Setting up in CLion
This will explain how to setup with openocd, cmake, ninja, and clion.
###Install CLion
I just grab it from jetbrains.com
###Install CMake Please use at least 3.19. The general instruction is to grab it from https://cmake.org/download/. ####Windows To set up on windows, download cmake from cmake.com or use choco. ####Linux You can grab a shell installer from cmake.org as noted above. Source build:
sudo apt install build-essential libssl-dev
wget https://github.com/Kitware/CMake/releases/download/v3.20.2/cmake-3.20.2.tar.gz
tar -zxvf cmake-3.20.2.tar.gz
cd cmake-3.20.2
./bootstrap
make
sudo make install Other options here: https://graspingtech.com/upgrade-cmake/
Using apt is a little complicated because you have to add the kitware repository. However that means you also get the latest version when you update using apt. https://apt.kitware.com/
Generally ninja is up to date on most platforms using a package manager. You can manually install it here: https://github.com/ninja-build/ninja/releases
OpenOCD installed and worked correctly with apt and homebrew but did not work on windows with choco. Binaries can be downloaded for Windows at https://gnutoolchains.com/arm-eabi/openocd/. Add the bin folder to your path.
Windows
*Ensure you have the correct drivers. If using an ST-Link debugger, download the Windows drivers: https://www.st.com/en/development-tools/stsw-link009.html I can't remember if I had to do something specific in Linux or on Mac.