Tornado Tramming Updates

rwoelk · Nov 7, 2022 · fb6dfe6 · fb6dfe6
1 parent cd89c9c
commit fb6dfe6
Showing 1 changed file with 4 additions and 4 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -1107,7 +1107,7 @@
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
 #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
 #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
-#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
 #define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
@@ -1116,7 +1116,7 @@
 #define W_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Z_MAX_ENDSTOP_INVERTING true  // Set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false  // Set to true to invert the logic of the endstop.
 #define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
@@ -2028,10 +2028,10 @@
 #define LCD_BED_TRAMMING
 
 #if ENABLED(LCD_BED_TRAMMING)
-  #define BED_TRAMMING_INSET_LFRB { 78, 10, 48, 10 } // (mm) Left, Front, Right, Back insets
+  #define BED_TRAMMING_INSET_LFRB { 0, 10, 33, 10 } // (mm) Left, Front, Right, Back insets
   #define BED_TRAMMING_HEIGHT      0.2        // (mm) Z height of nozzle at leveling points
   #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z height of nozzle between leveling points
-  //#define BED_TRAMMING_INCLUDE_CENTER       // Move to the center after the last corner
+  #define BED_TRAMMING_INCLUDE_CENTER       // Move to the center after the last corner
   #define BED_TRAMMING_USE_PROBE
   #if ENABLED(BED_TRAMMING_USE_PROBE)
     #define BED_TRAMMING_PROBE_TOLERANCE 0.1  // (mm)