Usage

Getting Help from the Command Line

Running PHP_CodeSniffer with the -h or --help command line arguments will print a list of commands that PHP_CodeSniffer will respond to. The output of phpcs -h is shown below.

Usage: phpcs [-nwlsaepqvi] [-d key[=value]] [--colors] [--no-colors]
  [--cache[=<cacheFile>]] [--no-cache] [--tab-width=<tabWidth>]
  [--report=<report>] [--report-file=<reportFile>] [--report-<report>=<reportFile>]
  [--report-width=<reportWidth>] [--basepath=<basepath>] [--bootstrap=<bootstrap>]
  [--severity=<severity>] [--error-severity=<severity>] [--warning-severity=<severity>]
  [--runtime-set key value] [--config-set key value] [--config-delete key] [--config-show]
  [--standard=<standard>] [--sniffs=<sniffs>] [--exclude=<sniffs>]
  [--encoding=<encoding>] [--parallel=<processes>] [--generator=<generator>]
  [--extensions=<extensions>] [--ignore=<patterns>] [--ignore-annotations]
  [--stdin-path=<stdinPath>] [--file-list=<fileList>] [--filter=<filter>] <file> - ...

 -     Check STDIN instead of local files and directories
 -n    Do not print warnings (shortcut for --warning-severity=0)
 -w    Print both warnings and errors (this is the default)
 -l    Local directory only, no recursion
 -s    Show sniff codes in all reports
 -a    Run interactively
 -e    Explain a standard by showing the sniffs it includes
 -p    Show progress of the run
 -q    Quiet mode; disables progress and verbose output
 -m    Stop error messages from being recorded
       (saves a lot of memory, but stops many reports from being used)
 -v    Print processed files
 -vv   Print ruleset and token output
 -vvv  Print sniff processing information
 -i    Show a list of installed coding standards
 -d    Set the [key] php.ini value to [value] or [true] if value is omitted

 --help                Print this help message
 --version             Print version information
 --colors              Use colors in output
 --no-colors           Do not use colors in output (this is the default)
 --cache               Cache results between runs
 --no-cache            Do not cache results between runs (this is the default)
 --ignore-annotations  Ignore all phpcs: annotations in code comments

 <cacheFile>    Use a specific file for caching (uses a temporary file by default)
 <basepath>     A path to strip from the front of file paths inside reports
 <bootstrap>    A comma separated list of files to run before processing begins
 <encoding>     The encoding of the files being checked (default is utf-8)
 <extensions>   A comma separated list of file extensions to check
                The type of the file can be specified using: ext/type
                e.g., module/php,es/js
 <file>         One or more files and/or directories to check
 <fileList>     A file containing a list of files and/or directories to check (one per line)
 <filter>       Use either the "GitModified" or "GitStaged" filter,
                or specify the path to a custom filter class
 <generator>    Use either the "HTML", "Markdown" or "Text" generator
                (forces documentation generation instead of checking)
 <patterns>     A comma separated list of patterns to ignore files and directories
 <processes>    How many files should be checked simultaneously (default is 1)
 <report>       Print either the "full", "xml", "checkstyle", "csv"
                "json", "junit", "emacs", "source", "summary", "diff"
                "svnblame", "gitblame", "hgblame" or "notifysend" report,
                or specify the path to a custom report class
                (the "full" report is printed by default)
 <reportFile>   Write the report to the specified file path
 <reportWidth>  How many columns wide screen reports should be printed
                or set to "auto" to use current screen width, where supported
 <severity>     The minimum severity required to display an error or warning
 <sniffs>       A comma separated list of sniff codes to include or exclude from checking
                (all sniffs must be part of the specified standard)
 <standard>     The name or path of the coding standard to use
 <stdinPath>    If processing STDIN, the file path that STDIN will be processed as
 <tabWidth>     The number of spaces each tab represents

The --standard command line argument is optional, even if you have more than one coding standard installed. If no coding standard is specified, PHP_CodeSniffer will default to checking against the PEAR coding standard, or the standard you have set as the default. View instructions for setting the default coding standard.

Checking Files and Folders

The simplest way of using PHP_CodeSniffer is to provide the location of a file or folder for PHP_CodeSniffer to check. If a folder is provided, PHP_CodeSniffer will check all files it finds in that folder and all its sub-folders. If you do not want sub-folders checked, use the -l command line argument to force PHP_CodeSniffer to run locally in the folders specified.

In the example below, the first command tells PHP_CodeSniffer to check the myfile.inc file for coding standard errors while the second command tells PHP_CodeSniffer to check all PHP files in the my_dir directory.

$ phpcs /path/to/code/myfile.inc
$ phpcs /path/to/code/my_dir

You can also specify multiple files and folders to check. The command below tells PHP_CodeSniffer to check the myfile.inc file and all files in the my_dir directory.

$ phpcs /path/to/code/myfile.inc /path/to/code/my_dir

After PHP_CodeSniffer has finished processing your files, you will get an error report. The report lists both errors and warnings for all files that violated the coding standard. The output looks like this:

$ phpcs /path/to/code/myfile.php

FILE: /path/to/code/myfile.php
--------------------------------------------------------------------------------
FOUND 5 ERROR(S) AND 1 WARNING(S) AFFECTING 5 LINE(S)
--------------------------------------------------------------------------------
  2 | ERROR   | Missing file doc comment
 20 | ERROR   | PHP keywords must be lowercase; expected "false" but found
    |         | "FALSE"
 47 | ERROR   | Line not indented correctly; expected 4 spaces but found 1
 47 | WARNING | Equals sign not aligned with surrounding assignments
 51 | ERROR   | Missing function doc comment
 88 | ERROR   | Line not indented correctly; expected 9 spaces but found 6
--------------------------------------------------------------------------------

If you don't want warnings included in the output, specify the -n command line argument.

$ phpcs -n /path/to/code/myfile.php

FILE: /path/to/code/myfile.php
--------------------------------------------------------------------------------
FOUND 5 ERROR(S) AFFECTING 5 LINE(S)
--------------------------------------------------------------------------------
  2 | ERROR | Missing file doc comment
 20 | ERROR | PHP keywords must be lowercase; expected "false" but found "FALSE"
 47 | ERROR | Line not indented correctly; expected 4 spaces but found 1
 51 | ERROR | Missing function doc comment
 88 | ERROR | Line not indented correctly; expected 9 spaces but found 6
--------------------------------------------------------------------------------

Printing a Summary Report

By default, PHP_CodeSniffer will print a complete list of all errors and warnings it finds. This list can become quite long, especially when checking a large number of files at once. To print a summary report that only shows the number of errors and warnings for each file, use the --report=summary command line argument. The output will look like this:

$ phpcs --report=summary /path/to/code

PHP CODE SNIFFER REPORT SUMMARY
--------------------------------------------------------------------------------
FILE                                                            ERRORS  WARNINGS
--------------------------------------------------------------------------------
/path/to/code/myfile.inc                                        5       0
/path/to/code/yourfile.inc                                      1       1
/path/to/code/ourfile.inc                                       0       2
--------------------------------------------------------------------------------
A TOTAL OF 6 ERROR(S) AND 3 WARNING(S) WERE FOUND IN 3 FILE(S)
--------------------------------------------------------------------------------

As with the full report, you can suppress the printing of warnings with the -n command line argument.

$ phpcs -n --report=summary /path/to/code

PHP CODE SNIFFER REPORT SUMMARY
--------------------------------------------------------------------------------
FILE                                                                      ERRORS
--------------------------------------------------------------------------------
/path/to/code/myfile.inc                                                  5
/path/to/code/yourfile.inc                                                1
--------------------------------------------------------------------------------
A TOTAL OF 6 ERROR(S) WERE FOUND IN 2 FILE(S)
--------------------------------------------------------------------------------

Printing Progress Information

By default, PHP_CodeSniffer will run quietly, only printing the report of errors and warnings at the end. If you are checking a large number of files, you may have to wait a while to see the report. If you want to know what is happening, you can turn on progress or verbose output.

With progress output enabled, PHP_CodeSniffer will print a single-character status for each file being checked. The possible status characters are:

. : The file contained no errors or warnings
E : The file contained 1 or more errors
W : The file contained 1 or more warnings, but no errors
S : The file contained a @codingStandardsIgnoreFile comment and was skipped

Progress output will look like this:

$ phpcs /path/to/code/CodeSniffer -p
......................S.....................................  60 / 572
..........EEEE.E.E.E.E.E.E.E.E..W..EEE.E.E.E.EE.E.E.E.E.E.E. 120 / 572
E.E.E.E.E.WWWW.E.W..EEE.E.................E.E.E.E...E....... 180 / 572
E.E.E.E.....................E.E.E.E.E.E.E.E.E.E.W.E.E.E.E.E. 240 / 572
E.W......................................................... 300 / 572
..........................................E.E.E.E...E.E.E.E. 360 / 572
E.E.E.E.E.E..E.E.E..E..E..E.E.WW.E.E.EE.E.E................. 420 / 572
...................E.E.EE.E.E.E.S.E.EEEE.E...E...EE.E.E..EEE 480 / 572
.E.EE.E.E..E.E.E.E.E.E.E.E.E.E.E.E.E.E.E.E.E..E..E..E.E.E..E 540 / 572
.E.E....E.E.E...E.....E.E.ES....

You can configure PHP_CodeSniffer to show progress information by default using the configuration option.

With verbose output enabled, PHP_CodeSniffer will print the file that it is checking, show you how many tokens and lines the file contains, and let you know how long it took to process. The output will look like this:

$ phpcs /path/to/code/CodeSniffer -v
Registering sniffs in PEAR standard... DONE (24 sniffs registered)
Creating file list... DONE (572 files in queue)
Processing AbstractDocElement.php [1093 tokens in 303 lines]... DONE in < 1 second (0 errors, 1 warnings)
Processing AbstractParser.php [2360 tokens in 558 lines]... DONE in 2 seconds (0 errors, 1 warnings)
Processing ClassCommentParser.php [923 tokens in 296 lines]... DONE in < 1 second (2 errors, 0 warnings)
Processing CommentElement.php [988 tokens in 218 lines]... DONE in < 1 second (1 error, 5 warnings)
Processing FunctionCommentParser.php [525 tokens in 184 lines]... DONE in 1 second (0 errors, 6 warnings)
Processing File.php [10968 tokens in 1805 lines]... DONE in 5 seconds (0 errors, 5 warnings)
Processing Sniff.php [133 tokens in 94 lines]... DONE in < 1 second (0 errors, 0 warnings)
Processing SniffException.php [47 tokens in 36 lines]... DONE in < 1 second (1 errors, 3 warnings)

Specifying a Coding Standard

PHP_CodeSniffer can have multiple coding standards installed to allow a single installation to be used with multiple projects. When checking PHP code, PHP_CodeSniffer can be told which coding standard to use. This is done using the --standard command line argument.

The example below checks the myfile.inc file for violations of the PEAR coding standard (installed by default).

$ phpcs --standard=PEAR /path/to/code/myfile.inc

You can also tell PHP_CodeSniffer to use an external standard by specifying the full path to the standard's root directory on the command line. An external standard is one that is stored outside of PHP_CodeSniffer's Standards directory.

$ phpcs --standard=/path/to/MyStandard /path/to/code/myfile.inc

Multiple coding standards can be checked at the same time by passing a list of comma separated standards on the command line. A mix of external and installed coding standards can be passed if required.

$ phpcs --standard=PEAR,Squiz,/path/to/MyStandard /path/to/code/myfile.inc

Printing a List of Installed Coding Standards

PHP_CodeSniffer can print you a list of the coding standards that are installed so that you can correctly specify a coding standard to use for testing. You can print this list by specifying the -i command line argument.

$ phpcs -i
The installed coding standards are MySource, PEAR, PHPCS, PSR1, PSR2, Squiz and Zend

Listing Sniffs Inside a Coding Standard

PHP_CodeSniffer can print you a list of the sniffs that a coding standard includes by specifying the -e command line argument along with the --standard argument. This allows you to see what checks will be applied when you use a given standard.

$ phpcs --standard=PSR1 -e

The PSR1 standard contains 7 sniffs

Generic (3 sniffs)
------------------
  Generic.Files.ByteOrderMark
  Generic.NamingConventions.UpperCaseConstantName
  Generic.PHP.DisallowShortOpenTag

PSR1 (3 sniffs)
---------------
  PSR1.Classes.ClassDeclaration
  PSR1.Files.SideEffects
  PSR1.Methods.CamelCapsMethodName

Squiz (1 sniff)
----------------
  Squiz.Classes.ValidClassName

For everyone

Introduction
Requirements
Usage
Advanced Usage
Reporting
Configuration Options
Fixing Errors Automatically
FAQ

For coding standard creators

Annotated Ruleset
Customisable Sniff Properties

For sniff developers

Coding Standard Tutorial
Version 3.0 Upgrade Guide
Version 1.3.0 Upgrade Guide

Provide feedback

Saved searches

Use saved searches to filter your results more quickly