danectl - DNSSEC DANE implementation manager
DANE is DNS-based Authentication of Named Entities. It means securely letting the world know in advance what your public encryption keys are by publishing them as DNS records (TLSA SSHFP OPENPGPKEY SMIMEA) in your DNSSEC-enabled internet domain zone. This is the simplest and most secure way to let the world know what keys to expect when connecting to your servers. This can apply to TLS keys, SSH host keys, and OpenPGP and S/MIME keys. This makes it possible to prevent impersonation or man-in-the-middle attacks. It's mostly used with mail servers. Eventually, it could render certificate authorities unnecessary. DNSSEC has become very easy these days.
Danectl is a DNSSEC DANE implementation manager. It uses certbot to create and manage pairs of keys for use with a TLSA 3 1 1 current + next workflow. It generates TLSA records for your TLS services for you to publish in the DNS, checks that they are correctly published, and performs key rollovers.
Danectl can also generate and check SSHFP records for the local SSH server.
Danectl can also generate and check an OPENPGPKEY record for a GnuPG key.
Danectl can also generate and check an SMIMEA record for an S/MIME certificate.
Danectl lets you create a pair of certbot certificate lineages to be used with DANE-aware TLS clients. They are referred to as the "original" and the "duplicate", or as the "current" and the "next".
danectl new example.org www.example.org mail.example.org
danectl dup example.org www.example.org mail.example.org
The current and next will repeatedly swap places between the original and the duplicate certificate lineages as the key rolls over from one to the other (with a new "next" key being created after each rollover).
If you already have a certbot certificate lineage that you want to use with DANE, then instead of creating both certificate lineages, you can adopt the existing one for DANE use, and then just create the duplicate.
danectl adopt example.org
danectl dup example.org www.example.org mail.example.org
After that, certbot automatically renews both certificates every few months, but the underlying keys won't change, and the TLSA records (see below) can remain stable.
You then configure danectl with the set of port/protocol/host combinations that you need TLSA records for.
danectl add-tlsa example.org _443._tcp _443._tcp.www
danectl add-tlsa example.org _25._tcp.mail
danectl add-tlsa example.org _465._tcp.mail _587._tcp.mail
danectl add-tlsa example.org _110._tcp.mail _143._tcp.mail
danectl add-tlsa example.org _993._tcp.mail _995._tcp.mail
danectl del-tlsa example.org _110._tcp.mail _143._tcp.mail
Danectl can then output the TLSA records, in BIND9 zonefile format, and you need to publish them in the DNS (somehow).
danectl tlsa-current example.org
danectl tlsa-next example.org
Danectl can then check that the TLSA records have been published in the DNS.
danectl tlsa-check example.org
You also need to configure danectl with the list of TLS services that need to be reloaded when the key rolls over.
danectl add-reload example.org apache2 postfix dovecot
danectl del-reload example.org postfix
This is needed even when certbot is configured to do it with deploy hooks, because those hooks are only run when a certificate is renewed. Service reloads also need to happen when there's a DANE key rollover, and that doesn't necessarily happen at the same time as automatic certbot certificate renewals.
You then need to configure your TLS services to use the "current" certificate in /etc/letsencrypt/current, and then reload them. This is like following instructions for using a certbot certificate, but replacing "/etc/letsencrypt/live" with "/etc/letsencrypt/current".
Left as an exercise for the reader
Periodically, you can perform key rollovers on a schedule that suits you (e.g., annually). An emergency key rollover is exactly the same.
danectl rollover example.org
At any time, you can show the status (which certificate lineages are current, which are next, which new TLSA records are not yet published in the DNS, and which old TLSA records have not yet been removed from the DNS).
danectl status
In addition to TLSA records, you can also generate SSHFP, OPENPGPKEY, and SMIMEA records, and check that they are published in the DNS.
danectl sshfp example.org
danectl sshfp-check example.org
danectl openpgpkey user@example.org
danectl openpgpkey-check user@example.org
danectl smimea smimecert.pem
danectl smimea-check smimecert.pem
To install danectl:
tar xzf danectl-0.8.4.tar.gz
cd danectl-0.8.4
make install
This will install:
/usr/local/bin/danectl
/usr/local/bin/danectl-zonefile
/usr/local/bin/danectl-nsupdate
/usr/local/share/man/man1/danectl.1
/usr/local/share/man/man1/danectl-zonefile.1
/usr/local/share/man/man1/danectl-nsupdate.1
To install under /usr instead:
make PREFIX=/usr install
To uninstall danectl:
make uninstall
See make help for more details.
Danectl is written in Bourne shell, and should work on any platform
that has the following prerequisites.
In all cases, danectl requires /bin/sh and host (or drill).
On systems like Solaris, /usr/xpg4/bin/sh is used instead of /bin/sh.
For TLSA usage, danectl also requires ls, sed, grep, readlink, certbot,
openssl, sha256sum, and root privileges (for certbot).
For SSHFP usage, danectl also requires sed, perl and ssh-keygen.
For OPENPGPKEY usage, danectl also requires perl and gpg.
For SMIMEA usage, danectl also requires perl and openssl.
For non-ASCII domain names, danectl also requires GNU idn2.
The danectl-zonefile output adapter requires perl.
The danectl-nsupdate output adapter requires perl.
For reloading affected services on key rollover, any system with
systemctl, service, rcctl, or service scripts in
/etc/init.d, /etc/rc.d, or /usr/local/etc/rc.d should work
(e.g., Linux, FreeBSD, NetBSD, OpenBSD, Solaris).
URL: https://raf.org/danectl
GIT: https://github.com/raforg/danectl
GIT: https://codeberg.org/raforg/danectl
Date: 20230718
Author: raf <raf@raf.org>