DoMoAct is a system to can switch a GPIO's high/low based on comparing the requested switch time against the current time. The current time is taken from the time. Time is initialized from an NTP server at start-up and every night after.The switch time can be set as a hard / fixed time or based on the daily sunset / sunrise time on your location. DayLightSaving is handled as well.
You can also add sensors to switch a GPIO. One could measure the temperature and if too high, switch on a blower, or measure the waterlevel and switch a pump if level is too high or too low. As an example there is a temperature sensor DS1820.
DoMoAct has a serial-menu which is the primary source for configuration and a WEB-menu that is mend for the user. Next to configuration there are a number of parameters that can be set for customization before compile. E.g. It allows for more ports, groups and sensors, you can set username and password protection for access to DoMoAct, use an LCD/ led Matrix to show status and switch information, store sensor specific information in the EEPROM or SPIFFS. etc.
It contains a buffer of the last 50 switches actions (this can be extended) that can recalled with the serial-menu. The Web-interface can be set to different background themes.
##Different versions There are 3 versions which do functionally the same, the look&feel is the same, but parts of the code are slidly different.
- Using UNO-R4 Wifi. This is using an HTTP server and the on-board LED Matrix.
- Using ESP32-HTTPS. This is using an external HTTPS-server. It is reaction slower due to checks and structure of the HTTPS server.
- Using ESP32-HTTP. Using the standard ESP32 HTTP-server implementation.
Please refer to the individual sub-folders for more information.
- V1.1 / January 2024 initial version
Distributed as-is; no warranty is given.