Skip to content

opencast/oc-config-management

 
 

Repository files navigation

Quickstart

  • Ansible 2.6.18 or newer
  • Supported Distributions
    • Debian 9+
    • Ubuntu 16.04+
    • CentOS 7+
    • Red Hat 7+
  • Python 3 on the target nodes

These playbooks deploy a full Opencast cluster, from packages. To use them, first edit the hosts inventory file to contain the hostnames of the machines on which you want Opencast deployed, and edit group_vars/all.yml to set any parameters you might want. Prior to running the playbook you need to install the dependency roles. This can be done with:

ansible-galaxy install -r requirements.yml

Then run the playbook, like this:

ansible-playbook -K -i hosts opencast.yml

When the playbook run completes, you should be able to see Opencast on port 80, on the target machines.

This playbook is not meant to deploy production machines as is, instead use it to form the basis of a playbook which better matches your local needs and infrastructure.

Detailed Docs

Playbooks

There are four playbooks:

  • opencast.yml: This playbook installs and configures Opencast on a fresh machine. This is probably the playbook you are here for.
  • opencast-source.yml: This playbook installs and configures Opencast on a fresh machine, then replaces the install with a tarball's contents. Assumes the tarballs is downloaded from the Opencast CI system, set the build hash with source_tarball_hash. Generally not what you want for production use, but can be useful for testing pull requests against your environment.
  • config.yml: This playbook is used to reconfigure an Opencast install. Run opencast.yml first, then config.yml when you need to change configurations.
  • uninstall.yml: This playbook uninstalls the Opencast packages, but leaves the third party tools, and your data alone.
  • reset.yml: DANGER This playbook resets Opencast back to its initial state. It removes all Opencast user data, but leaves the packages installed. This is only useful for testing situations, and will happily wipe out your production data without further prompting.

Hints:

  • Running reset.yml config.yml resets the database, filesystem, and ensures all of your config files are in the expected state, then restarts Opencast.
  • If you are switching between Opencast versions when testing, first run uninstall.yml to remove the packages, then checkout the correct branch of these playbooks. Then run opencast.yml reset.yml to install and reset. Without the reset tag you will see an error when the database is imported because the schema will already exist.
  • If you are testing a CI system you can combine the above as uninstall.yml opencast.yml reset.yml to uninstall the current version, reinstall the same branch (but likely new build), and clear the database and storage system before restarting Opencast.

Hosts

To begin, we first must first change the hosts file to match our environment. Each play (e.g: [fileserver]) can have between zero and N hosts associated with it. A given host can also be associated with multiple playbooks. In the default hosts file we see that the admin.example.org host will play the role of the fileserver, database server, and admin node. We also see that the ingest playbook has no hosts associated - that means that it will not be used. These scripts do not have a way to define dependencies between playbooks, which means (as an example) that you can deploy a cluster without an admin node, which is an invalid configuration. Keep this in mind when defining your host environment! At this point, please change the hosts to match your environment.

Host list requirements:

  • fileserver: At most 1 host. With 2 or more hosts only the first will be used. 0 hosts disables the fileserver and only makes sense of you are just building an allinone host.
  • database: Exactly 1 host. With 2 or more hosts only the first will be used, with 0 hosts you will encounter errors.
  • opensearch: Exactly 1 host. With 2 or more hosts only the first will be used, with 0 hosts you will encounter errors.
  • allinone, admin, adminpresentation: At most 1 host in all of these groups combined. The admin node used by the cluster is defined by the first entry of the admin_node group. This means that if you define an a host under admin, and a host under adminpresentation then the cluster will use the host under admin.
  • allinone, presentation, adminpresentation: At most 1 host in all of these groups combined. The presentation node used by the cluster is defined by the first entry of the presentation_node group. This means that if you define a host under presentation, and a host under adminpresentation then the cluster will use the host under presentation.
  • allinone, worker: At least 1 host in at least one of these groups. There are no outright errors if you deploy a cluster without any workers, but Opencast will be unable to process any recordings. In general this is a useless configuration, unless you are strictly testing configuration files.

Host configuration for these scripts:

  • A shared user (by default named ansible) who accepts your SSH key, has sudo access, and either no password (for passwordless sudo) or the same password on all nodes in hosts.

Configuration Hints:

  • The most common production configuration is a single admin, single presentation, and N workers.
  • Decide where you want your admin and presentation nodes first. Once media has been processed, it's very difficult to change the admin and presentation hostnames.
  • Opencast uses the hostname as defined in the hosts file. Use the externally resolvable name (ie, admin.example.org, rather than just admin), otherwise you will encounter problems in the future.

Variables

Most variables are exposed in the group_vars/all.yml and group_vars/opencast.yml files. These files should be well documented, so please take a look.

Troubleshooting

  • My install fails with an error complaining that the SEQUENCE table already exists

You already have some data in the schema you are installing to. This might be pre-existing Opencast data, so we fail the install rather than potentially overwrite your data. If you are sure you want to overwrite it, use the reset tag after reading the caveat in the Advanced Usage section below.

  • My install fails complaining that a package could not be installed

Try again in a day or so. If you are particularly unlucky you might have caught us updating the repository, or there might be an issue with your distribution's mirroring systems. If this does not resolve itself in a day please complain on list!

Known issues for production use

  • These playbooks ship with the default upstream Opencast credentials. These must be changed for production use.
  • ActiveMQ is left in a world-connectable state. Setup a firewall between your ActiveMQ node and the untrusted network.
  • NFS is restricted to the hosts involved in the playbook, but does not have any other security in place and is running in version 3.
  • HTTPS configuration is possible (oc_protocol in group_vars/opencast.yml), however these playbooks do not cover setting up and issuing certificates.
  • Opensearch authentication data is populated on the Opencast side, but does not automatically configure the users on the Opensearch server. This is configuration requires SSL connections, which are currently beyond the scope of these playbooks.

Ideas for Improvement

Here are some ideas for ways that these playbooks could be extended:

  • Enable Solr clustering for relevant services
  • Enable Elastic Search server clustering for relevant services
  • Add security to various installed services to prevent them from being world accessible (see above)
  • Multiple tenant support
  • Error checking for group settings. You can define insane configurations such as multiple admin nodes, or clusters without ActiveMQ.

Advanced Usage

Using other repositories

It is possible to use other repositories (ie, internal testing repositories) with these playbooks. You will need to override a few variables.

For Debian based systems:

  • deb_repo_suite needs to be the repository suite (ie, unstable)
  • oc_deb_repo_url needs to be the full URL to the repository base (ie, http://ci.opencast.org/debian)
  • oc_deb_key_url needs to be the full URL to the repository signing key (ie, https://pkg.opencast.org/gpgkeys/automated.key)
  • oc_deb_key_id needs to be the signing key's id (ie, 048D039F1DAE53EA0357ED824917F260EA15B53F)

For RedHat based systems:

  • rpm_repo_suite needs to be the repository suite (ie, unstable)
  • oc_rpm_repo_url needs to be the full URL to the repository base (ie, http://ci.opencast.org/rpms)
  • oc_rpm_key_url needs to be the full URL to the repository signing key (ie, https://pkg.opencast.org/gpgkeys/automated.key)
  • oc_rpm_key_id needs to be the signing key's id (ie, 048D039F1DAE53EA0357ED824917F260EA15B53F)

Tags

The playbook contains tags, which cause Ansible to only execute part of the full playbook. These tags are currently:

  • config, which updates all of the configuration files created by this playbook, then restarts Opencast. Don't do this on your production system, figure out the correct settings on your test instance then reinstall for production.
  • opencast, which does all of the steps for installing Opencast, and Opencast alone. Use this if you're testing packaging and you are confident that the rest of the system (NFS mounts, etc) is properly configured.
  • uninstall, which removes all Opencast packages, even if they do not match the currently checked out branch.
  • DANGER reset, which removes all Opencast user data, but leaves the packages installed. This is only useful for testing situations, and will happily wipe out your production data without further prompting.

Hints:

  • Running --tags config,reset resets the database, filesystem, and ensures all of your config files are in the expected state, then restarts Opencast.
  • If you are switching between Opencast versions when testing, first run --tags uninstall to remove the packages, then checkout the correct branch of these playbooks. Then run --tags opencast,reset to install and reset. Without the reset tag you will see an error when the database is imported because the schema will already exist.
  • If you are testing a CI system you can combine the above as --tags uninstall,opencast,reset to uninstall the current version, reinstall the same branch (but likely new build), and clear the database and storage system before restarting Opencast.

About

Ansible scripts to deploy Opencast packages

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 100.0%