FreeAtHome Binding 1.1.0-alpha
This binding integrates with B+J FreeAtHome smarthome system by connecting to the SysAP.
The binding is available via EclipseMarketPlace: FreeAtHome
Disclaimer: This binding is a private contribution and is not an official B+J product.
Changes since last release:
- Now firmware versions >= 2.2.4 via websockets are also supported - big thanks to @kjoglum #47 #48 #49
Supported things
- BridgeGateway: Connects to the B+J SysAP. All commands from the things are routed through this bridge. The bridge has to added manually before starting discovery.
- Raffstore: Switch to run blinds or raffstore shutters stepwise or completely.
- Scenario selector: This thing can be used to provide user switches to configure different scenarios e.g. @Home. The status of these switches can be used by rules to setup different scenarios.
- Scene: Switch that activates a scene that was generated within freeathome webui. The switch is autoresetted after a configurable timeout.
- Switch: Binary switch or switch group.
- Dimmer: dimmer with fading support
- Thermostat: supporting target temperature, eco mode, room temperature
- Weather station: providing wind speed, temperature, illumination.
Update events supported for most of the channels: If the physical B+J device is changed e.g. room temperature, raffstore, wind for weather station this is notified by update events to openhab things.
Issues: If you find any issue please submit new issues or feature requests on my private github repo ruebox@github:issues until the binding is merge to offical openhab distribution. Please check already existing issues before submitting a new one.