doc: appendices: Adding the results of the visual inspection test of …

…the v0.7 board #313

doc/appendices/test_report_v07.tex

@@ -29,37 +29,38 @@ \chapter{Test Report of v0.7 Version} \label{anx:test-report-v07}
     \item \textbf{PCB assembly}: PCBWay (China)
     \item \textbf{PCB arrival date}: 2022/04/18
     \item \textbf{Execution date}: 2022/04/22 to \textcolor{red}{TBC}
-    \item \textbf{Tester}: \textcolor{red}{TBC}
+    \item \textbf{Tester}: Gabriel M. Marcelino and Vitória B. Bianchin
     \item \textbf{DNP components}: P8, P2, P5, P6, P7, D1, D2, D3, D4, D5, D6, D7, D8, U10, R19, R20, R\_ESD, J\_PC3, J\_PC4, R2, R3, R4, R5, R6, R7, R12, R13, J\_V3, J\_PC5, J\_PC6, J\_PC7, J\_PC1, J\_PC2, V1, V4, R36, C36
 \end{itemize}
 
 \section{Visual Inspection}
 
-%\begin{itemize}
-%    \item \textbf{Test description/Objective}: Inspection of the board, visually and with a multimeter, searching for fabrication and assembly failures.
-%    \item \textbf{Material}:
-%        \begin{itemize}
-%            \item \textcolor{red}{TBC}
-%        \end{itemize}
-%    \item \textbf{Results}: %The results of this test can be seen in Figures \ref{fig:obdh2-v06-top} (top view of the board) and \ref{fig:obdh2-v06-bottom} (bottom view of the board).
-%    \item \textbf{Conclusion}: %No problems were identified on this test.
-%\end{itemize}
+\begin{itemize}
+    \item \textbf{Test description/Objective}: Inspection of the board, visually and with a multimeter, searching for fabrication and assembly failures.
+    \item \textbf{Material}:
+        \begin{itemize}
+            \item Digital microscope (1000x)
+            \item Multimeter Fluke 17B+
+        \end{itemize}
+    \item \textbf{Results}: The results of this test can be seen in Figures \ref{fig:obdh2-v07-top} (top view of the board) and \ref{fig:obdh2-v07-bottom} (bottom view of the board).
+    \item \textbf{Conclusion}: No problems were identified on this test.
+\end{itemize}
 
-%\begin{figure}[!ht]
-%    \begin{center}
-%        \includegraphics[width=\columnwidth]{figures/v06/obdh2-v06-top.jpg}
-%        \caption{Top view of the OBDH 2.0 v0.6 board.}
-%        \label{fig:obdh2-v06-top}
-%    \end{center}
-%\end{figure}
-%
-%\begin{figure}[!ht]
-%    \begin{center}
-%        \includegraphics[width=\columnwidth]{figures/v06/obdh2-v06-bottom.jpg}
-%        \caption{Bottom view of the OBDH 2.0 v0.6 board.}
-%        \label{fig:obdh2-v06-bottom}
-%    \end{center}
-%\end{figure}
+\begin{figure}[!ht]
+    \begin{center}
+        \includegraphics[width=\columnwidth]{figures/v07/obdh2-v07-top.jpg}
+        \caption{Top view of the OBDH 2.0 v0.7 board.}
+        \label{fig:obdh2-v07-top}
+    \end{center}
+\end{figure}
+
+\begin{figure}[!ht]
+    \begin{center}
+        \includegraphics[width=\columnwidth]{figures/v07/obdh2-v07-bottom.jpg}
+        \caption{Bottom view of the OBDH 2.0 v0.7 board.}
+        \label{fig:obdh2-v07-bottom}
+    \end{center}
+\end{figure}
 
 \section{Firmware Programming}