Add vdev property to bypass vdev queue

Added vdev to bypass vdev queue when reading / writing from / to
vdev. The intention behind this property is to improve performance
when using o_direct.

Signed-off-by: MigeljanImeri <ImeriMigel@gmail.com>

include/sys/fs/zfs.h

@@ -375,6 +375,7 @@ typedef enum {
 	VDEV_PROP_TRIM_SUPPORT,
 	VDEV_PROP_TRIM_ERRORS,
 	VDEV_PROP_SLOW_IOS,
+	VDEV_PROP_BYPASS_QUEUE,
 	VDEV_NUM_PROPS
 } vdev_prop_t;
 

include/sys/vdev_impl.h

@@ -467,6 +467,7 @@ struct vdev {
 	uint64_t	vdev_io_t;
 	uint64_t	vdev_slow_io_n;
 	uint64_t	vdev_slow_io_t;
+	uint64_t	vdev_bypass_queue;
 };
 
 #define	VDEV_PAD_SIZE		(8 << 10)

lib/libzfs/libzfs.abi

@@ -5800,7 +5800,8 @@
       <enumerator name='VDEV_PROP_TRIM_SUPPORT' value='49'/>
       <enumerator name='VDEV_PROP_TRIM_ERRORS' value='50'/>
       <enumerator name='VDEV_PROP_SLOW_IOS' value='51'/>
-      <enumerator name='VDEV_NUM_PROPS' value='52'/>
+      <enumerator name='VDEV_PROP_BYPASS_QUEUE' value='52'/>
+      <enumerator name='VDEV_NUM_PROPS' value='53'/>
     </enum-decl>
     <typedef-decl name='vdev_prop_t' type-id='1573bec8' id='5aa5c90c'/>
     <class-decl name='zpool_load_policy' size-in-bits='256' is-struct='yes' visibility='default' id='2f65b36f'>

man/man7/vdevprops.7

@@ -156,6 +156,8 @@ If this device should perform new allocations, used to disable a device
 when it is scheduled for later removal.
 See
 .Xr zpool-remove 8 .
+.It Sy bypassqueue
+Bypass the vdev queue when reading or writing to this vdev.
 .El
 .Ss User Properties
 In addition to the standard native properties, ZFS supports arbitrary user

module/zcommon/zpool_prop.c

@@ -466,6 +466,9 @@ vdev_prop_init(void)
 	zprop_register_index(VDEV_PROP_TRIM_SUPPORT, "trim_support", 0,
 	    PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "TRIMSUP",
 	    boolean_table, sfeatures);
+	zprop_register_index(VDEV_PROP_BYPASS_QUEUE, "bypassqueue", 0,
+	    PROP_DEFAULT, ZFS_TYPE_VDEV, "on | off", "BYPASSQUEUE",
+	    boolean_table, sfeatures);
 
 	/* default index properties */
 	zprop_register_index(VDEV_PROP_FAILFAST, "failfast", B_TRUE,

module/zfs/vdev.c

@@ -6029,6 +6029,15 @@ vdev_prop_set(vdev_t *vd, nvlist_t *innvl, nvlist_t *outnvl)
 			}
 			vd->vdev_slow_io_t = intval;
 			break;
+		case VDEV_PROP_BYPASS_QUEUE:
+			if (nvpair_value_uint64(elem, &intval) != 0) {
+				error = EINVAL;
+				break;
+			}
+			if (vd->vdev_ops->vdev_op_leaf) {
+				vd->vdev_bypass_queue = intval & 1;
+			}
+			break;
 		default:
 			/* Most processing is done in vdev_props_set_sync */
 			break;
@@ -6392,6 +6401,7 @@ vdev_prop_get(vdev_t *vd, nvlist_t *innvl, nvlist_t *outnvl)
 			case VDEV_PROP_IO_T:
 			case VDEV_PROP_SLOW_IO_N:
 			case VDEV_PROP_SLOW_IO_T:
+			case VDEV_PROP_BYPASS_QUEUE:
 				err = vdev_prop_get_int(vd, prop, &intval);
 				if (err && err != ENOENT)
 					break;

module/zfs/vdev_queue.c

@@ -946,6 +946,9 @@ vdev_queue_io(zio_t *zio)
 	zio->io_flags |= ZIO_FLAG_DONT_QUEUE;
 	zio->io_timestamp = gethrtime();
 
+	if (zio->io_vd->vdev_bypass_queue)
+		return (zio);
+
 	mutex_enter(&vq->vq_lock);
 	vdev_queue_io_add(vq, zio);
 	nio = vdev_queue_io_to_issue(vq);
@@ -979,7 +982,9 @@ vdev_queue_io_done(zio_t *zio)
 	vq->vq_io_delta_ts = zio->io_delta = now - zio->io_timestamp;
 
 	mutex_enter(&vq->vq_lock);
-	vdev_queue_pending_remove(vq, zio);
+
+	if (zio->io_queue_state == ZIO_QS_ACTIVE)
+		vdev_queue_pending_remove(vq, zio);
 
 	while ((nio = vdev_queue_io_to_issue(vq)) != NULL) {
 		mutex_exit(&vq->vq_lock);

tests/runfiles/common.run

@@ -544,7 +544,7 @@ tags = ['functional', 'cli_root', 'zpool_scrub']
 [tests/functional/cli_root/zpool_set]
 tests = ['zpool_set_001_pos', 'zpool_set_002_neg', 'zpool_set_003_neg',
     'zpool_set_ashift', 'zpool_set_features', 'vdev_set_001_pos',
-    'user_property_001_pos', 'user_property_002_neg']
+    'user_property_001_pos', 'user_property_002_neg', 'vdev_set_bypassqueue']
 tags = ['functional', 'cli_root', 'zpool_set']
 
 [tests/functional/cli_root/zpool_split]

tests/zfs-tests/tests/Makefile.am

@@ -1228,6 +1228,7 @@ nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \
 	functional/cli_root/zpool_set/setup.ksh \
 	functional/cli_root/zpool/setup.ksh \
 	functional/cli_root/zpool_set/vdev_set_001_pos.ksh \
+	functional/cli_root/zpool_set/vdev_set_bypassqueue.ksh \
 	functional/cli_root/zpool_set/zpool_set_common.kshlib \
 	functional/cli_root/zpool_set/zpool_set_001_pos.ksh \
 	functional/cli_root/zpool_set/zpool_set_002_neg.ksh \

tests/zfs-tests/tests/functional/cli_root/zpool_get/vdev_get.cfg

@@ -75,4 +75,5 @@ typeset -a properties=(
     trim_support
     trim_errors
     slow_ios
+    bypassqueue
 )

tests/zfs-tests/tests/functional/cli_root/zpool_set/vdev_set_bypassqueue.ksh

@@ -0,0 +1,87 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or https://opensource.org/licenses/CDDL-1.0.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright (c) 2024 by Triad National Security, LLC.
+#
+
+. $STF_SUITE/include/libtest.shlib
+
+#
+# DESCRIPTION:
+# Toggling vdev bypassqueue property while reading from vdev should not cause panic.
+#
+# STRATEGY:
+# 1. Create a zpool
+# 2. Write a file to the pool.
+# 3. Start reading from file, while also toggling the bypassqueue property on / off.
+#
+
+verify_runnable "global"
+
+command -v fio > /dev/null || log_unsupported "fio missing"
+
+function toggle_bypassqueue 
+{
+	zpool set bypassqueue=on $TESTPOOL1 $FILEDEV
+	sleep 0.1
+	zpool set bypassqueue=off $TESTPOOL1 $FILEDEV
+	sleep 0.1
+}
+
+function cleanup
+{
+	log_must destroy_pool $TESTPOOL1
+	rm -f $FILEDEV
+}
+
+log_assert "Toggling vdev bypassqueue property while reading from vdev should not cause panic"
+log_onexit cleanup
+
+# 1. Create a pool
+
+FILEDEV="$TEST_BASE_DIR/filedev.$$"
+log_must truncate -s $(($MINVDEVSIZE * 2)) $FILEDEV
+log_must create_pool $TESTPOOL1 $FILEDEV
+
+mntpnt=$(get_prop mountpoint $TESTPOOL1)
+
+# 2. Write a file to the pool
+
+log_must eval "fio --filename=$mntpnt/foobar --name=write-file \
+		--rw=write --size=$MINVDEVSIZE --bs=128k --numjobs=1 --direct=1 \
+		--ioengine=sync --runtime=10"
+
+# 3. Starting reading from file, while also toggling the bypassqueue property on / off.
+
+log_must eval "fio --filename=$mntpnt/foobar --name=read-file \
+		--rw=read --size=$MINVDEVSIZE --bs=128k --numjobs=1 --direct=1 \
+		--ioengine=sync --time_based --runtime=10 &"
+
+ITERATIONS=30
+
+for i in $(seq $ITERATIONS); do
+	log_must toggle_bypassqueue
+done;
+wait
+
+log_pass "Toggling vdev bypassqueue property while reading from vdev does not cause panic"