Skip to content
Joel Stanley edited this page Mar 25, 2019 · 9 revisions

This contains a list of the out-of-tree patches that are being carried according to the DevelopmentProcess.

The current tree is based on 5.0. Note that this page is currently out of date (based on 4.10 kernel).

#00ff00 Green

These patches are being carried for their first cycle. It is expected that at this time they are being reviewed by upstream.

SHA Description
7b68fa8dc6a3 ipmi: bt-bmc: Add ast2500 compatible string
f26f7746e487 ARM: dts: aspeed: Add Palmetto hogs
e03a108881a7 ARM: configs: aspeed: Bring in configs
8b48f6a66936 rtc: Add Aspeed AST2400 rtc driver
969ba225f4bc drivers/serial: Add driver for Aspeed virtual UART
a34553c1cb94 drivers/mailbox: Add Aspeed mailbox driver
59660164aaf6 ARM: dts: aspeed: add a fastread property
a6bff367967f mtd: spi-nor: aspeed: remove dummies from keep mask
c0f3b4a2c0f0 mtd: spi-nor: add SPI_NOR_DUAL_READ to some flash devices
efafde5ff968 mtd: spi-nor: Add support for Macronix mx66l1g45g spi flash
495b177ff93a mtd: spi-nor: aspeed: add support for SPI dual IO read mode
629b0f8b53aa mtd: spi-nor: aspeed: add DMA support
5150ec64cab9 ARM: dts: aspeed: update spi controller bindings
0af38969aef4 ARM: dts: aspeed: Move clocks under SCU node
268b33502ccb clk: aspeed: Add driver for uart clock
daa3017a3ed3 clk: aspeed: Add clock driver for g5 clocks
5fb4c67fd4e1 clk: aspeed: Add clock driver for g4 clocks
77bdb70c2125 clk: Add Aspeed common code
af6a9053c0f8 i2c: Add driver for Aspeed i2c master
901e83964514 ARM: dts: Add Aspeed BMC device trees
155a240f7827 ARM: aspeed: add debugfs entries to print controller registers
b31867e28ead ARM: aspeed: Add board file

#ffa500 Orange

These patches are being carried for their second cycle. It is expected they are close to being merged upstream.

Patch Author Date of inclusion
None

#ff0000 Red

These patches are being carried for their third cycle, and will not be considered for inclusion again.

Patch Author Date of inclusion
None

Backports

These patches are in the upstream maintainers tree, or Linus tree, but are not in a release yet.

SHA Description
0e81eb77f5f8 ARM: configs: Update Aspeed with new drivers
d90722795e9b ARM: dts: aspeed-g4: Add syscon and pin controller nodes
09955007b2f6 ARM: dts: aspeed-g4: Add gpio controller to devicetree
daf042580a0d ARM: dts: aspeed-g5: Add SoC Display Controller node
cec822f89ec1 ARM: dts: aspeed-g5: Add LPC Controller node
b590c8d2eed5 ARM: dts: aspeed-g5: Add syscon and pin controller nodes
2039f90d136c ARM: dts: aspeed-g5: Add gpio controller to devicetree
e53a7f1b998d ARM: dts: aspeed: Reserve framebuffer memory
9b08d4506cf8 ARM: dts: aspeed: Correct palmetto device tree
34ea5c9de39b ARM: dts: aspeed: Add ftgmac100 to g4 and g5 platforms
8f9bafbb92c0 ARM: dts: aspeed: Add Romulus BMC platform
43c08c1c1ae5 ARM: aspeed: Select pinctrl drivers
7153f8ef679d gpio: aspeed: Make bank names strings
1736f75d35e4 gpio: aspeed: Add banks Y, Z, AA, AB and AC
619e96f4bf9d gpio: aspeed: Remove dependence on GPIOF_* macros
c95b0fec3cff pinctrl: aspeed: dt: Fix compatibles for the System Control Unit
7d29ed88acbb pinctrl: aspeed: Read and write bits in LPC and GFX controllers
6d329f14a75f pinctrl: aspeed-g4: Add mux configuration for all pins
f1337856dd88 pinctrl: aspeed-g5: Add mux configuration for all pins
b75dd8722e17 pinctrl: aspeed: Fix kerneldoc return descriptions
8ccb6dc6e999 pinctrl: aspeed: g4: Fix mux configuration for GPIOs AA[4-7], AB[0-7]
ceb720c71b63 mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoC
e56beebbc734 mtd: aspeed: add memory controllers for the Aspeed AST2400 SoC
28309572aac4 mtd: name the mtd device with an optional label property
2bfc74527426 dt-bindings: mtd: add a common label property to all mtd devices
f40a2725ea72 mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()
d91f6cee98b6 mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()
Clone this wiki locally