Code structure adapted from https://towardsdatascience.com/ultimate-setup-for-your-next-python-project-179bda8a7c2c

Install some tools: $sudo apt-get install i2c-tools $sudo apt-get install libopenjp2-7 $sudo apt-get install libatlas-base-dev

To install requirements: $pip3 install -r requirements.txt

Run application: $python3 infodisplay

Connections:

Raspberry Pi TFT

3V3 Vcc GND GND SPIO0 CS (GPIO8) CS GPIO25 RESET GPIO24 DC SPI0 MOSI (GPIO10) MOSI
SPI0 SCLK (GPIO11) SCK GPIO15 LED SPI0 MISO (GPIO0) MISO GPIO16 T_IRQ

                    BME280

3V3 Vcc GND GND I2C1 SCL (GPIO3) SCL I2C1 SDA (GPIO2) SDA