micronova_controller_pcb

The repo for the PCB made to work with the micronova_controller project. Software details here.

Kits are available on Tindie!
In stock every month.
Here is an overview of the additions:

• possibility to reset the settings with a flat screwdriver
• IO footprints are now designed to accept screw terminals
• D0 and RST are connected for deep sleep
• a row of pins has been added to access unused pins

License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Working with

stoves equipped with Micronova mainboard.

Known brands

• AMG S.p.A. (Artel, Kalor, Tepor, Foco, Adler)
• Anselmo Cola
• Boreal
• Bronpi
• Cadel
• Clam
• Corisit S.r.l. (Lincar, Vulcania, Arce)
• Ecoteck
• EL.FIRE
• EOSS
• EvaCalor
• Fontana Calore
• Fonte Flamme
• Galletti
• Globe-Fire
• Italiana Camini
• Jolly Mec
• Karmek
• Kepo
• Klover
• Laminox
• LMX
• La Nordica S.p.A (Extraflame, Dal Zotto)
• Lorflam
• MCZ (Brisach, Cadel, FreePoint, Pegaso, Red)
• Moretti Design
• Nordic Fire
• Palladio
• Piazetta
• Sicalor
• Stufe a pellet Italia
• Tecnoflam
• Termoflam
• Thermoflux
• TS
• Ungaro
• Zibro

Confirmed working with

Known models

• RED Loto
• MCZ Kaika/Face
• FreePoint Sharp
• Anselmo Cola Aloe
• Kalor Compact (boiler, fumesTempAddr 0xFF, flamePowerAddr 0x37)
• ITC Layma (boiler, fumesTempAddr 0x5A, no water pressure value available)
• Piazetta P958D
• Piazetta Line
• ETNA Giulia EVO (Micronova J042, fumes temp and power reading doesn't work for the moment)
• Extraflame Teodora Evo (at least turning on works)
• El.Fire Venice Slim
• Palladio Europa