Skip to content

Commit

Permalink
Add/Update 'Go Back To..' statements
Browse files Browse the repository at this point in the history
  • Loading branch information
@mdanish-kh
mdanish-kh committed Oct 23, 2022
1 parent 9297cac commit 35a07db
Showing 1 changed file with 26 additions and 29 deletions.
55 changes: 26 additions & 29 deletions doc/Command-Reference.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1258,7 +1258,7 @@ When user has not configured server specific timeout, this global value shall be
admin@sonic:~$ sudo config tacacs timeout 60
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#aaa--tacacs)
Go Back To [Beginning of the document](#) or [Beginning of this section](#tacacs)



Expand Down Expand Up @@ -1439,8 +1439,6 @@ When the optional argument "max_priority" is specified, each rule’s priority
File "acl_incremental_snmp_1_3_ssh_4.json" has got SNMP Rule1, SNMP Rule3 and SSH Rule4.
This file is created by copying the file "acl_full_snmp_1_2_ssh_4.json" to "acl_incremental_snmp_1_3_ssh_4.json" and then removing SNMP Rule2 and adding SNMP Rule3.

Go Back To [Beginning of the document](#) or [Beginning of this section](#acl)

**config acl add table**

This command is used to create new ACL tables.
Expand Down Expand Up @@ -1618,6 +1616,8 @@ This command displays the state and key parameters of all BFD sessions that matc
10.0.1.1 default default DOWN async_active 10.0.0.1 300 500 3 true
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#bfd)

## BGP

This section explains all the BGP show commands and BGP configuation commands in both "Quagga" and "FRR" routing software that are supported in SONiC.
Expand Down Expand Up @@ -1987,6 +1987,7 @@ This command displays the routing policy that takes precedence over the other ro
Exit routemap
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#bgp)

### BGP config commands

Expand Down Expand Up @@ -2531,7 +2532,7 @@ This comnmand is used to clear drop counters. This is done on a per-user basis.
Cleared drop counters
```

Go Back To [Beginning of the document](#) or [Beginning of this section](##drop-counters)
Go Back To [Beginning of the document](#) or [Beginning of this section](#drop-counters)

## Dynamic Buffer Management

Expand Down Expand Up @@ -2623,8 +2624,6 @@ This command is used to configure the length of the cable connected to a port. T
admin@sonic:~$ sudo config interface cable_length Ethernet0 40m
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#dynamic-buffer-management)

**config interface buffer priority-group lossless**

This command is used to configure the priority groups on which lossless traffic runs.
Expand Down Expand Up @@ -2680,8 +2679,6 @@ This command is used to configure the priority groups on which lossless traffic
admin@sonic:~$ sudo config interface buffer priority-group lossless remove Ethernet0
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#dynamic-buffer-management)

**config interface buffer queue**

This command is used to configure the buffer profiles for queues.
Expand Down Expand Up @@ -2919,6 +2916,8 @@ This command is used to display the status of buffer pools and profiles currentl
---------- --------------------------------
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#dynamic-buffer-management)

## ECN

This section explains all the Explicit Congestion Notification (ECN) show commands and ECN configuation options that are supported in SONiC.
Expand Down Expand Up @@ -3825,6 +3824,8 @@ This command displays some more fields such as Lanes, Speed, MTU, Type, Asymmetr

This command is already explained [here](#Transceivers)

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

### Interface Config Commands
This sub-section explains the following list of configuration on the interfaces.
1) ip - To add or remove IP address for the interface
Expand Down Expand Up @@ -4235,8 +4236,6 @@ Double tab i.e. <tab><tab> to see the available breakout option customized for e

For details please refer [DPB HLD DOC](https://github.com/sonic-net/SONiC/blob/master/doc/dynamic-port-breakout/sonic-dynamic-port-breakout-HLD.md#cli-design) to know more about this command.

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface autoneg <interface_name> (Versions >= 202106)**

This command is used to set port auto negotiation mode.
Expand All @@ -4260,8 +4259,6 @@ This command is used to set port auto negotiation mode.
admin@sonic:~$ sudo config interface autoneg Ethernet0 disabled
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface advertised-speeds <interface_name> (Versions >= 202106)**

This command is used to set port advertised speed.
Expand All @@ -4285,8 +4282,6 @@ This command is used to set port advertised speed.
admin@sonic:~$ sudo config interface advertised-speeds Ethernet0 50000,100000
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface advertised-types <interface_name> (Versions >= 202106)**

This command is used to set port advertised interface types.
Expand All @@ -4310,8 +4305,6 @@ This command is used to set port advertised interface types.
admin@sonic:~$ sudo config interface advertised-types Ethernet0 CR,CR4
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface type <interface_name> (Versions >= 202106)**

This command is used to set port interface type.
Expand All @@ -4333,32 +4326,24 @@ This command is used to set port interface type.
admin@sonic:~$ sudo config interface type Ethernet0 CR4
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface cable_length (Versions >= 202006)**

This command is used to configure the length of the cable connected to a port. The cable_length is in unit of meters and must be suffixed with "m".

For details please refer [dynamic buffer management](#dynamic-buffer-management)

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface lossless_pg (Versions >= 202006)**

This command is used to configure the priority groups on which lossless traffic runs.

For details please refer [dynamic buffer management](#dynamic-buffer-management)

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface headroom_override (Versions >= 202006)**

This command is used to configure a static buffer profile on a port's lossless priorities. There shouldn't be any `lossless_pg` configured on the port when configuring `headroom_override`. The port's headroom won't be updated after `headroom_override` has been configured on the port.

For details please refer [dynamic buffer management](#dynamic-buffer-management)

Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)

**config interface mpls add <interface_name> (Versions >= 202106)**

This command is used for adding MPLS operation on the interface.
Expand Down Expand Up @@ -5046,6 +5031,9 @@ last number of lines.
[ 656.337476] gpio_ich(E) ahci(E) mlxsw_core(E) libahci(E) devlink(E) crc32c_intel(E) libata(E) i2c_i801(E) scsi_mod(E) lpc_ich(E) mfd_core(E) ehci_pci(E) ehci_hcd(E) usbcore(E) e1000e(E) usb_common(E) fan(E) thermal(E)
[ 656.569590] CR2: 0000000000000000
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#linux-kernel-dump)

### Linux Kernel Dump config command

**config kdump**
Expand All @@ -5067,7 +5055,7 @@ Since this command might require changing the kernel parameters to specify the a
num_dumps Configure the maximum dump files of KDUMP mechanism
```
Go Back To [Beginning of the document](#) or [Beginning of this section](#kdump)
Go Back To [Beginning of the document](#) or [Beginning of this section](#linux-kernel-dump)

## LLDP

Expand Down Expand Up @@ -5371,6 +5359,8 @@ It is recommended to use loopback names in the format "Loopbackxxx", where "xxx"
admin@sonic:~$ sudo config loopback add Loopback11
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#loopback-interfaces)

## VRF Configuration

### VRF show commands
Expand Down Expand Up @@ -5421,6 +5411,8 @@ This command deletes vrf with name vrf-name.
config vrf del <vrf-name>
```

Go Back To [Beginning of the document](#) or [Beginning of this section](#vrf-configuration)

## Management VRF

### Management VRF Show commands
Expand Down Expand Up @@ -7088,6 +7080,8 @@ It supports add/delete operations.
config nvgre-tunnel-map delete 'tunnel_1' 'Vlan2000'
```
Go Back To [Beginning of the document](#) or [Beginning of this section](#nvgre)
## PBH
This section explains the various show commands and configuration commands available for users.
Expand Down Expand Up @@ -8386,6 +8380,8 @@ This command is used to add or delete the SNMP user for SNMPv3.
Restarting SNMP service...
```
Go Back To [Beginning of the document](#) or [Beginning of this section](#snmp)
## Startup & Running Configuration
### Startup Configuration
Expand Down Expand Up @@ -8699,7 +8695,7 @@ This sub-section explains how to configure subinterfaces.
admin@sonic:~$ sudo config subinterface del Eth64.100 100
```
Go Back To [Beginning of the document](#) or [Beginning of this section](#static-routing)
Go Back To [Beginning of the document](#) or [Beginning of this section](#subinterfaces)
## Syslog
Expand Down Expand Up @@ -9051,8 +9047,6 @@ This command displays virtual address to the physical address translation status
Go Back To [Beginning of the document](#) or [Beginning of this section](#System-State)
Go Back To [Beginning of the document](#) or [Beginning of this section](#System-Health)
### System-Health
These commands are used to monitor the system current running services and hardware state.
Expand Down Expand Up @@ -9234,7 +9228,8 @@ In addition, displays a list of all current 'Services' and 'Hardware' being moni
----------- -------- ------
psu.voltage Ignored Device
```
Go Back To [Beginning of the document](#) or [Beginning of this section](#System-Health)
Go Back To [Beginning of the document](#) or [Beginning of this section](#System-State)
## VLAN & FDB
Expand Down Expand Up @@ -11455,3 +11450,5 @@ Clear MACsec counters which is to reset all MACsec counters to ZERO.
the service booted instead of the last clear command.
-h, -?, --help Show this message and exit.
```
Go Back To [Beginning of the document](#) or [Beginning of this section](#macsec-commands)

0 comments on commit 35a07db

Please sign in to comment.