Unable to edit Water Use Equipment Definition

[Ski90Moo]

Issue overview

The water use equipment definition is not showing properly on the loads tab. Unable to edit the definition:

Current Behavior

Expected Behavior

Steps to Reproduce

Possible Solution

Details

Environment

Some additional details about your environment for this issue (if relevant):

• Platform (Operating system, version):
  

• Version of OpenStudioApplication (if using an intermediate build, include SHA):
  

Context

[macumber]

Thanks @Ski90Moo, I am seeing this too, I will look into it

[macumber]

@Ski90Moo I think I found the cause of this, it was a too aggressive optimization I made for 1.7.0. I have a PR to fix this, we may include it in a 1.7.1 release. Would you be able to verify it is fixed in one of the local builds here: https://github.com/openstudiocoalition/OpenStudioApplication/actions/runs/8135210957?pr=685 ?

[Ski90Moo]

Hi Dan, sorry, just now getting to this. I do not know how to do what you are requesting.

…

On Mon, Mar 4, 2024 at 4:45 AM Dan Macumber ***@***.***> wrote: @Ski90Moo <https://github.com/Ski90Moo> I think I found the cause of this, it was a too aggressive optimization I made for 1.7.0. I have a PR to fix this, we may include it in a 1.7.1 release. Would you be able to verify it is fixed in one of the local builds here: https://github.com/openstudiocoalition/OpenStudioApplication/actions/runs/8135210957?pr=685 ? — Reply to this email directly, view it on GitHub <#683 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQUKBFDCPTKCYV6YN4TQKNLYWP37LAVCNFSM6AAAAABD5YZUOGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZVGY4TKOJVGE> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

-- Best Regards, Mike Lovejoy P.E. Helix Energy Partners LLC Helix, OR http://www.helix-engineers.net/ <https://deref-mail.com/mail/client/aJLmMsp2k0Y/dereferrer/?redirectUrl=http%3A%2F%2Fwww.helix-engineers.net%2F> P:541-379-0271

[macumber]

Hey @Ski90Moo no problem. I have a potential fix for this issue, before I merge it in I was hoping you could install a test build and see if it fixes your issue? The test builds are at the bottom of this page: https://github.com/openstudiocoalition/OpenStudioApplication/actions/runs/8308713967?pr=685

Here is a direct link to the Windows installer: https://github.com/openstudiocoalition/OpenStudioApplication/actions/runs/8308713967/artifacts/1331994577

[Ski90Moo]

Ok, looks good. I don't know if it matters, but when I want to replace the target temperature schedule or fraction schedules, I cannot simply drag in a new schedule. I have to click the delete "x" icon first, then drag in a new one. For internal mass definition, I am able to simply drag in the construction and it will be replaced.

[jmarrec]

@Ski90Moo I can reproduce the "non-draggable" behavior. Thanks for reporting it. I'll fix it shortly.

[jmarrec]

2b68136 cf demo GIF on the PR at #685 (comment)

[Ski90Moo]

This appears to be a problem with editing materials as well. I cannot edit window and glazing materials:

[jmarrec]

@Ski90Moo yeah, it's the same root cause, #685 fixes it (I just tested with the installers on https://github.com/openstudiocoalition/OpenStudioApplication/actions/runs/8343966468?pr=685 )