o region.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o cram/cram_decode.o cram/cram_encode.o cram/cram_external.o cram/cram_index.o cram/cram_io.o cram/cram_samtools.o cram/cram_stats.o cram/files.o cram/mFILE.o cram/open_trace_file.o cram/pooled_alloc.o cram/rANS_static.o cram/sam_header.o cram/string_alloc.o hfile_libcurl.o hfile_gcs.o hfile_s3.o
ranlib libhts.a
gcc -dynamiclib -install_name /usr/local/lib/libhts.2to3part5.dylib -current_version 1.9.255 -compatibility_version 2.5 -o libhts.dylib kfunc.o knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o faidx.o hfile.o hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o realn.o regidx.o region.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o cram/cram_decode.o cram/cram_encode.o cram/cram_external.o cram/cram_index.o cram/cram_io.o cram/cram_samtools.o cram/cram_stats.o cram/files.o cram/mFILE.o cram/open_trace_file.o cram/pooled_alloc.o cram/rANS_static.o cram/sam_header.o cram/string_alloc.o hfile_libcurl.o hfile_gcs.o hfile_s3.o -llzma -lbz2 -lz -lcurl
ln -sf libhts.dylib libhts.2to3part5.dylib
gcc -Wall -g -O2 -I. -c -o bgzip.o bgzip.c
gcc -o bgzip bgzip.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o htsfile.o htsfile.c
gcc -o htsfile htsfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o tabix.o tabix.c
gcc -o tabix tabix.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/hts_endian.o test/hts_endian.c
gcc -o test/hts_endian test/hts_endian.o -llzma -lbz2 -lz -lcurl
gcc -Wall -g -O2 -I. -c -o test/fieldarith.o test/fieldarith.c
gcc -o test/fieldarith test/fieldarith.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/hfile.o test/hfile.c
gcc -o test/hfile test/hfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/pileup.o test/pileup.c
gcc -pthread -o test/pileup test/pileup.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/sam.o test/sam.c
gcc -o test/sam test/sam.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_bgzf.o test/test_bgzf.c
gcc -o test/test_bgzf test/test_bgzf.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_kstring.o test/test_kstring.c
gcc -o test/test_kstring test/test_kstring.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_realn.o test/test_realn.c
gcc -o test/test_realn test/test_realn.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-regidx.o test/test-regidx.c
gcc -o test/test-regidx test/test-regidx.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_view.o test/test_view.c
gcc -o test/test_view test/test_view.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_index.o test/test_index.c
gcc -o test/test_index test/test_index.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-api.o test/test-vcf-api.c
gcc -o test/test-vcf-api test/test-vcf-api.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-sweep.o test/test-vcf-sweep.c
gcc -o test/test-vcf-sweep test/test-vcf-sweep.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-bcf-sr.o test/test-bcf-sr.c
gcc -o test/test-bcf-sr test/test-bcf-sr.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/fuzz/hts_open_fuzzer.o test/fuzz/hts_open_fuzzer.c
gcc -Wall -g -O2 -I. -c -o test/test-bcf-translate.o test/test-bcf-translate.c
gcc -o test/test-bcf-translate test/test-bcf-translate.o libhts.a -lz -llzma -lbz2 -lz -lcurl -lpthread
(citeseq_tools) wmnd-ibassano:htslib ibassano$ sudo make install
Password:
Sorry, try again.
Password:
mkdir -p -m 755 /usr/local/bin /usr/local/include /usr/local/include/htslib /usr/local/lib /usr/local/share/man/man1 /usr/local/share/man/man5 /usr/local/lib/pkgconfig
if test -n ""; then mkdir -p -m 755 ; fi
install -p libhts.dylib /usr/local/lib/libhts.1.9-149-gf5b75ff.dylib
ln -sf libhts.1.9-149-gf5b75ff.dylib /usr/local/lib/libhts.dylib
ln -sf libhts.1.9-149-gf5b75ff.dylib /usr/local/lib/libhts.2to3part5.dylib
sed -e 's#@-includedir@#/usr/local/include#g;s#@-libdir@#/usr/local/lib#g;s#@-PACKAGE_VERSION@#1.9-149-gf5b75ff#g' htslib.pc.tmp > /usr/local/lib/pkgconfig/htslib.pc
chmod 644 /usr/local/lib/pkgconfig/htslib.pc
install -p bgzip htsfile tabix /usr/local/bin
if test -n ""; then install -p ; fi
install -p -m 644 htslib/*.h /usr/local/include/htslib
install -p -m 644 libhts.a /usr/local/lib/libhts.a
install -p -m 644 bgzip.1 htsfile.1 tabix.1 /usr/local/share/man/man1
install -p -m 644 faidx.5 sam.5 vcf.5 /usr/local/share/man/man5
(citeseq_tools) wmnd-ibassano:htslib ibassano$ cd ../demuxlet/
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: configure.ac: creating directory aux-dist
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'aux-dist'.
glibtoolize: copying file 'aux-dist/ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
glibtoolize: copying file 'm4/libtool.m4'
glibtoolize: copying file 'm4/ltoptions.m4'
glibtoolize: copying file 'm4/ltsugar.m4'
glibtoolize: copying file 'm4/ltversion.m4'
glibtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf --force
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:45: installing 'aux-dist/compile'
configure.ac:45: installing 'aux-dist/config.guess'
configure.ac:45: installing 'aux-dist/config.sub'
configure.ac:7: installing 'aux-dist/install-sh'
configure.ac:7: installing 'aux-dist/missing'
Makefile.am: installing 'aux-dist/depcomp'
autoreconf: Leaving directory `.'
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... aux-dist/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for inline... inline
checking for int32_t... yes
checking for int64_t... yes
checking for C/C++ restrict keyword... __restrict
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for ptrdiff_t... yes
checking for error_at_line... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking whether sys/types.h defines makedev... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for working strtod... yes
checking for floor... yes
checking for gethostname... yes
checking for memset... yes
checking for pow... yes
checking for select... yes
checking for sqrt... yes
checking for strchr... yes
checking for strstr... yes
checking for strtol... yes
checking for gzopen in -lz... yes
checking for erf in -lm... yes
checking for erfc in -lm... yes
checking build system type... x86_64-apple-darwin18.5.0
checking host system type... x86_64-apple-darwin18.5.0
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking how to convert x86_64-apple-darwin18.5.0 file names to x86_64-apple-darwin18.5.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin18.5.0 file names to toolchain format... func_convert_file_noop
checking for /Library/Developer/CommandLineTools/usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is GNU ld... no
checking whether the g++ linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
autoreconf: configure.ac: tracing
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'aux-dist'.
glibtoolize: copying file 'aux-dist/ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
glibtoolize: copying file 'm4/libtool.m4'
glibtoolize: copying file 'm4/ltoptions.m4'
glibtoolize: copying file 'm4/ltsugar.m4'
glibtoolize: copying file 'm4/ltversion.m4'
glibtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf --force
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:45: installing 'aux-dist/compile'
configure.ac:7: installing 'aux-dist/missing'
Makefile.am: installing 'aux-dist/depcomp'
autoreconf: Leaving directory `.'
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... aux-dist/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for inline... inline
checking for int32_t... yes
checking for int64_t... yes
checking for C/C++ restrict keyword... __restrict
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for ptrdiff_t... yes
checking for error_at_line... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking whether sys/types.h defines makedev... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for working strtod... yes
checking for floor... yes
checking for gethostname... yes
checking for memset... yes
checking for pow... yes
checking for select... yes
checking for sqrt... yes
checking for strchr... yes
checking for strstr... yes
checking for strtol... yes
checking for gzopen in -lz... yes
checking for erf in -lm... yes
checking for erfc in -lm... yes
checking build system type... x86_64-apple-darwin18.5.0
checking host system type... x86_64-apple-darwin18.5.0
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking how to convert x86_64-apple-darwin18.5.0 file names to x86_64-apple-darwin18.5.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin18.5.0 file names to toolchain format... func_convert_file_noop
checking for /Library/Developer/CommandLineTools/usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is GNU ld... no
checking whether the g++ linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/Library/Developer/CommandLineTools/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ make
/Library/Developer/CommandLineTools/usr/bin/make all-am
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT Error.o -MD -MP -MF .deps/Error.Tpo -c -o Error.o Error.cpp
mv -f .deps/Error.Tpo .deps/Error.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT PhredHelper.o -MD -MP -MF .deps/PhredHelper.Tpo -c -o PhredHelper.o PhredHelper.cpp
mv -f .deps/PhredHelper.Tpo .deps/PhredHelper.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT params.o -MD -MP -MF .deps/params.Tpo -c -o params.o params.cpp
params.cpp:77:14: warning: format string is not a string literal (potentially insecure)
[-Wformat-security]
::printf(buf);
^~~
params.cpp:77:14: note: treat the string as an argument to avoid this
::printf(buf);
^
"%s",
1 warning generated.
mv -f .deps/params.Tpo .deps/params.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT hts_utils.o -MD -MP -MF .deps/hts_utils.Tpo -c -o hts_utils.o hts_utils.cpp
mv -f .deps/hts_utils.Tpo .deps/hts_utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT bcf_ordered_reader.o -MD -MP -MF .deps/bcf_ordered_reader.Tpo -c -o bcf_ordered_reader.o bcf_ordered_reader.cpp
mv -f .deps/bcf_ordered_reader.Tpo .deps/bcf_ordered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT interval.o -MD -MP -MF .deps/interval.Tpo -c -o interval.o interval.cpp
mv -f .deps/interval.Tpo .deps/interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT interval_tree.o -MD -MP -MF .deps/interval_tree.Tpo -c -o interval_tree.o interval_tree.cpp
mv -f .deps/interval_tree.Tpo .deps/interval_tree.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT utils.o -MD -MP -MF .deps/utils.Tpo -c -o utils.o utils.cpp
mv -f .deps/utils.Tpo .deps/utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT genome_interval.o -MD -MP -MF .deps/genome_interval.Tpo -c -o genome_interval.o genome_interval.cpp
mv -f .deps/genome_interval.Tpo .deps/genome_interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT reference_sequence.o -MD -MP -MF .deps/reference_sequence.Tpo -c -o reference_sequence.o reference_sequence.cpp
mv -f .deps/reference_sequence.Tpo .deps/reference_sequence.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT bcf_chunked_reader.o -MD -MP -MF .deps/bcf_chunked_reader.Tpo -c -o bcf_chunked_reader.o bcf_chunked_reader.cpp
mv -f .deps/bcf_chunked_reader.Tpo .deps/bcf_chunked_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT genomeChunk.o -MD -MP -MF .deps/genomeChunk.Tpo -c -o genomeChunk.o genomeChunk.cpp
mv -f .deps/genomeChunk.Tpo .deps/genomeChunk.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT sam_filtered_reader.o -MD -MP -MF .deps/sam_filtered_reader.Tpo -c -o sam_filtered_reader.o sam_filtered_reader.cpp
mv -f .deps/sam_filtered_reader.Tpo .deps/sam_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT sc_drop_seq.o -MD -MP -MF .deps/sc_drop_seq.Tpo -c -o sc_drop_seq.o sc_drop_seq.cpp
mv -f .deps/sc_drop_seq.Tpo .deps/sc_drop_seq.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT bcf_filtered_reader.o -MD -MP -MF .deps/bcf_filtered_reader.Tpo -c -o bcf_filtered_reader.o bcf_filtered_reader.cpp
mv -f .deps/bcf_filtered_reader.Tpo .deps/bcf_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT filter.o -MD -MP -MF .deps/filter.Tpo -c -o filter.o filter.cpp
filter.cpp:1637:23: warning: variable 'ival' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival = ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1639:22: note: uninitialized use occurs here
if ( out[ival].tok_type!=TOK_VAL || !out[ival].key )
^~~~
filter.cpp:1637:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival = ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1631:31: note: initialize the variable 'ival' to silence this warning
int itok = i, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'ival' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1617:34: note: uninitialized use occurs here
if ( !strcasecmp(out[ival].key,"snp") || !strcasecmp(out[ival].key,"snps") ) { ...
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
...if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:27: note: initialize the variable 'ival' to silence this warning
int itok, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'itok' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1623:22: note: uninitialized use occurs here
if ( out[itok].tok_type==TOK_LIKE || out[itok].tok_type==TOK_NLIKE ) out[itok]....
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
...if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok = i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:21: note: initialize the variable 'itok' to silence this warning
int itok, ival;
^
= 0
3 warnings generated.
mv -f .deps/filter.Tpo .deps/filter.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o tsv_reader.o tsv_reader.cpp
mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT cmd_cram_demuxlet.o -MD -MP -MF .deps/cmd_cram_demuxlet.Tpo -c -o cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp
mv -f .deps/cmd_cram_demuxlet.Tpo .deps/cmd_cram_demuxlet.Po
/bin/sh ./libtool --tag=CXX --mode=link g++ -g -O2 -o demuxlet Error.o PhredHelper.o params.o hts_utils.o bcf_ordered_reader.o interval.o interval_tree.o utils.o genome_interval.o reference_sequence.o bcf_chunked_reader.o genomeChunk.o sam_filtered_reader.o sc_drop_seq.o bcf_filtered_reader.o filter.o tsv_reader.o cmd_cram_demuxlet.o ../htslib/libhts.a -lpthread -llzma -lz -lbz2 -lgomp -lcurl -lcrypto -lz
libtool: link: g++ -g -O2 -o demuxlet Error.o PhredHelper.o params.o hts_utils.o bcf_ordered_reader.o interval.o interval_tree.o utils.o genome_interval.o reference_sequence.o bcf_chunked_reader.o genomeChunk.o sam_filtered_reader.o sc_drop_seq.o bcf_filtered_reader.o filter.o tsv_reader.o cmd_cram_demuxlet.o -Wl,-bind_at_load ../htslib/libhts.a -lpthread -llzma -lbz2 -lgomp -lcurl -lcrypto -lz
ld: library not found for -lgomp
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[1]: *** [demuxlet] Error 1
make: *** [all] Error 2
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$
|
|
You need to install openmp library or remove -lgomp from the Makefile.
-----------------------------------------------------
Hyun Min Kang, Ph.D.
Associate Professor of Biostatistics
University of Michigan, Ann Arbor
Email : hmkang@umich.edu
…On Mon, Apr 29, 2019 at 8:53 AM ibseq ***@***.***> wrote:
Hi Hyun,
I did all the below. See attached. I also upgraded gcc at is seemed the
prob but still nothing
BW
Irene
> On 29 Apr 2019, at 13:37, Hyun Min Kang ***@***.***>
wrote:
>
> Also, rename htslib as Desktop/htslib, for example.
>
> Hyun.
> -----------------------------------------------------
> Hyun Min Kang, Ph.D.
> Associate Professor of Biostatistics
> University of Michigan, Ann Arbor
> Email : ***@***.***
>
>
> On Mon, Apr 29, 2019 at 8:04 AM Hyun Min Kang ***@***.***> wrote:
>
> > You need to have demuxlet as a sibling directory to htslib, for example
> > Desktop/demuxlet.
> >
> > Hyun.
> > -----------------------------------------------------
> > Hyun Min Kang, Ph.D.
> > Associate Professor of Biostatistics
> > University of Michigan, Ann Arbor
> > Email : ***@***.***
> >
> >
> > On Mon, Apr 29, 2019 at 4:58 AM ibseq ***@***.***>
wrote:
> >
> >> Hi Hyun,
> >> The first two work, the last doesn’t
> >>
> >> Just to make sure I understood:
> >> I cloned htslib first and follow instruction to install it.
> >> In the same folder I cloned demuxlet, cd to demuxlet and installed it.
> >>
> >> Correct?
> >>
> >> About :
> >> “The compiler says libhts.a does not exist, but do you see them exist?
> >> That
> >> was my question. If so, what is the directory structure?”
> >>
> >> I opend the htslib folder and a file named “/libhts.a” is found in
> >> Desktop/htslib-1.9/libhts.a
> >>
> >> Demuxlet is found in Desktop/htslib-1.9/demuxlet
> >>
> >> Bw
> >> Irene
> >>
> >> > On 26 Apr 2019, at 16:07, Hyun Min Kang ***@***.***>
> >> wrote:
> >> >
> >> > I believe that this is because htslib.a does not exist in the proper
> >> place,
> >> > as the error message shows.
> >> >
> >> > Go to the parent folder of demuxlet and try if all three commands
works
> >> > $ ls demuxlet/
> >> > $ ls htslib/
> >> > $ ls htslib/libhts.a
> >> >
> >> > If all three commands works without errors, please let me know what
the
> >> > output is.
> >> >
> >> > Hyun.
> >> > -----------------------------------------------------
> >> > Hyun Min Kang, Ph.D.
> >> > Associate Professor of Biostatistics
> >> > University of Michigan, Ann Arbor
> >> > Email : ***@***.***
> >> >
> >> >
> >> > On Fri, Apr 26, 2019 at 10:46 AM ibseq ***@***.***>
> >> wrote:
> >> >
> >> > > is anyone going to pick this up ??...having the same issue :)
> >> > >
> >> > > —
> >> > > You are receiving this because you commented.
> >> > > Reply to this email directly, view it on GitHub
> >> > > <
#40 (comment)
> >> >,
> >> > > or mute the thread
> >> > > <
> >>
https://github.com/notifications/unsubscribe-auth/ABPY5OIS25GXQ5FBRYUAQQ3PSMIUVANCNFSM4G6QX6UQ
> >> >
> >> > > .
> >> > >
> >> > —
> >> > You are receiving this because you commented.
> >> > Reply to this email directly, view it on GitHub <
> >> #40 (comment)
>,
> >> or mute the thread <
> >>
https://github.com/notifications/unsubscribe-auth/AH76DQ6LO75W2LAENK6ZBEDPSMLEFANCNFSM4G6QX6UQ
> >> >.
> >> >
> >>
> >> —
> >> You are receiving this because you commented.
> >> Reply to this email directly, view it on GitHub
> >> <#40 (comment)
>,
> >> or mute the thread
> >> <
https://github.com/notifications/unsubscribe-auth/ABPY5OML3LGT6CEUJP5MJHTPS22DDANCNFSM4G6QX6UQ
>
> >> .
> >>
> >
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub <
#40 (comment)>, or
mute the thread <
https://github.com/notifications/unsubscribe-auth/AH76DQZTKBWOXKW37EO47VLPS3TYRANCNFSM4G6QX6UQ
>.
>
Last login: Mon Apr 29 13:14:52 on ttys004
(base) wmnd-ibassano:~ ibassano$ cd Desktop/
(base) wmnd-ibassano:Desktop ibassano$ brew install gcc
Updating Homebrew...
==> Auto-updated Homebrew!
Updated 2 taps (homebrew/core and homebrew/cask).
==> Updated Formulae
r ✔ golang-migrate neovim
readline ✔ gradle netdata
argyll-cms grpc opencoarrays
badtouch iamy pcapplusplus
ballerina ***@***.*** pdnsrec
binaryen ipython quazip
buildkit istioctl shfmt
ccache kubeprod silk
cmocka libcoap skaffold
erlang libfixbuf swiftlint
exploitdb libiconv traefik
faas-cli libjson-rpc-cpp typescript
flatbuffers liblinear volt
flow libxo webdis
fn lmod wtf
gel mysql yaf
ghq nats-streaming-server you-get
Error: gcc 8.2.0 is already installed
To upgrade to 8.3.0_2, run `brew upgrade gcc`.
(base) wmnd-ibassano:Desktop ibassano$ brew upgrade gcc
==> Upgrading 1 outdated package:
gcc 8.2.0 -> 8.3.0_2
==> Upgrading gcc
==> Installing dependencies for gcc: isl and mpfr
==> Installing gcc dependency: isl
==> Downloading
https://homebrew.bintray.com/bottles/isl-0.21.mojave.bottle.tar.
==> Downloading from
https://akamai.bintray.com/f9/f9188b5d486b2a835cd865f219be1
########################################################################
100.0%
==> Pouring isl-0.21.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/isl/0.21: 72 files, 4.3MB
==> Installing gcc dependency: mpfr
==> Downloading
https://homebrew.bintray.com/bottles/mpfr-4.0.2.mojave.bottle.ta
==> Downloading from
https://akamai.bintray.com/cf/cfce7ab866e98360c9364cd924da6
########################################################################
100.0%
==> Pouring mpfr-4.0.2.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/mpfr/4.0.2: 28 files, 4.7MB
==> Installing gcc
==> Downloading
https://homebrew.bintray.com/bottles/gcc-8.3.0_2.mojave.bottle.t
==> Downloading from
https://akamai.bintray.com/78/78b5b3a98b82f7c89263c5d972a11
########################################################################
100.0%
==> Pouring gcc-8.3.0_2.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/gcc/8.3.0_2: 1,414 files, 288.5MB
Removing: /usr/local/Cellar/gcc/8.2.0... (1,413 files, 295.9MB)
==> Upgrading 3 dependents:
hdf5 1.10.4 -> 1.10.5, kallisto 0.45.0 -> 0.45.1, r 3.5.2_2 -> 3.6.0
==> Upgrading hdf5
==> Downloading
https://homebrew.bintray.com/bottles/hdf5-1.10.5.mojave.bottle.t
==> Downloading from
https://akamai.bintray.com/6d/6dc444fd95265b221047a69348d7a
########################################################################
100.0%
==> Pouring hdf5-1.10.5.mojave.bottle.tar.gz
Warning: hdf5 dependency gcc was built with a different C++ standard
library (libstdc++ from clang). This may cause problems at runtime.
🍺 /usr/local/Cellar/hdf5/1.10.5: 256 files, 14.7MB
Removing: /usr/local/Cellar/hdf5/1.10.4... (262 files, 14.8MB)
==> Upgrading kallisto
==> Downloading
https://homebrew.bintray.com/bottles/kallisto-0.45.1.mojave.bott
==> Downloading from
https://akamai.bintray.com/60/60b4b2ac31be396caaf7a07d403be
########################################################################
100.0%
==> Pouring kallisto-0.45.1.mojave.bottle.tar.gz
Warning: kallisto dependency gcc was built with a different C++ standard
library (libstdc++ from clang). This may cause problems at runtime.
🍺 /usr/local/Cellar/kallisto/0.45.1: 5 files, 917.3KB
Removing: /usr/local/Cellar/kallisto/0.45.0... (5 files, 1014.7KB)
==> Upgrading r
==> Installing dependencies for r: libpng, pcre and readline
==> Installing r dependency: libpng
==> Downloading
https://homebrew.bintray.com/bottles/libpng-1.6.37.mojave.bottle
==> Downloading from
https://akamai.bintray.com/53/53bbd14cc27c86c16605e256e7646
########################################################################
100.0%
==> Pouring libpng-1.6.37.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/libpng/1.6.37: 27 files, 1.2MB
==> Installing r dependency: pcre
==> Downloading
https://homebrew.bintray.com/bottles/pcre-8.43.mojave.bottle.tar
==> Downloading from
https://akamai.bintray.com/08/08e7414a7641d1e184c936537ff67
########################################################################
100.0%
==> Pouring pcre-8.43.mojave.bottle.tar.gz
🍺 /usr/local/Cellar/pcre/8.43: 204 files, 5.5MB
==> Installing r dependency: readline
==> Downloading
https://homebrew.bintray.com/bottles/readline-8.0.0_1.mojave.bot
==> Downloading from
https://akamai.bintray.com/fa/faab004773e6449dd97971311cb62
########################################################################
100.0%
==> Pouring readline-8.0.0_1.mojave.bottle.tar.gz
==> Caveats
readline is keg-only, which means it was not symlinked into /usr/local,
because macOS provides the BSD libedit library, which shadows libreadline.
In order to prevent conflicts when programs look for libreadline we are
defaulting this GNU Readline installation to keg-only.
For compilers to find readline you may need to set:
export LDFLAGS="-L/usr/local/opt/readline/lib"
export CPPFLAGS="-I/usr/local/opt/readline/include"
For pkg-config to find readline you may need to set:
export PKG_CONFIG_PATH="/usr/local/opt/readline/lib/pkgconfig"
==> Summary
🍺 /usr/local/Cellar/readline/8.0.0_1: 48 files, 1.5MB
==> Installing r
==> Downloading
https://homebrew.bintray.com/bottles/r-3.6.0.mojave.bottle.tar.g
==> Downloading from
https://akamai.bintray.com/99/99d04c26f4c4a94b6158e106fd7e6
########################################################################
100.0%
==> Pouring r-3.6.0.mojave.bottle.tar.gz
Error: The `brew link` step did not complete successfully
The formula built, but is not symlinked into /usr/local
Could not symlink bin/R
Target /usr/local/bin/R
already exists. You may want to remove it:
rm '/usr/local/bin/R'
To force the link and overwrite all conflicting files:
brew link --overwrite r
To list all files that would be deleted:
brew link --overwrite --dry-run r
Possible conflicting files are:
/usr/local/bin/R -> /Library/Frameworks/R.framework/Resources/bin/R
/usr/local/bin/Rscript ->
/Library/Frameworks/R.framework/Resources/bin/Rscript
==> Summary
🍺 /usr/local/Cellar/r/3.6.0: 2,121 files, 56.5MB
Removing: /usr/local/Cellar/r/3.5.2_2... (2,117 files, 55.7MB)
==> Caveats
==> readline
readline is keg-only, which means it was not symlinked into /usr/local,
because macOS provides the BSD libedit library, which shadows libreadline.
In order to prevent conflicts when programs look for libreadline we are
defaulting this GNU Readline installation to keg-only.
For compilers to find readline you may need to set:
export LDFLAGS="-L/usr/local/opt/readline/lib"
export CPPFLAGS="-I/usr/local/opt/readline/include"
For pkg-config to find readline you may need to set:
export PKG_CONFIG_PATH="/usr/local/opt/readline/lib/pkgconfig"
(base) wmnd-ibassano:Desktop ibassano$ git clone
https://github.com/statgen/demuxlet.git
Cloning into 'demuxlet'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 344 (delta 0), reused 0 (delta 0), pack-reused 340
Receiving objects: 100% (344/344), 6.75 MiB | 8.85 MiB/s, done.
Resolving deltas: 100% (174/174), done.
(base) wmnd-ibassano:Desktop ibassano$ git clone
https://github.com/samtools/htslib.git
Cloning into 'htslib'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 10770 (delta 0), reused 1 (delta 0), pack-reused 10766
Receiving objects: 100% (10770/10770), 7.99 MiB | 9.89 MiB/s, done.
Resolving deltas: 100% (7539/7539), done.
(base) wmnd-ibassano:Desktop ibassano$ conda info --envs
# conda environments:
#
base * /anaconda3
BCR_analysis /anaconda3/envs/BCR_analysis
citeseq_tools /anaconda3/envs/citeseq_tools
igdiscover /anaconda3/envs/igdiscover
(base) wmnd-ibassano:Desktop ibassano$ source activate citeseq_tools
(citeseq_tools) wmnd-ibassano:Desktop ibassano$ cd htslib/
(citeseq_tools) wmnd-ibassano:htslib ibassano$ autoheader
(citeseq_tools) wmnd-ibassano:htslib ibassano$ autoconf
(citeseq_tools) wmnd-ibassano:htslib ibassano$ ./configure
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for ranlib... ranlib
checking for grep that handles long lines and -e... /usr/bin/grep
checking for C compiler warning flags... -Wall
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGEFILE_SOURCE value needed for large files... no
checking shared library type for unknown-Darwin... Darwin dylib
checking how to run the C preprocessor... gcc -E
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for gmtime_r... yes
checking for fsync... yes
checking for drand48... yes
checking whether fdatasync is declared... no
checking for library containing log... none required
checking for zlib.h... yes
checking for inflate in -lz... yes
checking for library containing recv... none required
checking for bzlib.h... yes
checking for BZ2_bzBuffToBuffCompress in -lbz2... yes
checking for lzma.h... yes
checking for lzma_easy_buffer_encode in -llzma... yes
checking for libdeflate.h... no
checking for libdeflate_deflate_compress in -ldeflate... no
checking for curl_easy_pause in -lcurl... yes
checking for CCHmac... yes
checking whether PTHREAD_MUTEX_RECURSIVE is declared... yes
configure: creating ./config.status
config.status: creating config.mk
config.status: creating htslib.pc.tmp
config.status: creating config.h
(citeseq_tools) wmnd-ibassano:htslib ibassano$ make
gcc -Wall -g -O2 -I. -c -o kfunc.o kfunc.c
gcc -Wall -g -O2 -I. -c -o knetfile.o knetfile.c
gcc -Wall -g -O2 -I. -c -o kstring.o kstring.c
gcc -Wall -g -O2 -I. -c -o bcf_sr_sort.o bcf_sr_sort.c
gcc -Wall -g -O2 -I. -c -o bgzf.o bgzf.c
gcc -Wall -g -O2 -I. -c -o errmod.o errmod.c
gcc -Wall -g -O2 -I. -c -o faidx.o faidx.c
gcc -Wall -g -O2 -I. -c -o hfile.o hfile.c
gcc -Wall -g -O2 -I. -c -o hfile_net.o hfile_net.c
echo '#define HTS_VERSION "1.9-149-gf5b75ff"' > version.h
gcc -Wall -g -O2 -I. -c -o hts.o hts.c
gcc -Wall -g -O2 -I. -c -o hts_os.o hts_os.c
gcc -Wall -g -O2 -I. -c -o md5.o md5.c
gcc -Wall -g -O2 -I. -c -o multipart.o multipart.c
gcc -Wall -g -O2 -I. -c -o probaln.o probaln.c
gcc -Wall -g -O2 -I. -c -o realn.o realn.c
gcc -Wall -g -O2 -I. -c -o regidx.o regidx.c
gcc -Wall -g -O2 -I. -c -o region.o region.c
gcc -Wall -g -O2 -I. -c -o sam.o sam.c
gcc -Wall -g -O2 -I. -c -o synced_bcf_reader.o synced_bcf_reader.c
gcc -Wall -g -O2 -I. -c -o vcf_sweep.o vcf_sweep.c
gcc -Wall -g -O2 -I. -c -o tbx.o tbx.c
gcc -Wall -g -O2 -I. -c -o textutils.o textutils.c
gcc -Wall -g -O2 -I. -c -o thread_pool.o thread_pool.c
gcc -Wall -g -O2 -I. -c -o vcf.o vcf.c
gcc -Wall -g -O2 -I. -c -o vcfutils.o vcfutils.c
gcc -Wall -g -O2 -I. -c -o cram/cram_codecs.o cram/cram_codecs.c
gcc -Wall -g -O2 -I. -c -o cram/cram_decode.o cram/cram_decode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_encode.o cram/cram_encode.c
gcc -Wall -g -O2 -I. -c -o cram/cram_external.o cram/cram_external.c
gcc -Wall -g -O2 -I. -c -o cram/cram_index.o cram/cram_index.c
gcc -Wall -g -O2 -I. -c -o cram/cram_io.o cram/cram_io.c
gcc -Wall -g -O2 -I. -c -o cram/cram_samtools.o cram/cram_samtools.c
gcc -Wall -g -O2 -I. -c -o cram/cram_stats.o cram/cram_stats.c
gcc -Wall -g -O2 -I. -c -o cram/files.o cram/files.c
gcc -Wall -g -O2 -I. -c -o cram/mFILE.o cram/mFILE.c
gcc -Wall -g -O2 -I. -c -o cram/open_trace_file.o cram/open_trace_file.c
gcc -Wall -g -O2 -I. -c -o cram/pooled_alloc.o cram/pooled_alloc.c
gcc -Wall -g -O2 -I. -c -o cram/rANS_static.o cram/rANS_static.c
gcc -Wall -g -O2 -I. -c -o cram/sam_header.o cram/sam_header.c
gcc -Wall -g -O2 -I. -c -o cram/string_alloc.o cram/string_alloc.c
gcc -Wall -g -O2 -I. -c -o hfile_libcurl.o hfile_libcurl.c
gcc -Wall -g -O2 -I. -c -o hfile_gcs.o hfile_gcs.c
gcc -Wall -g -O2 -I. -c -o hfile_s3.o hfile_s3.c
ar -rc libhts.a kfunc.o knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o
faidx.o hfile.o hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o
realn.o regidx.o region.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o
textutils.o thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o
cram/cram_decode.o cram/cram_encode.o cram/cram_external.o
cram/cram_index.o cram/cram_io.o cram/cram_samtools.o cram/cram_stats.o
cram/files.o cram/mFILE.o cram/open_trace_file.o cram/pooled_alloc.o
cram/rANS_static.o cram/sam_header.o cram/string_alloc.o hfile_libcurl.o
hfile_gcs.o hfile_s3.o
ranlib libhts.a
gcc -dynamiclib -install_name /usr/local/lib/libhts.2to3part5.dylib
-current_version 1.9.255 -compatibility_version 2.5 -o libhts.dylib kfunc.o
knetfile.o kstring.o bcf_sr_sort.o bgzf.o errmod.o faidx.o hfile.o
hfile_net.o hts.o hts_os.o md5.o multipart.o probaln.o realn.o regidx.o
region.o sam.o synced_bcf_reader.o vcf_sweep.o tbx.o textutils.o
thread_pool.o vcf.o vcfutils.o cram/cram_codecs.o cram/cram_decode.o
cram/cram_encode.o cram/cram_external.o cram/cram_index.o cram/cram_io.o
cram/cram_samtools.o cram/cram_stats.o cram/files.o cram/mFILE.o
cram/open_trace_file.o cram/pooled_alloc.o cram/rANS_static.o
cram/sam_header.o cram/string_alloc.o hfile_libcurl.o hfile_gcs.o
hfile_s3.o -llzma -lbz2 -lz -lcurl
ln -sf libhts.dylib libhts.2to3part5.dylib
gcc -Wall -g -O2 -I. -c -o bgzip.o bgzip.c
gcc -o bgzip bgzip.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o htsfile.o htsfile.c
gcc -o htsfile htsfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o tabix.o tabix.c
gcc -o tabix tabix.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/hts_endian.o test/hts_endian.c
gcc -o test/hts_endian test/hts_endian.o -llzma -lbz2 -lz -lcurl
gcc -Wall -g -O2 -I. -c -o test/fieldarith.o test/fieldarith.c
gcc -o test/fieldarith test/fieldarith.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/hfile.o test/hfile.c
gcc -o test/hfile test/hfile.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/pileup.o test/pileup.c
gcc -pthread -o test/pileup test/pileup.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/sam.o test/sam.c
gcc -o test/sam test/sam.o libhts.a -llzma -lbz2 -lz -lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_bgzf.o test/test_bgzf.c
gcc -o test/test_bgzf test/test_bgzf.o libhts.a -lz -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_kstring.o test/test_kstring.c
gcc -o test/test_kstring test/test_kstring.o libhts.a -lz -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_realn.o test/test_realn.c
gcc -o test/test_realn test/test_realn.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/test-regidx.o test/test-regidx.c
gcc -o test/test-regidx test/test-regidx.o libhts.a -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test_view.o test/test_view.c
gcc -o test/test_view test/test_view.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/test_index.o test/test_index.c
gcc -o test/test_index test/test_index.o libhts.a -llzma -lbz2 -lz -lcurl
-lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-api.o test/test-vcf-api.c
gcc -o test/test-vcf-api test/test-vcf-api.o libhts.a -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-vcf-sweep.o test/test-vcf-sweep.c
gcc -o test/test-vcf-sweep test/test-vcf-sweep.o libhts.a -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/test-bcf-sr.o test/test-bcf-sr.c
gcc -o test/test-bcf-sr test/test-bcf-sr.o libhts.a -lz -llzma -lbz2 -lz
-lcurl -lpthread
gcc -Wall -g -O2 -I. -c -o test/fuzz/hts_open_fuzzer.o
test/fuzz/hts_open_fuzzer.c
gcc -Wall -g -O2 -I. -c -o test/test-bcf-translate.o
test/test-bcf-translate.c
gcc -o test/test-bcf-translate test/test-bcf-translate.o libhts.a -lz
-llzma -lbz2 -lz -lcurl -lpthread
(citeseq_tools) wmnd-ibassano:htslib ibassano$ sudo make install
Password:
Sorry, try again.
Password:
mkdir -p -m 755 /usr/local/bin /usr/local/include
/usr/local/include/htslib /usr/local/lib /usr/local/share/man/man1
/usr/local/share/man/man5 /usr/local/lib/pkgconfig
if test -n ""; then mkdir -p -m 755 ; fi
install -p libhts.dylib /usr/local/lib/libhts.1.9-149-gf5b75ff.dylib
ln -sf libhts.1.9-149-gf5b75ff.dylib /usr/local/lib/libhts.dylib
ln -sf libhts.1.9-149-gf5b75ff.dylib /usr/local/lib/libhts.2to3part5.dylib
sed -e ***@***.***@***@***.***@
***@***.***_VERSION@#1.9-149-gf5b75ff#g' htslib.pc.tmp
> /usr/local/lib/pkgconfig/htslib.pc
chmod 644 /usr/local/lib/pkgconfig/htslib.pc
install -p bgzip htsfile tabix /usr/local/bin
if test -n ""; then install -p ; fi
install -p -m 644 htslib/*.h /usr/local/include/htslib
install -p -m 644 libhts.a /usr/local/lib/libhts.a
install -p -m 644 bgzip.1 htsfile.1 tabix.1 /usr/local/share/man/man1
install -p -m 644 faidx.5 sam.5 vcf.5 /usr/local/share/man/man5
(citeseq_tools) wmnd-ibassano:htslib ibassano$ cd ../demuxlet/
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: configure.ac: creating directory aux-dist
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'aux-dist'.
glibtoolize: copying file 'aux-dist/ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
glibtoolize: copying file 'm4/libtool.m4'
glibtoolize: copying file 'm4/ltoptions.m4'
glibtoolize: copying file 'm4/ltsugar.m4'
glibtoolize: copying file 'm4/ltversion.m4'
glibtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf --force
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:45: installing 'aux-dist/compile'
configure.ac:45: installing 'aux-dist/config.guess'
configure.ac:45: installing 'aux-dist/config.sub'
configure.ac:7: installing 'aux-dist/install-sh'
configure.ac:7: installing 'aux-dist/missing'
Makefile.am: installing 'aux-dist/depcomp'
autoreconf: Leaving directory `.'
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... aux-dist/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for inline... inline
checking for int32_t... yes
checking for int64_t... yes
checking for C/C++ restrict keyword... __restrict
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for ptrdiff_t... yes
checking for error_at_line... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking whether sys/types.h defines makedev... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for working strtod... yes
checking for floor... yes
checking for gethostname... yes
checking for memset... yes
checking for pow... yes
checking for select... yes
checking for sqrt... yes
checking for strchr... yes
checking for strstr... yes
checking for strtol... yes
checking for gzopen in -lz... yes
checking for erf in -lm... yes
checking for erfc in -lm... yes
checking build system type... x86_64-apple-darwin18.5.0
checking host system type... x86_64-apple-darwin18.5.0
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc...
/Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is
GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking how to convert x86_64-apple-darwin18.5.0 file names to
x86_64-apple-darwin18.5.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin18.5.0 file names to toolchain
format... func_convert_file_noop
checking for /Library/Developer/CommandLineTools/usr/bin/ld option to
reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++...
/Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is
GNU ld... no
checking whether the g++ linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ autoreconf -vfi
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
autoreconf: configure.ac: tracing
autoreconf: running: glibtoolize --copy --force
glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'aux-dist'.
glibtoolize: copying file 'aux-dist/ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
glibtoolize: copying file 'm4/libtool.m4'
glibtoolize: copying file 'm4/ltoptions.m4'
glibtoolize: copying file 'm4/ltsugar.m4'
glibtoolize: copying file 'm4/ltversion.m4'
glibtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf --force
autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:45: installing 'aux-dist/compile'
configure.ac:7: installing 'aux-dist/missing'
Makefile.am: installing 'aux-dist/depcomp'
autoreconf: Leaving directory `.'
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... aux-dist/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... no
checking for _Bool... no
checking for inline... inline
checking for int32_t... yes
checking for int64_t... yes
checking for C/C++ restrict keyword... __restrict
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for ptrdiff_t... yes
checking for error_at_line... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking whether sys/types.h defines makedev... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for working strtod... yes
checking for floor... yes
checking for gethostname... yes
checking for memset... yes
checking for pow... yes
checking for select... yes
checking for sqrt... yes
checking for strchr... yes
checking for strstr... yes
checking for strtol... yes
checking for gzopen in -lz... yes
checking for erf in -lm... yes
checking for erfc in -lm... yes
checking build system type... x86_64-apple-darwin18.5.0
checking host system type... x86_64-apple-darwin18.5.0
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc...
/Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is
GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 196608
checking how to convert x86_64-apple-darwin18.5.0 file names to
x86_64-apple-darwin18.5.0 format... func_convert_file_noop
checking how to convert x86_64-apple-darwin18.5.0 file names to toolchain
format... func_convert_file_noop
checking for /Library/Developer/CommandLineTools/usr/bin/ld option to
reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... no
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dsymutil... dsymutil
checking for nmedit... nmedit
checking for lipo... lipo
checking for otool... otool
checking for otool64... no
checking for -single_module linker flag... yes
checking for -exported_symbols_list linker flag... yes
checking for -force_load linker flag... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fno-common -DPIC
checking if gcc PIC flag -fno-common -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++...
/Library/Developer/CommandLineTools/usr/bin/ld
checking if the linker (/Library/Developer/CommandLineTools/usr/bin/ld) is
GNU ld... no
checking whether the g++ linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking for g++ option to produce PIC... -fno-common -DPIC
checking if g++ PIC flag -fno-common -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker
(/Library/Developer/CommandLineTools/usr/bin/ld) supports shared
libraries... yes
checking dynamic linker characteristics... darwin18.5.0 dyld
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$ make
/Library/Developer/CommandLineTools/usr/bin/make all-am
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT Error.o -MD -MP -MF .deps/Error.Tpo -c -o Error.o
Error.cpp
mv -f .deps/Error.Tpo .deps/Error.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT PhredHelper.o -MD -MP -MF .deps/PhredHelper.Tpo -c -o
PhredHelper.o PhredHelper.cpp
mv -f .deps/PhredHelper.Tpo .deps/PhredHelper.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT params.o -MD -MP -MF .deps/params.Tpo -c -o params.o
params.cpp
params.cpp:77:14: warning: format string is not a string literal
(potentially insecure)
[-Wformat-security]
::printf(buf);
^~~
params.cpp:77:14: note: treat the string as an argument to avoid this
::printf(buf);
^
"%s",
1 warning generated.
mv -f .deps/params.Tpo .deps/params.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT hts_utils.o -MD -MP -MF .deps/hts_utils.Tpo -c -o
hts_utils.o hts_utils.cpp
mv -f .deps/hts_utils.Tpo .deps/hts_utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT bcf_ordered_reader.o -MD -MP -MF
.deps/bcf_ordered_reader.Tpo -c -o bcf_ordered_reader.o
bcf_ordered_reader.cpp
mv -f .deps/bcf_ordered_reader.Tpo .deps/bcf_ordered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT interval.o -MD -MP -MF .deps/interval.Tpo -c -o
interval.o interval.cpp
mv -f .deps/interval.Tpo .deps/interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT interval_tree.o -MD -MP -MF .deps/interval_tree.Tpo -c
-o interval_tree.o interval_tree.cpp
mv -f .deps/interval_tree.Tpo .deps/interval_tree.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT utils.o -MD -MP -MF .deps/utils.Tpo -c -o utils.o
utils.cpp
mv -f .deps/utils.Tpo .deps/utils.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT genome_interval.o -MD -MP -MF
.deps/genome_interval.Tpo -c -o genome_interval.o genome_interval.cpp
mv -f .deps/genome_interval.Tpo .deps/genome_interval.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT reference_sequence.o -MD -MP -MF
.deps/reference_sequence.Tpo -c -o reference_sequence.o
reference_sequence.cpp
mv -f .deps/reference_sequence.Tpo .deps/reference_sequence.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT bcf_chunked_reader.o -MD -MP -MF
.deps/bcf_chunked_reader.Tpo -c -o bcf_chunked_reader.o
bcf_chunked_reader.cpp
mv -f .deps/bcf_chunked_reader.Tpo .deps/bcf_chunked_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT genomeChunk.o -MD -MP -MF .deps/genomeChunk.Tpo -c -o
genomeChunk.o genomeChunk.cpp
mv -f .deps/genomeChunk.Tpo .deps/genomeChunk.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT sam_filtered_reader.o -MD -MP -MF
.deps/sam_filtered_reader.Tpo -c -o sam_filtered_reader.o
sam_filtered_reader.cpp
mv -f .deps/sam_filtered_reader.Tpo .deps/sam_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT sc_drop_seq.o -MD -MP -MF .deps/sc_drop_seq.Tpo -c -o
sc_drop_seq.o sc_drop_seq.cpp
mv -f .deps/sc_drop_seq.Tpo .deps/sc_drop_seq.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT bcf_filtered_reader.o -MD -MP -MF
.deps/bcf_filtered_reader.Tpo -c -o bcf_filtered_reader.o
bcf_filtered_reader.cpp
mv -f .deps/bcf_filtered_reader.Tpo .deps/bcf_filtered_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT filter.o -MD -MP -MF .deps/filter.Tpo -c -o filter.o
filter.cpp
filter.cpp:1637:23: warning: variable 'ival' is used uninitialized
whenever 'if' condition is false
[-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival
= ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1639:22: note: uninitialized use occurs here
if ( out[ival].tok_type!=TOK_VAL || !out[ival].key )
^~~~
filter.cpp:1637:18: note: remove the 'if' if its condition is always true
else if ( out[i+2].tok_type==TOK_NLIKE ) out[i+2].tok_type = TOK_NE, ival
= ++i;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1631:31: note: initialize the variable 'ival' to silence this
warning
int itok = i, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'ival' is used uninitialized
whenever 'if' condition is false
[-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE )
itok = ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1617:34: note: uninitialized use occurs here
if ( !strcasecmp(out[ival].key,"snp") || !strcasecmp(out[ival].key,"snps")
) { ...
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
...if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok
= i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:27: note: initialize the variable 'ival' to silence this
warning
int itok, ival;
^
= 0
filter.cpp:1615:23: warning: variable 'itok' is used uninitialized
whenever 'if' condition is false
[-Wsometimes-uninitialized]
else if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE )
itok = ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
filter.cpp:1623:22: note: uninitialized use occurs here
if ( out[itok].tok_type==TOK_LIKE || out[itok].tok_type==TOK_NLIKE )
out[itok]....
^~~~
filter.cpp:1615:18: note: remove the 'if' if its condition is always true
...if ( out[i+2].tok_type==TOK_LIKE || out[i+2].tok_type==TOK_NLIKE ) itok
= i + 2, ival = i + 1;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~
filter.cpp:1611:21: note: initialize the variable 'itok' to silence this
warning
int itok, ival;
^
= 0
3 warnings generated.
mv -f .deps/filter.Tpo .deps/filter.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o
tsv_reader.o tsv_reader.cpp
mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po
g++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe
-D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare
-fpic -O2 -g -O2 -MT cmd_cram_demuxlet.o -MD -MP -MF
.deps/cmd_cram_demuxlet.Tpo -c -o cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp
mv -f .deps/cmd_cram_demuxlet.Tpo .deps/cmd_cram_demuxlet.Po
/bin/sh ./libtool --tag=CXX --mode=link g++ -g -O2 -o demuxlet Error.o
PhredHelper.o params.o hts_utils.o bcf_ordered_reader.o interval.o
interval_tree.o utils.o genome_interval.o reference_sequence.o
bcf_chunked_reader.o genomeChunk.o sam_filtered_reader.o sc_drop_seq.o
bcf_filtered_reader.o filter.o tsv_reader.o cmd_cram_demuxlet.o
../htslib/libhts.a -lpthread -llzma -lz -lbz2 -lgomp -lcurl -lcrypto -lz
libtool: link: g++ -g -O2 -o demuxlet Error.o PhredHelper.o params.o
hts_utils.o bcf_ordered_reader.o interval.o interval_tree.o utils.o
genome_interval.o reference_sequence.o bcf_chunked_reader.o genomeChunk.o
sam_filtered_reader.o sc_drop_seq.o bcf_filtered_reader.o filter.o
tsv_reader.o cmd_cram_demuxlet.o -Wl,-bind_at_load ../htslib/libhts.a
-lpthread -llzma -lbz2 -lgomp -lcurl -lcrypto -lz
ld: library not found for -lgomp
clang: error: linker command failed with exit code 1 (use -v to see
invocation)
make[1]: *** [demuxlet] Error 1
make: *** [all] Error 2
(citeseq_tools) wmnd-ibassano:demuxlet ibassano$
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#40 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ABPY5OPRL5J7YWCJ55OXMXDPS3VU7ANCNFSM4G6QX6UQ>
.
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello,
I am having some trouble installing Demuxlet on my Mac. I followed the instructions step by step by README2.md and everything was ran fine until I was trying to run $make after I downloaded demuxlet. Here is the error message I got:
3 warnings generated. mv -f .deps/filter.Tpo .deps/filter.Po /usr/local/Cellar/llvm/7.0.1/bin/clang++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT tsv_reader.o -MD -MP -MF .deps/tsv_reader.Tpo -c -o tsv_reader.o tsv_reader.cpp mv -f .deps/tsv_reader.Tpo .deps/tsv_reader.Po /usr/local/Cellar/llvm/7.0.1/bin/clang++ -DHAVE_CONFIG_H -I. -I ../htslib/ -I ../../htslib/htslib -pipe -D__STDC_LIMIT_MACROS -Wall -Wno-unused-local-typedefs -Wno-enum-compare -fpic -O2 -g -O2 -MT cmd_cram_demuxlet.o -MD -MP -MF .deps/cmd_cram_demuxlet.Tpo -c -o cmd_cram_demuxlet.o cmd_cram_demuxlet.cpp mv -f .deps/cmd_cram_demuxlet.Tpo .deps/cmd_cram_demuxlet.Po make[1]: *** No rule to make target../htslib/libhts.a', needed bydemuxlet'. Stop. make: *** [all] Error 2Can someone please help me? Thanks very much!
Siyao
The text was updated successfully, but these errors were encountered: