This folder contains scripts to be used in the commissioning process and practice of TFPX module assembly.
Scripts used to assemble an HDI to a Single Large Glass Piece. The Single Glass Piece is a substitute for a 2x2 SensorROC.
-
Assembly_RD53A_SingleGlass.gscript. This script reads site-specific geometry from the flex_config.txt from the Config area corresponding to an assembly site and runs code to assembly the single mock-ROC glass piece with no bond pads. It collects surveillance data using the corners of the mock-ROC and the HDI bond pads after assembly.
-
HDI_Translation_RD53A.gscript. This script computes the translation and rotation vector for moving the HDI from Chuck 2 to Chuck 1 using the vacuum tool.
-
SensorROC_Translation_RD53A.gscript. This script computes the translation and rotation vector for moving the Single Glass Piece from the Launchpad to Chuck 1 using the gantry.
Scripts used to assemble an HDI to Four Small Glass Pieces. The Small Glass Pieces are substitues for RD53A ROCs that may be individually glued to the HDI.
- Assembly_RD53A_MultiGlass_twinSucker.gscript. This script assembles four glass pieces without bond pads to the HDI using the twin sucker tool.
Scripts used to assemble an HDI to Four RD53A chips.
- Assembly_RD53A_MultiROC.gscript. This script assembles four RD53A chips to the HDI using the twin sucker tool.