GPIO RPI Radioberry

GPIO - Radioberry

The table shows the coupling to the radioberry radio card.

This is the situation for the standalone configuration. In the emulator mode please do not use the GPIO pins.

function	fpga	BCM	Pin	Pin	BCM	fpga	function
3V3	-	-	1	2	-	-	5V
i2c-SDA	-	2	3	4	-	-	5V
i2c-SCL	-	3	5	6	-	-	Ground
pi_tx_clk	55	4	7	8	14	-	No use
Ground	-	-	9	10	15	-	No use
pi_tx_data[3]	113	17	11	12	18	33	pi_tx_data[1]
NCONFIG	14	27	13	14	-	-	Ground
CONF_DONE	92	22	15	16	23	39	keyer CWL
3V3	-	-	17	18	24	12	DCLK
MOSI	60	10	19	20	-	-	Ground
MISO	59	9	21	22	25	31	pi_rx_samples
SCLK	58	11	23	24	8	51	CE0
Ground	-	-	25	26	7	50	pi_tx_samples
No use	-	-	27	28	-	-	No use
pi_tx_data[2]	32	5	29	30	-	-	Ground
pi_rx_clk	54	6	31	32	12	49	pi_tx_data[0]
DATA[0] and keyer CWR	13	13	33	34	-	-	Ground
pi_rx_data[2]	44	19	35	36	16	46	pi_rx_data[3]
NSTATUS	9	26	37	38	20	43	pi_rx_data[1]
Ground	-	-	39	40	21	42	pi_rx_data[0]

Per function some more detailed information will be given....