Overview • Repository Organizarion • License • Releases • Notes
The FlatSat Platform 2.0 is a testbench for testing the main SpaceLab's subsystems (but can be adapted for other CubeSat missions). A FlatSat is an electrical model of the satellite with the subsystems assembled side by side over a workbench that can be mounted during the V&V [1]. They offer an easier, faster and safer way for testing subsystems before assembly into the final structure of a CubeSat. It can be used in combination with the hardware-in-the-loop (HIL) technique, which justifies the usage of a built-in MicroZed and sensors. It supports up to 6 modules.
- doc: Technical FlatSat's documentation.
- firmware: FlatSat's firmware project (sources and configs)
- hardware: Flatsat's hardware project (sources and outputs).
This project is open-source under three different licenses: CERN Open Hardware License v2.0 for hardware, GNU General Public License v3.0 for firmware, and CC BY-SA 4.0 for the documentation.
The FlatSat Platform hardware releases are synchronized in order to garantee compatibility. Then, using diferent versions might lead to unpredictable behavior. Refer to the documentation for compatibility notes.
More info about the SpaceLab: GitHub and Website.
[1] J. C. E. Barcellos, A. W. Spengler, L. O. Seman, R. D. C. e. Silva, H. P. Roldán and E. A. Bezerra, "FlatSat Platforms for Small Satellites: A Systematic Mapping and Classification," in IEEE Journal on Miniaturization for Air and Space Systems, vol. 4, no. 2, pp. 186-198, June 2023, doi: 10.1109/JMASS.2023.3249044.