Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[chore] Fix flaky test in filelog receiver #35012

Merged
merged 1 commit into from
Sep 4, 2024
Merged

[chore] Fix flaky test in filelog receiver #35012

merged 1 commit into from
Sep 4, 2024

Conversation

djaglowski
Copy link
Member

Quick fix for #35007.

Ideally we should not need to depend on order of files returned from the finder but there are apparently some subtle implications which need to be better understood before we remove the assumption.

@BinaryFissionGames
Copy link
Contributor

Side note, I think we could probably rework the deduping a bit here to do a sorted list merge if we know that the output of the glob function is guaranteed to be sorted. I couldn't find that guarantee anywhere in writing though, so I avoided it.

@djaglowski djaglowski marked this pull request as ready for review September 4, 2024 17:34
@djaglowski djaglowski requested review from a team and andrzej-stencel September 4, 2024 17:34
@TylerHelmuth TylerHelmuth merged commit 548d95f into open-telemetry:main Sep 4, 2024
159 checks passed
@github-actions github-actions bot added this to the next release milestone Sep 4, 2024
@djaglowski djaglowski deleted the filelog-flaky-order branch September 4, 2024 17:49
This was referenced Sep 4, 2024
Closed
Closed
narcis96 added a commit to Huawei-IRC-Cloud-Telemetry-Engineering/opentelemetry-collector-contrib that referenced this pull request Sep 10, 2024
@narcis96 @mmorel-35
@TylerHelmuth @crobert-1 @bacherfl @mx-psi @adrielp @andrzej-stencel @codeboten @atoulme @MovieStoreGuy @CharlieTLe @Frapschen @lhns @renovate @opentelemetrybot @cyrille-leclerc @sandeepsukhani @iblancasa @rpax @jpkrohling @BominRahmani @songy23 @BinaryFissionGames @knarfli @VihasMakwana @pjanotti @gjtorikian @matej-g @evan-bradley @ArthurSens @jerrytfleung @Grandys @cxdy @djaglowski @rogercoll @dependabot @dashpole @carsonip @sh0rez @wildum @dpaasman00 @kaisecheng @mwear @jmacd @JaredTan95 @abhishek-at-cloudwerx @SamerJ @edmocosta @odubajDT @thmshmm @alexgreenbank @carrieedwards @fedetorres93 @krajorama @liustanley @mackjmr
Merge remote-tracking branch 'upstream/main' (#45)
ae89f69 
* [chore]: enable bool-compare rule from testifylint (#34912)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[bool-compare](https://github.com/Antonboom/testifylint?tab=readme-ov-file#bool-compare)
rule from [testifylint](https://github.com/Antonboom/testifylint)

It's linter provided by golangci-lint.

Here all available rules are activated except those who require to be
fixed. This PR only fixes bool-compare so the quantity of changes stays
reasonnable for reviewers.

Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>

* [pkg/ottl] Remove tracing from OTTL (#34910)

**Description:** 
Reverts
https://github.com/open-telemetry/opentelemetry-collector-contrib/pull/33508
since it was causing performance issues

**Link to tracking Issue:** <Issue number if applicable>
Reopens
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/33433
Related to
https://github.com/open-telemetry/opentelemetry-collector/issues/10858
Closes
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34890

* [chore]: enable len rule from testifylint (#34921)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[len](https://github.com/Antonboom/testifylint?tab=readme-ov-file#len)
rule from [testifylint](https://github.com/Antonboom/testifylint)

* [chore][receiver/nginx] Update README for consistency (#34923)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
This just cleans up the README a bit:
1. Make case of `NGINX` consistent. Happy to change it to `nginx` if
that's preferred.
2. Remove empty `Details` section
3. Cleanup description of the `collection_interval` config option. This
is the same config option many other receivers have, so I don't think
the concept needs explained in-depth here.
4. Remove disclaimer that the component's status is beta and
configuration is subject to change. The README's header states this
component is beta, so I don't think it needs to be repeated.

* [processor/redaction] add support for redacting metrics and logs attributes (#34609)

**Description:** This PR extends the redaction processor to also support
the redaction of attributes within logs and metrics.

**Link to tracking Issue:** #34479 

**Testing:** Extended the existing unit tests to also cover the
redaction of logs and metrics

**Documentation:** Adapted the readme to reflect the changes

---------

Signed-off-by: Florian Bacher <florian.bacher@dynatrace.com>

* [chore] Fix linter issues (#34937)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->

#34609 and #34921 conflicted. This fixes CI

* [receiver/gitproviderreceiver] rename to githubreceiver (#34731)

**Description:** <Describe what has changed.>
Renames `gitproviderreceiver` to `githubreceiver` to better align with
OpenTelemetry Semantic Conventions v1.27.0+ and allow for tracing and
log signals in the future.

---------

Co-authored-by: Andrzej Stencel <andrzej.stencel@elastic.co>
Co-authored-by: Pablo Baeyens <pbaeyens31+github@gmail.com>

* [chore][CODEOWNERS] Change account references to match new username (#34929)

[Failing CI/CD
action](https://github.com/open-telemetry/opentelemetry-collector-contrib/actions/runs/10616610306/job/29427492169#step:16:13)

Failure output:

```
cd cmd/githubgen && go install .
githubgen
2024/08/2[9](https://github.com/open-telemetry/opentelemetry-collector-contrib/actions/runs/10616610306/job/29427492169#step:16:10) 14:07:14 codeowners are not members: kkujawa-sumo
make: *** [Makefile:296: gengithub] Error 1
```

It appears that the user @kkujawa-sumo has been renamed to
@kasia-kujawa. This updates all references to resolve our code owners
check to ensure all code owners are members of the OpenTelemetry
organization.

* [chore] refactor filter processor test to use generated test harness (#34940)

The code in telemetry_test.go was mostly doing something the code
generated by mdatagen was doing. Updated the tests to use that instead.

Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>

* [chore] use generated test harness for groupbyattrs processor (#34941)

Like
https://github.com/open-telemetry/opentelemetry-collector-contrib/pull/34940
but for the groupsbyattrs processor.

Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>

* [chore] update core to pull in telemetry settings changes (#34930)

Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>

* [receiver/splunkhec] fix memory leak (#34911)

**Description:** 
Fix memory leak when the receiver is used for both metrics and logs at
the same time

**Link to tracking Issue:** <Issue number if applicable>
Fixes #34886

* [chore] Updating @MovieStoreGuy affiliation (#34947)

* [chore]: Update README.md (#34725)

Alolita Sharma works at Apple now. :)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->

**Link to tracking Issue:** <Issue number if applicable>

**Testing:** <Describe what testing was performed and which tests were
added.>

**Documentation:** <Describe the documentation added.>

* [connector/servicegraph]Fix incorrectly reversed latency settings(resolve #34562 unit fail) (#34933)

**Description:** <Describe what has changed.>
This PR resolves the #34562 unit failure and adds back this bugfix after
revert #34865.

* [chore]: enable error-nil and nil-compare rules from testifylint (#34936)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[error-nil](https://github.com/Antonboom/testifylint?tab=readme-ov-file#error-nil)
and
[nil-compare](https://github.com/Antonboom/testifylint?tab=readme-ov-file#nil-compare)
rules from [testifylint](https://github.com/Antonboom/testifylint)


It also adds testifylint as tool to use with a make command

* [connector/count] fix typo in metric.datapoint.count (#34961)

**Documentation:** The documentation mentions a metric called
"metric.data_point.count" but the metric is actually called
"metric.datapoint.count"

Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [chore] Upgrade arvo package (#34962)

**Description:** 

Upgrading the arvo package used, it appears to be causing build issues
on integer overflows

* Update module github.com/shirou/gopsutil/v4 to v4.24.8 (#34970)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/shirou/gopsutil/v4](https://redirect.github.com/shirou/gopsutil)
| `v4.24.7` -> `v4.24.8` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.7/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.7/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>shirou/gopsutil (github.com/shirou/gopsutil/v4)</summary>

###
[`v4.24.8`](https://redirect.github.com/shirou/gopsutil/releases/tag/v4.24.8)

[Compare
Source](https://redirect.github.com/shirou/gopsutil/compare/v4.24.7...v4.24.8)

<!-- Release notes generated using configuration in .github/release.yml
at v4.24.8 -->

#### What's Changed

##### disk

- fix(IOCountersWithContext): Fix the issue of not using names to fil
ter devices in func IOCountersWithContext of the windows implementation
by [@&#8203;zmyzheng](https://redirect.github.com/zmyzheng) in
[https://github.com/shirou/gopsutil/pull/1688](https://redirect.github.com/shirou/gopsutil/pull/1688)
- \[disk]\[windows]: ignore network drive when not ready by
[@&#8203;shirou](https://redirect.github.com/shirou) in
[https://github.com/shirou/gopsutil/pull/1699](https://redirect.github.com/shirou/gopsutil/pull/1699)

##### process

- Fix parsing of /proc/pid/smaps when path is empty by
[@&#8203;pgimalac](https://redirect.github.com/pgimalac) in
[https://github.com/shirou/gopsutil/pull/1691](https://redirect.github.com/shirou/gopsutil/pull/1691)
- Refactoring the algorithm for calculating CPU usage by
[@&#8203;TheBestLL](https://redirect.github.com/TheBestLL) in
[https://github.com/shirou/gopsutil/pull/1692](https://redirect.github.com/shirou/gopsutil/pull/1692)
- Fix panic on OpenBSD and FreeBSD systems if KinfoProc size has an
unexpected size by
[@&#8203;fivitti](https://redirect.github.com/fivitti) in
[https://github.com/shirou/gopsutil/pull/1694](https://redirect.github.com/shirou/gopsutil/pull/1694)

##### Other Changes

- Fix badge link in README.md by
[@&#8203;Yurunsoft](https://redirect.github.com/Yurunsoft) in
[https://github.com/shirou/gopsutil/pull/1695](https://redirect.github.com/shirou/gopsutil/pull/1695)
- fix golangcilint errors, ignore gosec G115 by
[@&#8203;shirou](https://redirect.github.com/shirou) in
[https://github.com/shirou/gopsutil/pull/1697](https://redirect.github.com/shirou/gopsutil/pull/1697)
- fix: golangci lint with max -> maxConn by
[@&#8203;shirou](https://redirect.github.com/shirou) in
[https://github.com/shirou/gopsutil/pull/1693](https://redirect.github.com/shirou/gopsutil/pull/1693)

#### New Contributors 🎉

- [@&#8203;zmyzheng](https://redirect.github.com/zmyzheng) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1688](https://redirect.github.com/shirou/gopsutil/pull/1688)
- [@&#8203;Yurunsoft](https://redirect.github.com/Yurunsoft) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1695](https://redirect.github.com/shirou/gopsutil/pull/1695)
- [@&#8203;pgimalac](https://redirect.github.com/pgimalac) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1691](https://redirect.github.com/shirou/gopsutil/pull/1691)
- [@&#8203;TheBestLL](https://redirect.github.com/TheBestLL) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1692](https://redirect.github.com/shirou/gopsutil/pull/1692)
- [@&#8203;fivitti](https://redirect.github.com/fivitti) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1694](https://redirect.github.com/shirou/gopsutil/pull/1694)

**Full Changelog**:
https://github.com/shirou/gopsutil/compare/v4.24.7...v4.24.8

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* Update module github.com/ClickHouse/clickhouse-go/v2 to v2.28.2 (#34968)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/ClickHouse/clickhouse-go/v2](https://redirect.github.com/ClickHouse/clickhouse-go)
| `v2.28.1` -> `v2.28.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.1/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.1/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>ClickHouse/clickhouse-go
(github.com/ClickHouse/clickhouse-go/v2)</summary>

###
[`v2.28.2`](https://redirect.github.com/ClickHouse/clickhouse-go/blob/HEAD/CHANGELOG.md#v2282-2024-08-30----Release-notes-generated-using-configuration-in-githubreleaseyml-at-main---)

[Compare
Source](https://redirect.github.com/ClickHouse/clickhouse-go/compare/v2.28.1...v2.28.2)

#### What's Changed

##### Fixes 🐛

- Validate connection in bad state before query execution in the stdlib
database/sql driver by
[@&#8203;jkaflik](https://redirect.github.com/jkaflik) in
[https://github.com/ClickHouse/clickhouse-go/pull/1396](https://redirect.github.com/ClickHouse/clickhouse-go/pull/1396)

##### Other Changes 🛠

- Update README with newer Go versions by
[@&#8203;jkaflik](https://redirect.github.com/jkaflik) in
[https://github.com/ClickHouse/clickhouse-go/pull/1393](https://redirect.github.com/ClickHouse/clickhouse-go/pull/1393)

**Full Changelog**:
https://github.com/ClickHouse/clickhouse-go/compare/v2.28.1...v2.28.2

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* Update All github.com/datadog packages to v0.56.2 (#34965)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/DataDog/datadog-agent/comp/core/config](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/core/hostname/hostnameinterface](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/core/log](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/logs/agent/config](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/logsagentpipeline](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/logsagentpipeline/logsagentpipelineimpl](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/otlp/components/exporter/logsagentexporter](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/otlp/components/metricsclient](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/otlp/components/statsprocessor](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/trace/compression/impl-gzip](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/config/model](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/config/setup](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/logs/sources](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/obfuscate](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/proto](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/trace](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/util/hostname/validate](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* Update module github.com/snowflakedb/gosnowflake to v1.11.1 (#34971)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/snowflakedb/gosnowflake](https://redirect.github.com/snowflakedb/gosnowflake)
| `v1.11.0` -> `v1.11.1` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.0/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.0/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>snowflakedb/gosnowflake
(github.com/snowflakedb/gosnowflake)</summary>

###
[`v1.11.1`](https://redirect.github.com/snowflakedb/gosnowflake/releases/tag/v1.11.1):
Release

[Compare
Source](https://redirect.github.com/snowflakedb/gosnowflake/compare/v1.11.0...v1.11.1)

- Please check Snowflake [community page for release
notes](https://docs.snowflake.com/en/release-notes/clients-drivers/golang).

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* [exporter/loki] Document the migration from the Loki Exporter to the Loki V3 OTLP endpoint (#34918)

**Description:** <Describe what has changed.>

Document how to migrate from the now deprecated OTel Collector Loki
Exporter to the new Loki V3 OTLP endpoint and new OTel log format

---------

Co-authored-by: Curtis Robert <crobert@splunk.com>
Co-authored-by: Sandeep Sukhani <sandeep.d.sukhani@gmail.com>

* [connector/spanmetrics] Improve consistency between metrics generated by spanmetricsconnector (#34485)

**Link to tracking Issue:** #33227 #32818

**Documentation:** added an entry to the changelog explaining the
deprecated metrics.

---------

Signed-off-by: Israel Blancas <iblancasa@gmail.com>
Signed-off-by: Juraci Paixão Kröhling <juraci@kroehling.de>
Co-authored-by: Murphy Chen <minquan.chen@daocloud.io>
Co-authored-by: Rafael Pax <rpax@users.noreply.github.com>
Co-authored-by: Juraci Paixão Kröhling <juraci@kroehling.de>

* Update module google.golang.org/grpc to v1.66.0 (#34978)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
| [google.golang.org/grpc](https://redirect.github.com/grpc/grpc-go) |
`v1.65.0` -> `v1.66.0` |
[![age](https://developer.mend.io/api/mc/badges/age/go/google.golang.org%2fgrpc/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/google.golang.org%2fgrpc/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/google.golang.org%2fgrpc/v1.65.0/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/google.golang.org%2fgrpc/v1.65.0/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>grpc/grpc-go (google.golang.org/grpc)</summary>

###
[`v1.66.0`](https://redirect.github.com/grpc/grpc-go/releases/tag/v1.66.0):
Release 1.66.0

[Compare
Source](https://redirect.github.com/grpc/grpc-go/compare/v1.65.0...v1.66.0)

### New Features

- metadata: stabilize `ValueFromIncomingContext`
([#&#8203;7368](https://redirect.github.com/grpc/grpc-go/issues/7368))
- Special Thanks:
[@&#8203;KarthikReddyPuli](https://redirect.github.com/KarthikReddyPuli)
- client: stabilize the `WaitForStateChange` and `GetState` methods,
which were previously experimental.
([#&#8203;7425](https://redirect.github.com/grpc/grpc-go/issues/7425))
- xds: Implement ADS flow control mechanism
([#&#8203;7458](https://redirect.github.com/grpc/grpc-go/issues/7458))
- See
[https://github.com/grpc/grpc/issues/34099](https://redirect.github.com/grpc/grpc/issues/34099)
for context.
- balancer/rls: Add metrics for data cache and picker internals
([#&#8203;7484](https://redirect.github.com/grpc/grpc-go/issues/7484),
[#&#8203;7495](https://redirect.github.com/grpc/grpc-go/issues/7495))
- xds: LRS load reports now include the `total_issued_requests` field.
([#&#8203;7544](https://redirect.github.com/grpc/grpc-go/issues/7544))

### Bug Fixes

- grpc: Clients now return status code INTERNAL instead of UNIMPLEMENTED
when the server uses an unsupported compressor. This is consistent with
the [gRPC compression
spec](https://redirect.github.com/grpc/grpc/blob/master/doc/compression.md#compression-method-asymmetry-between-peers).
([#&#8203;7461](https://redirect.github.com/grpc/grpc-go/issues/7461))
- Special Thanks:
[@&#8203;Gayathri625](https://redirect.github.com/Gayathri625)
- transport: Fix a bug which could result in writes busy looping when
the underlying `conn.Write` returns errors
([#&#8203;7394](https://redirect.github.com/grpc/grpc-go/issues/7394))
- Special Thanks: [@&#8203;veshij](https://redirect.github.com/veshij)
- client: fix race that could lead to orphaned connections and
associated resources.
([#&#8203;7390](https://redirect.github.com/grpc/grpc-go/issues/7390))
- xds: use locality from the connected address for load reporting with
pick_first
([#&#8203;7378](https://redirect.github.com/grpc/grpc-go/issues/7378))
- without this fix, if a priority contains multiple localities with
pick_first, load was reported for the wrong locality
- client: prevent hanging during ClientConn.Close() when the network is
unreachable
([#&#8203;7540](https://redirect.github.com/grpc/grpc-go/issues/7540))

### Performance Improvements

- transport: double buffering is avoided when using an http connect
proxy and the target server waits for client to send the first message.
([#&#8203;7424](https://redirect.github.com/grpc/grpc-go/issues/7424))
- codec: Implement a new `Codec` which uses buffer recycling for encoded
message
([#&#8203;7356](https://redirect.github.com/grpc/grpc-go/issues/7356))
- introduce a `mem` package to facilitate buffer reuse
([#&#8203;7432](https://redirect.github.com/grpc/grpc-go/issues/7432))
- Special Thanks:
[@&#8203;PapaCharlie](https://redirect.github.com/PapaCharlie)

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* [vcenterreceiver] Updated units on several metrics (#34946)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
The following change works to update several metrics units to be more
inline with the semantics declared here:
https://opentelemetry.io/docs/specs/semconv/general/metrics/#instrument-units
Specifically it changes all the uses of `sec` to `s` and also updates
the incorrect unit usage of `{MHz}` to `MHz` on a couple metrics.

**Link to tracking Issue:** <Issue number if applicable>

**Testing:** <Describe what testing was performed and which tests were
added.>
All golden package tests were updated, as well as integration tests.

**Documentation:** <Describe the documentation added.>
Documentation was updated with mdatagen with the use of `make generate`

* Update module github.com/SAP/go-hdb to v1.12.0 (#34973)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
| [github.com/SAP/go-hdb](https://redirect.github.com/SAP/go-hdb) |
`v1.11.3` -> `v1.12.0` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fSAP%2fgo-hdb/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fSAP%2fgo-hdb/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fSAP%2fgo-hdb/v1.11.3/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fSAP%2fgo-hdb/v1.11.3/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>SAP/go-hdb (github.com/SAP/go-hdb)</summary>

###
[`v1.12.0`](https://redirect.github.com/SAP/go-hdb/blob/HEAD/RELEASENOTES.md#v1120)

[Compare
Source](https://redirect.github.com/SAP/go-hdb/compare/v1.11.3...v1.12.0)

##### Changes

- Changed 'prometheus' into own go module to reduce dependencies on
go-hdb.

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>
Co-authored-by: Yang Song <songy23@users.noreply.github.com>

* [chore][pkg/stanza] Speed up file deduplication in finder (#34888)

**Description:** <Describe what has changed.>
For large numbers of files, the logic that deduplicates the filenames
between matches is costly. This is mainly due to the O(n^2) deduping
algorithm used. If we instead use a map (as a hashset), we can make this
~O(n).

This PR speeds up the deduplication logic, as well as adds a benchmark
for a case where the filelog receiver is polling many files at once.

**Testing:** <Describe what testing was performed and which tests were
added.>

Running the added benchmark and comparing with benchstat, we can see a
large increase in speed for the large number of files case (10000
monitored files), at the cost of a very slight increase in memory usage:
```
goos: darwin
goarch: arm64
pkg: github.com/open-telemetry/opentelemetry-collector-contrib/pkg/stanza/fileconsumer/matcher/internal/finder
cpu: Apple M3 Pro
                │    old.txt    │               new.txt               │
                │    sec/op     │    sec/op     vs base               │
Find10kFiles-12   198.636m ± 6%   8.696m ± 16%  -95.62% (p=0.002 n=6)

                │   old.txt    │              new.txt               │
                │     B/op     │     B/op      vs base              │
Find10kFiles-12   5.416Mi ± 0%   5.581Mi ± 0%  +3.04% (p=0.002 n=6)

                │   old.txt   │              new.txt              │
                │  allocs/op  │  allocs/op   vs base              │
Find10kFiles-12   80.06k ± 0%   80.25k ± 0%  +0.23% (p=0.002 n=6)
```

* [receiver/mysql] client, convert NULL to int64 (#34411)

**Description:** <Describe what has changed.>
bug fix, receiver/mysql client.go raise error when the TABLE_ROWS column
is NULL,
fix it in the SQL query, convert the NULL to 0.

**Link to tracking Issue:** <Issue number if applicable>

https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34195
**Testing:** <Describe what testing was performed and which tests were
added.>
run command "make test" in the receiver/mysqlreceiver, all the test case
passed.
**Documentation:** <Describe the documentation added.>

---------

Signed-off-by: Jian Li <jian.li2@fmr.com>

* [testbed] - Add scenarios to handle large files (#34417)

**Description:** 

Add test cases covering large files to existing testbed.
This PR adds following scenarios:

Scenario 1: Ensure that all logs are captured for files that reach a
size of 2GB.
Scenario 2: Ensure that all logs are captured for files that reach a
size of 6GB
Scenario 3: Ensure that all logs are captured for a file of
approximately 1.5GB that contains prewritten data.


**Link to tracking Issue:**
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34288

**Testing:** Added

---------

Co-authored-by: Antoine Toulme <antoine@toulme.name>

* Avoid rendering the whole event to get only the provider name (#34914)

**Description:**
The code was always getting the event as a XML string that was
unmarshalled into a type only to obtain the provider name. That can be
done in a cheaper fashion by requesting the `System` properties of the
event and reading only the provider name.

**Link to tracking Issue:**
Fixes #34755

**Testing:**
The benchmark below is only good to compare memory usage, which shows
that this change is already beneficial. See the changes for the
benchmark code.

```terminal
goos: windows
goarch: amd64
pkg: github.com/open-telemetry/opentelemetry-collector-contrib/receiver/windowseventlogreceiver
cpu: Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz
                                │ .\old.txt  │             .\pr.txt              │
                                │   sec/op   │   sec/op    vs base               │
ReadWindowsEventLogger/10-16      1.255 ± 0%   1.255 ± 0%       ~ (p=0.912 n=10)
ReadWindowsEventLogger/100-16     1.379 ± 9%   1.256 ± 0%       ~ (p=0.190 n=10)
ReadWindowsEventLogger/1_000-16   2.633 ± 5%   2.507 ± 0%       ~ (p=0.063 n=10)
geomean                           1.658        1.581       -4.62%

                                │   .\old.txt   │               .\pr.txt               │
                                │     B/op      │     B/op      vs base                │
ReadWindowsEventLogger/10-16      3.228Mi ±  6%   2.190Mi ± 8%  -32.17% (p=0.000 n=10)
ReadWindowsEventLogger/100-16     5.399Mi ± 42%   2.276Mi ± 4%  -57.85% (p=0.000 n=10)
ReadWindowsEventLogger/1_000-16   26.12Mi ±  8%   17.66Mi ± 4%  -32.38% (p=0.000 n=10)
geomean                           7.693Mi         4.448Mi       -42.18%

                                │   .\old.txt   │              .\pr.txt               │
                                │   allocs/op   │  allocs/op   vs base                │
ReadWindowsEventLogger/10-16       67.18k ±  7%   44.74k ± 9%  -33.40% (p=0.000 n=10)
ReadWindowsEventLogger/100-16     112.87k ± 42%   46.69k ± 4%  -58.64% (p=0.000 n=10)
ReadWindowsEventLogger/1_000-16    551.6k ±  8%   368.0k ± 4%  -33.28% (p=0.000 n=10)
geomean                            161.1k         91.61k       -43.14%
```

**Documentation:**
N/A

* [chore] add Tyler to CODEOWNERS for githubreceiver (#34963)

**Description:**

Adding @TylerHelmuth (GitHub Actions Receiver component sponsor) as
codeowner in the GitHub Receiver after the decision to incorporate the
tracing and log capability mentioned in #27460 into the GitHub receiver
was made.

* Update README.md (#34990)

I think this URL has changed?

* [extension/opamp] Add support for polling interval in HTTP client (#34811)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->

Adds support for configuring polling interval for the OpAMP HTTP client.

**Link to tracking Issue:** #34749

**Testing:** Adjusted unit test, manually tested

**Documentation:** Added to README

---------

Signed-off-by: Matej Gera <matejgera@gmail.com>
Co-authored-by: Evan Bradley <11745660+evan-bradley@users.noreply.github.com>

* [receiver/apache] Invalid endpoint should not cause panic (#34992)

**Description:**
The receiver crashes if it fails to parse the endpoint.

**Link to tracking Issue:**
N/A

**Testing:**
Add a test covering this case.

**Documentation:**
Changelog updated.

* [chore]: enable compares and empty rules from testifylint (#34976)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[compares](https://github.com/Antonboom/testifylint?tab=readme-ov-file#compares)
and
[empty](https://github.com/Antonboom/testifylint?tab=readme-ov-file#empty)
rules from [testifylint](https://github.com/Antonboom/testifylint)

Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>

* [receiver/githubreceiver] promote githubreceiver to alpha status (#34960)

**Description:**

Promotes the GitHub receiver to alpha status

---------

Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [connector/datadog] Improve performance in cases with many peer tags (#34945)

**Description:**
Improves performance of Datadog connector when there are many peer tags
and `connector.datadogconnector.NativeIngest` is enabled

**Link to tracking Issue:** 
Related to https://github.com/DataDog/datadog-agent/pull/28908

**Testing:** 
Added new benchmark tests, results:
```
% go test -bench . -benchmem  -benchtime=1000x
goos: darwin
goarch: arm64
pkg: github.com/open-telemetry/opentelemetry-collector-contrib/connector/datadogconnector
cpu: Apple M1 Max
BenchmarkPeerTags_Native-10    	    1000	  22851735 ns/op	    9147 B/op	     118 allocs/op
BenchmarkPeerTags_Legacy-10    	    1000	  27704684 ns/op	   12157 B/op	     152 allocs/op
PASS
```

* [chore] upgrading pulsar client v0.13.1 (#34951)

**Description:** 

Upgraded client and fix
https://github.com/open-telemetry/opentelemetry-collector-contrib/pull/34213

* [processor/interval] Update config structure for interval processor (#34926)

**Description:** This PR addresses comments made in #34805 after it was
merged

The gist is change in configuration from

```yaml
interval: 60s
gauge_pass_through: false
summary_pass_through: false
```

to 

```yaml
interval: 60s
pass_through:
  gauge: false
  summary: false
```

**Link to tracking Issue:** #34920

Signed-off-by: Arthur Silva Sens <arthursens2005@gmail.com>

* [extension/solarwindsapmsettingsextension] Added remaining implementation of solarwindsapmsettingsextension (#33315)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
- Added logic for `refresh` function

**Link to tracking Issue:** <Issue number if applicable>

[27668](https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/27668)

**Testing:** <Describe what testing was performed and which tests were
added.>
Manually tested against test server
```
extensions:
  solarwindsapmsettings:
    endpoint: "apm-testcollector.click:443"
    key: "any:any"

service:
  extensions: [solarwindsapmsettings]
```

**Documentation:** <Describe the documentation added.>
- Updated README to remove the support of
`/tmp/solarwinds-apm-settings-raw` file

---------

Co-authored-by: Antoine Toulme <antoine@toulme.name>

* feat: Support Prometheus Created Timestamps (#34596)

**Description:** exporter/prometheusexporter now supports Prometheus
Created Timestamps.

**Link to tracking Issue:** Fix #32521 

**Testing:** Unit tests were extended with the new scope

**Documentation:** No documentation was added so far, looking for
direction about where would be the best place for it :)

Signed-off-by: Arthur Silva Sens <arthursens2005@gmail.com>

* [receiver/sqlquery] support attributes for logs (#34599)

**Description:** Introduced a new configuration option,
attribute_columns, for log queries. This option was already available
for metric queries.

Note: If an attribute column is missing in the result set, the
collection process fails with an error to maintain consistency with
metric query behaviour.

Conversely, in the existing implementation, if the body column is
absent, log body will be populated with an empty string. For
consistency, it might be preferable for both behaviours to align.
However, since this could introduce a breaking change, it may be more
appropriate to implement this adjustment in a separate PR.

**Link to tracking Issue:**
[24459](https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/24459)

**Testing:** Added column `attribute` in test set, and verification in
the integration test

**Documentation:** Migrated description for `attribute_columns` from
metrics queries section to general "Queries" section, updated example
configuration

---------

Co-authored-by: Curtis Robert <crobert@splunk.com>

* [receiver/kafkareceiver]: allow tunable fetch sizes (#34431)

**Description:**
This commit adds the ability to tune the minimum, default and maximum
fetch sizes for the Kafka Receiver in the OpenTelemetry configuration
file.

The defaults are kept consistent with the defaults imposed by
[sarama](https://pkg.go.dev/github.com/shopify/sarama#Config)

**Link to tracking Issue:** 
Resolves
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/22741

**Testing:**
Built the image with `make docker-otelcontribcol`, uploaded to [Docker
Hub](https://hub.docker.com/r/ckaczynski/otelcontribcol) to pull the
image into our Kubernetes deployment, and hit the cluster with 200k logs
per second with the following settings:
```
        default_fetch_size: 15728640 # 15MB
        max_fetch_size: 31457280 # 30MB
        min_fetch_size: 1048576  # 1MB
```
These limits are absurdly high for no reason other than because I just
wanted to set them higher and see how far I could push it in our
cluster.

No new tests were added, but added to existing configuration tests in
config.go and factory.go

**Documentation:** 
Added the new configuration options to the receiver's README

---------

Co-authored-by: Israel Blancas <iblancasa@gmail.com>
Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [exporter/splunkhec] drop empty log events (#34871)

**Description:**
Drop empty log events

Log records with no body are dropped by Splunk on reception as they
contain no log message, albeit they may have attributes.
  
This PR removes those logs from consideration to be exported.
  
This is in tune with the behavior of splunkhecreceiver, which refuses
HEC events with no event (#19769)

* [exporter/signalfx] Fix goroutine leaks (#32781)

**Description:** 
This change is a refactor to allow us to enable `goleak` checks in each
of the exporter's sub-directories, as well as the signalfx receiver
(which uses the signalfxexporter in a test). The main idea is to use
`start`/`shutdown` for each package's functionality, rather than relying
on the top level context cancel of the exporter. The addition of start
and shutdowns for each package means we can more closely control the
lifecycle of each as needed, and enable `goleak` for each package.

The memory leaks being fixed are:
1. Call the `TTLMap.Shutdown` so the ticker is properly stopped:
`t.prevPts.Shutdown()`.
2. Don't block waiting for a request if the context is cancelled.

**Link to tracking issue:**
#30438

---------

Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [chore] make update-otel to 48b11ba (#34956)

Bumps core libraries to
open-telemetry/opentelemetry-collector@48b11ba1c5f83497aa09604a7d0ac7e7c3d93a5d

---------

Signed-off-by: Pablo Baeyens <pablo.baeyens@datadoghq.com>

* [chore][receiver/filelog] Change plaintext name: filelog -> file log (#34984)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
Updated the name of the file log receiver to be two words. Updated some
references as well where I thought it made sense, reviewers are welcome
to suggest changes.

**Link to tracking Issue:** <Issue number if applicable>
Resolves #34943

* [chore] Fix flaky test by ignoring metrics order (#35002)

See
https://github.com/open-telemetry/opentelemetry-collector-contrib/actions/runs/10696785646/job/29652663151?pr=34985#step:6:570

* fix: handle OTLPJSON unmarshal error (#34784)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
Handles the error that the Unmarshaler can return in case an invalid
OTLPJSON is provided, this avoids sending a nil signal to the
corresponding consumer. The fix logs the error and continues the
execution:

```go
t, err := tracesUnmarshaler.UnmarshalTraces([]byte(token.AsString()))
if err != nil {
	c.logger.Error("could extract traces from otlp json", zap.Error(err))
	continue
}
```

**Link to tracking Issue:** <Issue number if applicable>
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34782

**Testing:** <Describe what testing was performed and which tests were
added.> Factory tests moved to connector tests using the `golden` +
compare testing packages. Testdata includes a file with an invalid json
for each signal.

**Documentation:** <Describe the documentation added.> NA

* [chore] Fix flaky test in filelog receiver (#35012)

Quick fix for
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/35007.

Ideally we should not need to depend on order of files returned from the
finder but there are apparently some subtle implications which need to
be better understood before we remove the assumption.

* Bump github.com/opencontainers/runc from 1.1.13 to 1.1.14 in /cmd/otelcontribcol (#34991)

Bumps
[github.com/opencontainers/runc](https://github.com/opencontainers/runc)
from 1.1.13 to 1.1.14.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/opencontainers/runc/releases">github.com/opencontainers/runc's
releases</a>.</em></p>
<blockquote>
<h2>runc v1.1.14 -- &quot;年を取っていいことは、驚かなくなることね。&quot;</h2>
<p>This is the fourteenth patch release in the 1.1.z release branch of
runc. It includes a fix for a low severity security issue
(CVE-2024-45310) as well as some minor build-related fixes (including Go
1.23 support).</p>
<ul>
<li>Fix <a
href="https://github.com/opencontainers/runc/security/advisories/GHSA-jfvp-7x6p-h2pv">CVE-2024-45310</a>,
a low-severity attack that allowed
maliciously configured containers to create empty files and directories
on
the host.</li>
<li>Add support for Go 1.23. (<a
href="https://redirect.github.com/opencontainers/runc/issues/4360">#4360</a>,
<a
href="https://redirect.github.com/opencontainers/runc/issues/4372">#4372</a>)</li>
<li>Revert &quot;allow overriding VERSION value in Makefile&quot; and
add EXTRA_VERSION.
(<a
href="https://redirect.github.com/opencontainers/runc/issues/4370">#4370</a>,
<a
href="https://redirect.github.com/opencontainers/runc/issues/4382">#4382</a>)</li>
<li>rootfs: consolidate mountpoint creation logic. (<a
href="https://redirect.github.com/opencontainers/runc/issues/4359">#4359</a>)</li>
</ul>
<h3>Static Linking Notices</h3>
<p>The <code>runc</code> binary distributed with this release are
<em>statically linked</em> with
the following <a
href="https://www.gnu.org/licenses/old-licenses/lgpl-2.1.en.html">GNU
LGPL-2.1</a> licensed libraries, with <code>runc</code> acting
as a &quot;work that uses the Library&quot;:</p>
<ul>
<li><a href="https://github.com/seccomp/libseccomp">libseccomp</a></li>
</ul>
<p>The versions of these libraries were not modified from their upstream
versions,
but in order to comply with the LGPL-2.1 (§6(a)), we have attached the
complete source code for those libraries which (when combined with the
attached
runc source code) may be used to exercise your rights under the
LGPL-2.1.</p>
<p>However we strongly suggest that you make use of your distribution's
packages
or download them from the authoritative upstream sources, especially
since
these libraries are related to the security of your containers.</p>
<!-- raw HTML omitted -->
<p>Thanks to all of the contributors who made this release possible:</p>
<ul>
<li>Akihiro Suda <a
href="mailto:akihiro.suda.cz@hco.ntt.co.jp">akihiro.s…
narcis96 added a commit to Huawei-IRC-Cloud-Telemetry-Engineering/opentelemetry-collector-contrib that referenced this pull request Sep 10, 2024
@narcis96 @mmorel-35
@TylerHelmuth @crobert-1 @bacherfl @mx-psi @adrielp @andrzej-stencel @codeboten @atoulme @MovieStoreGuy @CharlieTLe @Frapschen @lhns @renovate @opentelemetrybot @cyrille-leclerc @sandeepsukhani @iblancasa @rpax @jpkrohling @BominRahmani @songy23 @BinaryFissionGames @knarfli @VihasMakwana @pjanotti @gjtorikian @matej-g @evan-bradley @ArthurSens @jerrytfleung @Grandys @cxdy @djaglowski @rogercoll @dependabot @dashpole @carsonip @sh0rez @wildum @dpaasman00 @kaisecheng @mwear @jmacd @JaredTan95 @abhishek-at-cloudwerx @SamerJ @edmocosta @odubajDT @thmshmm @alexgreenbank @carrieedwards @fedetorres93 @krajorama @liustanley @mackjmr
Merge remote-tracking branch 'upstream/main' (#46)
12de166 
* [chore]: enable bool-compare rule from testifylint (#34912)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[bool-compare](https://github.com/Antonboom/testifylint?tab=readme-ov-file#bool-compare)
rule from [testifylint](https://github.com/Antonboom/testifylint)

It's linter provided by golangci-lint.

Here all available rules are activated except those who require to be
fixed. This PR only fixes bool-compare so the quantity of changes stays
reasonnable for reviewers.

Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>

* [pkg/ottl] Remove tracing from OTTL (#34910)

**Description:** 
Reverts
https://github.com/open-telemetry/opentelemetry-collector-contrib/pull/33508
since it was causing performance issues

**Link to tracking Issue:** <Issue number if applicable>
Reopens
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/33433
Related to
https://github.com/open-telemetry/opentelemetry-collector/issues/10858
Closes
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34890

* [chore]: enable len rule from testifylint (#34921)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[len](https://github.com/Antonboom/testifylint?tab=readme-ov-file#len)
rule from [testifylint](https://github.com/Antonboom/testifylint)

* [chore][receiver/nginx] Update README for consistency (#34923)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
This just cleans up the README a bit:
1. Make case of `NGINX` consistent. Happy to change it to `nginx` if
that's preferred.
2. Remove empty `Details` section
3. Cleanup description of the `collection_interval` config option. This
is the same config option many other receivers have, so I don't think
the concept needs explained in-depth here.
4. Remove disclaimer that the component's status is beta and
configuration is subject to change. The README's header states this
component is beta, so I don't think it needs to be repeated.

* [processor/redaction] add support for redacting metrics and logs attributes (#34609)

**Description:** This PR extends the redaction processor to also support
the redaction of attributes within logs and metrics.

**Link to tracking Issue:** #34479 

**Testing:** Extended the existing unit tests to also cover the
redaction of logs and metrics

**Documentation:** Adapted the readme to reflect the changes

---------

Signed-off-by: Florian Bacher <florian.bacher@dynatrace.com>

* [chore] Fix linter issues (#34937)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->

#34609 and #34921 conflicted. This fixes CI

* [receiver/gitproviderreceiver] rename to githubreceiver (#34731)

**Description:** <Describe what has changed.>
Renames `gitproviderreceiver` to `githubreceiver` to better align with
OpenTelemetry Semantic Conventions v1.27.0+ and allow for tracing and
log signals in the future.

---------

Co-authored-by: Andrzej Stencel <andrzej.stencel@elastic.co>
Co-authored-by: Pablo Baeyens <pbaeyens31+github@gmail.com>

* [chore][CODEOWNERS] Change account references to match new username (#34929)

[Failing CI/CD
action](https://github.com/open-telemetry/opentelemetry-collector-contrib/actions/runs/10616610306/job/29427492169#step:16:13)

Failure output:

```
cd cmd/githubgen && go install .
githubgen
2024/08/2[9](https://github.com/open-telemetry/opentelemetry-collector-contrib/actions/runs/10616610306/job/29427492169#step:16:10) 14:07:14 codeowners are not members: kkujawa-sumo
make: *** [Makefile:296: gengithub] Error 1
```

It appears that the user @kkujawa-sumo has been renamed to
@kasia-kujawa. This updates all references to resolve our code owners
check to ensure all code owners are members of the OpenTelemetry
organization.

* [chore] refactor filter processor test to use generated test harness (#34940)

The code in telemetry_test.go was mostly doing something the code
generated by mdatagen was doing. Updated the tests to use that instead.

Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>

* [chore] use generated test harness for groupbyattrs processor (#34941)

Like
https://github.com/open-telemetry/opentelemetry-collector-contrib/pull/34940
but for the groupsbyattrs processor.

Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>

* [chore] update core to pull in telemetry settings changes (#34930)

Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>

* [receiver/splunkhec] fix memory leak (#34911)

**Description:** 
Fix memory leak when the receiver is used for both metrics and logs at
the same time

**Link to tracking Issue:** <Issue number if applicable>
Fixes #34886

* [chore] Updating @MovieStoreGuy affiliation (#34947)

* [chore]: Update README.md (#34725)

Alolita Sharma works at Apple now. :)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->

**Link to tracking Issue:** <Issue number if applicable>

**Testing:** <Describe what testing was performed and which tests were
added.>

**Documentation:** <Describe the documentation added.>

* [connector/servicegraph]Fix incorrectly reversed latency settings(resolve #34562 unit fail) (#34933)

**Description:** <Describe what has changed.>
This PR resolves the #34562 unit failure and adds back this bugfix after
revert #34865.

* [chore]: enable error-nil and nil-compare rules from testifylint (#34936)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[error-nil](https://github.com/Antonboom/testifylint?tab=readme-ov-file#error-nil)
and
[nil-compare](https://github.com/Antonboom/testifylint?tab=readme-ov-file#nil-compare)
rules from [testifylint](https://github.com/Antonboom/testifylint)


It also adds testifylint as tool to use with a make command

* [connector/count] fix typo in metric.datapoint.count (#34961)

**Documentation:** The documentation mentions a metric called
"metric.data_point.count" but the metric is actually called
"metric.datapoint.count"

Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [chore] Upgrade arvo package (#34962)

**Description:** 

Upgrading the arvo package used, it appears to be causing build issues
on integer overflows

* Update module github.com/shirou/gopsutil/v4 to v4.24.8 (#34970)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/shirou/gopsutil/v4](https://redirect.github.com/shirou/gopsutil)
| `v4.24.7` -> `v4.24.8` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.7/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fshirou%2fgopsutil%2fv4/v4.24.7/v4.24.8?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>shirou/gopsutil (github.com/shirou/gopsutil/v4)</summary>

###
[`v4.24.8`](https://redirect.github.com/shirou/gopsutil/releases/tag/v4.24.8)

[Compare
Source](https://redirect.github.com/shirou/gopsutil/compare/v4.24.7...v4.24.8)

<!-- Release notes generated using configuration in .github/release.yml
at v4.24.8 -->

#### What's Changed

##### disk

- fix(IOCountersWithContext): Fix the issue of not using names to fil
ter devices in func IOCountersWithContext of the windows implementation
by [@&#8203;zmyzheng](https://redirect.github.com/zmyzheng) in
[https://github.com/shirou/gopsutil/pull/1688](https://redirect.github.com/shirou/gopsutil/pull/1688)
- \[disk]\[windows]: ignore network drive when not ready by
[@&#8203;shirou](https://redirect.github.com/shirou) in
[https://github.com/shirou/gopsutil/pull/1699](https://redirect.github.com/shirou/gopsutil/pull/1699)

##### process

- Fix parsing of /proc/pid/smaps when path is empty by
[@&#8203;pgimalac](https://redirect.github.com/pgimalac) in
[https://github.com/shirou/gopsutil/pull/1691](https://redirect.github.com/shirou/gopsutil/pull/1691)
- Refactoring the algorithm for calculating CPU usage by
[@&#8203;TheBestLL](https://redirect.github.com/TheBestLL) in
[https://github.com/shirou/gopsutil/pull/1692](https://redirect.github.com/shirou/gopsutil/pull/1692)
- Fix panic on OpenBSD and FreeBSD systems if KinfoProc size has an
unexpected size by
[@&#8203;fivitti](https://redirect.github.com/fivitti) in
[https://github.com/shirou/gopsutil/pull/1694](https://redirect.github.com/shirou/gopsutil/pull/1694)

##### Other Changes

- Fix badge link in README.md by
[@&#8203;Yurunsoft](https://redirect.github.com/Yurunsoft) in
[https://github.com/shirou/gopsutil/pull/1695](https://redirect.github.com/shirou/gopsutil/pull/1695)
- fix golangcilint errors, ignore gosec G115 by
[@&#8203;shirou](https://redirect.github.com/shirou) in
[https://github.com/shirou/gopsutil/pull/1697](https://redirect.github.com/shirou/gopsutil/pull/1697)
- fix: golangci lint with max -> maxConn by
[@&#8203;shirou](https://redirect.github.com/shirou) in
[https://github.com/shirou/gopsutil/pull/1693](https://redirect.github.com/shirou/gopsutil/pull/1693)

#### New Contributors 🎉

- [@&#8203;zmyzheng](https://redirect.github.com/zmyzheng) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1688](https://redirect.github.com/shirou/gopsutil/pull/1688)
- [@&#8203;Yurunsoft](https://redirect.github.com/Yurunsoft) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1695](https://redirect.github.com/shirou/gopsutil/pull/1695)
- [@&#8203;pgimalac](https://redirect.github.com/pgimalac) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1691](https://redirect.github.com/shirou/gopsutil/pull/1691)
- [@&#8203;TheBestLL](https://redirect.github.com/TheBestLL) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1692](https://redirect.github.com/shirou/gopsutil/pull/1692)
- [@&#8203;fivitti](https://redirect.github.com/fivitti) made their
first contribution in
[https://github.com/shirou/gopsutil/pull/1694](https://redirect.github.com/shirou/gopsutil/pull/1694)

**Full Changelog**:
https://github.com/shirou/gopsutil/compare/v4.24.7...v4.24.8

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* Update module github.com/ClickHouse/clickhouse-go/v2 to v2.28.2 (#34968)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/ClickHouse/clickhouse-go/v2](https://redirect.github.com/ClickHouse/clickhouse-go)
| `v2.28.1` -> `v2.28.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.1/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fClickHouse%2fclickhouse-go%2fv2/v2.28.1/v2.28.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>ClickHouse/clickhouse-go
(github.com/ClickHouse/clickhouse-go/v2)</summary>

###
[`v2.28.2`](https://redirect.github.com/ClickHouse/clickhouse-go/blob/HEAD/CHANGELOG.md#v2282-2024-08-30----Release-notes-generated-using-configuration-in-githubreleaseyml-at-main---)

[Compare
Source](https://redirect.github.com/ClickHouse/clickhouse-go/compare/v2.28.1...v2.28.2)

#### What's Changed

##### Fixes 🐛

- Validate connection in bad state before query execution in the stdlib
database/sql driver by
[@&#8203;jkaflik](https://redirect.github.com/jkaflik) in
[https://github.com/ClickHouse/clickhouse-go/pull/1396](https://redirect.github.com/ClickHouse/clickhouse-go/pull/1396)

##### Other Changes 🛠

- Update README with newer Go versions by
[@&#8203;jkaflik](https://redirect.github.com/jkaflik) in
[https://github.com/ClickHouse/clickhouse-go/pull/1393](https://redirect.github.com/ClickHouse/clickhouse-go/pull/1393)

**Full Changelog**:
https://github.com/ClickHouse/clickhouse-go/compare/v2.28.1...v2.28.2

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* Update All github.com/datadog packages to v0.56.2 (#34965)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/DataDog/datadog-agent/comp/core/config](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/core/hostname/hostnameinterface](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2fhostname%2fhostnameinterface/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/core/log](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fcore%2flog/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/logs/agent/config](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2flogs%2fagent%2fconfig/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/logsagentpipeline](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/logsagentpipeline/logsagentpipelineimpl](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2flogsagentpipeline%2flogsagentpipelineimpl/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/otlp/components/exporter/logsagentexporter](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fexporter%2flogsagentexporter/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/otlp/components/metricsclient](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fmetricsclient/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/otelcol/otlp/components/statsprocessor](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2fotelcol%2fotlp%2fcomponents%2fstatsprocessor/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/comp/trace/compression/impl-gzip](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fcomp%2ftrace%2fcompression%2fimpl-gzip/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/config/model](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fmodel/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/config/setup](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fconfig%2fsetup/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/logs/sources](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2flogs%2fsources/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/obfuscate](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fobfuscate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/proto](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2fproto/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/trace](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2ftrace/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
|
[github.com/DataDog/datadog-agent/pkg/util/hostname/validate](https://redirect.github.com/DataDog/datadog-agent)
| `v0.56.0` -> `v0.56.2` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fDataDog%2fdatadog-agent%2fpkg%2futil%2fhostname%2fvalidate/v0.56.0/v0.56.2?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about these
updates again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* Update module github.com/snowflakedb/gosnowflake to v1.11.1 (#34971)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
|
[github.com/snowflakedb/gosnowflake](https://redirect.github.com/snowflakedb/gosnowflake)
| `v1.11.0` -> `v1.11.1` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.0/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fsnowflakedb%2fgosnowflake/v1.11.0/v1.11.1?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>snowflakedb/gosnowflake
(github.com/snowflakedb/gosnowflake)</summary>

###
[`v1.11.1`](https://redirect.github.com/snowflakedb/gosnowflake/releases/tag/v1.11.1):
Release

[Compare
Source](https://redirect.github.com/snowflakedb/gosnowflake/compare/v1.11.0...v1.11.1)

- Please check Snowflake [community page for release
notes](https://docs.snowflake.com/en/release-notes/clients-drivers/golang).

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* [exporter/loki] Document the migration from the Loki Exporter to the Loki V3 OTLP endpoint (#34918)

**Description:** <Describe what has changed.>

Document how to migrate from the now deprecated OTel Collector Loki
Exporter to the new Loki V3 OTLP endpoint and new OTel log format

---------

Co-authored-by: Curtis Robert <crobert@splunk.com>
Co-authored-by: Sandeep Sukhani <sandeep.d.sukhani@gmail.com>

* [connector/spanmetrics] Improve consistency between metrics generated by spanmetricsconnector (#34485)

**Link to tracking Issue:** #33227 #32818

**Documentation:** added an entry to the changelog explaining the
deprecated metrics.

---------

Signed-off-by: Israel Blancas <iblancasa@gmail.com>
Signed-off-by: Juraci Paixão Kröhling <juraci@kroehling.de>
Co-authored-by: Murphy Chen <minquan.chen@daocloud.io>
Co-authored-by: Rafael Pax <rpax@users.noreply.github.com>
Co-authored-by: Juraci Paixão Kröhling <juraci@kroehling.de>

* Update module google.golang.org/grpc to v1.66.0 (#34978)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
| [google.golang.org/grpc](https://redirect.github.com/grpc/grpc-go) |
`v1.65.0` -> `v1.66.0` |
[![age](https://developer.mend.io/api/mc/badges/age/go/google.golang.org%2fgrpc/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/google.golang.org%2fgrpc/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/google.golang.org%2fgrpc/v1.65.0/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/google.golang.org%2fgrpc/v1.65.0/v1.66.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>grpc/grpc-go (google.golang.org/grpc)</summary>

###
[`v1.66.0`](https://redirect.github.com/grpc/grpc-go/releases/tag/v1.66.0):
Release 1.66.0

[Compare
Source](https://redirect.github.com/grpc/grpc-go/compare/v1.65.0...v1.66.0)

### New Features

- metadata: stabilize `ValueFromIncomingContext`
([#&#8203;7368](https://redirect.github.com/grpc/grpc-go/issues/7368))
- Special Thanks:
[@&#8203;KarthikReddyPuli](https://redirect.github.com/KarthikReddyPuli)
- client: stabilize the `WaitForStateChange` and `GetState` methods,
which were previously experimental.
([#&#8203;7425](https://redirect.github.com/grpc/grpc-go/issues/7425))
- xds: Implement ADS flow control mechanism
([#&#8203;7458](https://redirect.github.com/grpc/grpc-go/issues/7458))
- See
[https://github.com/grpc/grpc/issues/34099](https://redirect.github.com/grpc/grpc/issues/34099)
for context.
- balancer/rls: Add metrics for data cache and picker internals
([#&#8203;7484](https://redirect.github.com/grpc/grpc-go/issues/7484),
[#&#8203;7495](https://redirect.github.com/grpc/grpc-go/issues/7495))
- xds: LRS load reports now include the `total_issued_requests` field.
([#&#8203;7544](https://redirect.github.com/grpc/grpc-go/issues/7544))

### Bug Fixes

- grpc: Clients now return status code INTERNAL instead of UNIMPLEMENTED
when the server uses an unsupported compressor. This is consistent with
the [gRPC compression
spec](https://redirect.github.com/grpc/grpc/blob/master/doc/compression.md#compression-method-asymmetry-between-peers).
([#&#8203;7461](https://redirect.github.com/grpc/grpc-go/issues/7461))
- Special Thanks:
[@&#8203;Gayathri625](https://redirect.github.com/Gayathri625)
- transport: Fix a bug which could result in writes busy looping when
the underlying `conn.Write` returns errors
([#&#8203;7394](https://redirect.github.com/grpc/grpc-go/issues/7394))
- Special Thanks: [@&#8203;veshij](https://redirect.github.com/veshij)
- client: fix race that could lead to orphaned connections and
associated resources.
([#&#8203;7390](https://redirect.github.com/grpc/grpc-go/issues/7390))
- xds: use locality from the connected address for load reporting with
pick_first
([#&#8203;7378](https://redirect.github.com/grpc/grpc-go/issues/7378))
- without this fix, if a priority contains multiple localities with
pick_first, load was reported for the wrong locality
- client: prevent hanging during ClientConn.Close() when the network is
unreachable
([#&#8203;7540](https://redirect.github.com/grpc/grpc-go/issues/7540))

### Performance Improvements

- transport: double buffering is avoided when using an http connect
proxy and the target server waits for client to send the first message.
([#&#8203;7424](https://redirect.github.com/grpc/grpc-go/issues/7424))
- codec: Implement a new `Codec` which uses buffer recycling for encoded
message
([#&#8203;7356](https://redirect.github.com/grpc/grpc-go/issues/7356))
- introduce a `mem` package to facilitate buffer reuse
([#&#8203;7432](https://redirect.github.com/grpc/grpc-go/issues/7432))
- Special Thanks:
[@&#8203;PapaCharlie](https://redirect.github.com/PapaCharlie)

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>

* [vcenterreceiver] Updated units on several metrics (#34946)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
The following change works to update several metrics units to be more
inline with the semantics declared here:
https://opentelemetry.io/docs/specs/semconv/general/metrics/#instrument-units
Specifically it changes all the uses of `sec` to `s` and also updates
the incorrect unit usage of `{MHz}` to `MHz` on a couple metrics.

**Link to tracking Issue:** <Issue number if applicable>

**Testing:** <Describe what testing was performed and which tests were
added.>
All golden package tests were updated, as well as integration tests.

**Documentation:** <Describe the documentation added.>
Documentation was updated with mdatagen with the use of `make generate`

* Update module github.com/SAP/go-hdb to v1.12.0 (#34973)

This PR contains the following updates:

| Package | Change | Age | Adoption | Passing | Confidence |
|---|---|---|---|---|---|
| [github.com/SAP/go-hdb](https://redirect.github.com/SAP/go-hdb) |
`v1.11.3` -> `v1.12.0` |
[![age](https://developer.mend.io/api/mc/badges/age/go/github.com%2fSAP%2fgo-hdb/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![adoption](https://developer.mend.io/api/mc/badges/adoption/go/github.com%2fSAP%2fgo-hdb/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![passing](https://developer.mend.io/api/mc/badges/compatibility/go/github.com%2fSAP%2fgo-hdb/v1.11.3/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|
[![confidence](https://developer.mend.io/api/mc/badges/confidence/go/github.com%2fSAP%2fgo-hdb/v1.11.3/v1.12.0?slim=true)](https://docs.renovatebot.com/merge-confidence/)
|

---

> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.

---

### Release Notes

<details>
<summary>SAP/go-hdb (github.com/SAP/go-hdb)</summary>

###
[`v1.12.0`](https://redirect.github.com/SAP/go-hdb/blob/HEAD/RELEASENOTES.md#v1120)

[Compare
Source](https://redirect.github.com/SAP/go-hdb/compare/v1.11.3...v1.12.0)

##### Changes

- Changed 'prometheus' into own go module to reduce dependencies on
go-hdb.

</details>

---

### Configuration

📅 **Schedule**: Branch creation - "on tuesday" (UTC), Automerge - At any
time (no schedule defined).

🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.

♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.

🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.

---

- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box

---

This PR was generated by [Mend Renovate](https://mend.io/renovate/).
View the [repository job
log](https://developer.mend.io/github/open-telemetry/opentelemetry-collector-contrib).

<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOlsiZGVwZW5kZW5jaWVzIiwicmVub3ZhdGVib3QiXX0=-->

---------

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: opentelemetrybot <107717825+opentelemetrybot@users.noreply.github.com>
Co-authored-by: Yang Song <songy23@users.noreply.github.com>

* [chore][pkg/stanza] Speed up file deduplication in finder (#34888)

**Description:** <Describe what has changed.>
For large numbers of files, the logic that deduplicates the filenames
between matches is costly. This is mainly due to the O(n^2) deduping
algorithm used. If we instead use a map (as a hashset), we can make this
~O(n).

This PR speeds up the deduplication logic, as well as adds a benchmark
for a case where the filelog receiver is polling many files at once.

**Testing:** <Describe what testing was performed and which tests were
added.>

Running the added benchmark and comparing with benchstat, we can see a
large increase in speed for the large number of files case (10000
monitored files), at the cost of a very slight increase in memory usage:
```
goos: darwin
goarch: arm64
pkg: github.com/open-telemetry/opentelemetry-collector-contrib/pkg/stanza/fileconsumer/matcher/internal/finder
cpu: Apple M3 Pro
                │    old.txt    │               new.txt               │
                │    sec/op     │    sec/op     vs base               │
Find10kFiles-12   198.636m ± 6%   8.696m ± 16%  -95.62% (p=0.002 n=6)

                │   old.txt    │              new.txt               │
                │     B/op     │     B/op      vs base              │
Find10kFiles-12   5.416Mi ± 0%   5.581Mi ± 0%  +3.04% (p=0.002 n=6)

                │   old.txt   │              new.txt              │
                │  allocs/op  │  allocs/op   vs base              │
Find10kFiles-12   80.06k ± 0%   80.25k ± 0%  +0.23% (p=0.002 n=6)
```

* [receiver/mysql] client, convert NULL to int64 (#34411)

**Description:** <Describe what has changed.>
bug fix, receiver/mysql client.go raise error when the TABLE_ROWS column
is NULL,
fix it in the SQL query, convert the NULL to 0.

**Link to tracking Issue:** <Issue number if applicable>

https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34195
**Testing:** <Describe what testing was performed and which tests were
added.>
run command "make test" in the receiver/mysqlreceiver, all the test case
passed.
**Documentation:** <Describe the documentation added.>

---------

Signed-off-by: Jian Li <jian.li2@fmr.com>

* [testbed] - Add scenarios to handle large files (#34417)

**Description:** 

Add test cases covering large files to existing testbed.
This PR adds following scenarios:

Scenario 1: Ensure that all logs are captured for files that reach a
size of 2GB.
Scenario 2: Ensure that all logs are captured for files that reach a
size of 6GB
Scenario 3: Ensure that all logs are captured for a file of
approximately 1.5GB that contains prewritten data.


**Link to tracking Issue:**
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34288

**Testing:** Added

---------

Co-authored-by: Antoine Toulme <antoine@toulme.name>

* Avoid rendering the whole event to get only the provider name (#34914)

**Description:**
The code was always getting the event as a XML string that was
unmarshalled into a type only to obtain the provider name. That can be
done in a cheaper fashion by requesting the `System` properties of the
event and reading only the provider name.

**Link to tracking Issue:**
Fixes #34755

**Testing:**
The benchmark below is only good to compare memory usage, which shows
that this change is already beneficial. See the changes for the
benchmark code.

```terminal
goos: windows
goarch: amd64
pkg: github.com/open-telemetry/opentelemetry-collector-contrib/receiver/windowseventlogreceiver
cpu: Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz
                                │ .\old.txt  │             .\pr.txt              │
                                │   sec/op   │   sec/op    vs base               │
ReadWindowsEventLogger/10-16      1.255 ± 0%   1.255 ± 0%       ~ (p=0.912 n=10)
ReadWindowsEventLogger/100-16     1.379 ± 9%   1.256 ± 0%       ~ (p=0.190 n=10)
ReadWindowsEventLogger/1_000-16   2.633 ± 5%   2.507 ± 0%       ~ (p=0.063 n=10)
geomean                           1.658        1.581       -4.62%

                                │   .\old.txt   │               .\pr.txt               │
                                │     B/op      │     B/op      vs base                │
ReadWindowsEventLogger/10-16      3.228Mi ±  6%   2.190Mi ± 8%  -32.17% (p=0.000 n=10)
ReadWindowsEventLogger/100-16     5.399Mi ± 42%   2.276Mi ± 4%  -57.85% (p=0.000 n=10)
ReadWindowsEventLogger/1_000-16   26.12Mi ±  8%   17.66Mi ± 4%  -32.38% (p=0.000 n=10)
geomean                           7.693Mi         4.448Mi       -42.18%

                                │   .\old.txt   │              .\pr.txt               │
                                │   allocs/op   │  allocs/op   vs base                │
ReadWindowsEventLogger/10-16       67.18k ±  7%   44.74k ± 9%  -33.40% (p=0.000 n=10)
ReadWindowsEventLogger/100-16     112.87k ± 42%   46.69k ± 4%  -58.64% (p=0.000 n=10)
ReadWindowsEventLogger/1_000-16    551.6k ±  8%   368.0k ± 4%  -33.28% (p=0.000 n=10)
geomean                            161.1k         91.61k       -43.14%
```

**Documentation:**
N/A

* [chore] add Tyler to CODEOWNERS for githubreceiver (#34963)

**Description:**

Adding @TylerHelmuth (GitHub Actions Receiver component sponsor) as
codeowner in the GitHub Receiver after the decision to incorporate the
tracing and log capability mentioned in #27460 into the GitHub receiver
was made.

* Update README.md (#34990)

I think this URL has changed?

* [extension/opamp] Add support for polling interval in HTTP client (#34811)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->

Adds support for configuring polling interval for the OpAMP HTTP client.

**Link to tracking Issue:** #34749

**Testing:** Adjusted unit test, manually tested

**Documentation:** Added to README

---------

Signed-off-by: Matej Gera <matejgera@gmail.com>
Co-authored-by: Evan Bradley <11745660+evan-bradley@users.noreply.github.com>

* [receiver/apache] Invalid endpoint should not cause panic (#34992)

**Description:**
The receiver crashes if it fails to parse the endpoint.

**Link to tracking Issue:**
N/A

**Testing:**
Add a test covering this case.

**Documentation:**
Changelog updated.

* [chore]: enable compares and empty rules from testifylint (#34976)

#### Description

Testifylint is a linter that provides best practices with the use of
testify.

This PR enables
[compares](https://github.com/Antonboom/testifylint?tab=readme-ov-file#compares)
and
[empty](https://github.com/Antonboom/testifylint?tab=readme-ov-file#empty)
rules from [testifylint](https://github.com/Antonboom/testifylint)

Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com>

* [receiver/githubreceiver] promote githubreceiver to alpha status (#34960)

**Description:**

Promotes the GitHub receiver to alpha status

---------

Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [connector/datadog] Improve performance in cases with many peer tags (#34945)

**Description:**
Improves performance of Datadog connector when there are many peer tags
and `connector.datadogconnector.NativeIngest` is enabled

**Link to tracking Issue:** 
Related to https://github.com/DataDog/datadog-agent/pull/28908

**Testing:** 
Added new benchmark tests, results:
```
% go test -bench . -benchmem  -benchtime=1000x
goos: darwin
goarch: arm64
pkg: github.com/open-telemetry/opentelemetry-collector-contrib/connector/datadogconnector
cpu: Apple M1 Max
BenchmarkPeerTags_Native-10    	    1000	  22851735 ns/op	    9147 B/op	     118 allocs/op
BenchmarkPeerTags_Legacy-10    	    1000	  27704684 ns/op	   12157 B/op	     152 allocs/op
PASS
```

* [chore] upgrading pulsar client v0.13.1 (#34951)

**Description:** 

Upgraded client and fix
https://github.com/open-telemetry/opentelemetry-collector-contrib/pull/34213

* [processor/interval] Update config structure for interval processor (#34926)

**Description:** This PR addresses comments made in #34805 after it was
merged

The gist is change in configuration from

```yaml
interval: 60s
gauge_pass_through: false
summary_pass_through: false
```

to 

```yaml
interval: 60s
pass_through:
  gauge: false
  summary: false
```

**Link to tracking Issue:** #34920

Signed-off-by: Arthur Silva Sens <arthursens2005@gmail.com>

* [extension/solarwindsapmsettingsextension] Added remaining implementation of solarwindsapmsettingsextension (#33315)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
- Added logic for `refresh` function

**Link to tracking Issue:** <Issue number if applicable>

[27668](https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/27668)

**Testing:** <Describe what testing was performed and which tests were
added.>
Manually tested against test server
```
extensions:
  solarwindsapmsettings:
    endpoint: "apm-testcollector.click:443"
    key: "any:any"

service:
  extensions: [solarwindsapmsettings]
```

**Documentation:** <Describe the documentation added.>
- Updated README to remove the support of
`/tmp/solarwinds-apm-settings-raw` file

---------

Co-authored-by: Antoine Toulme <antoine@toulme.name>

* feat: Support Prometheus Created Timestamps (#34596)

**Description:** exporter/prometheusexporter now supports Prometheus
Created Timestamps.

**Link to tracking Issue:** Fix #32521 

**Testing:** Unit tests were extended with the new scope

**Documentation:** No documentation was added so far, looking for
direction about where would be the best place for it :)

Signed-off-by: Arthur Silva Sens <arthursens2005@gmail.com>

* [receiver/sqlquery] support attributes for logs (#34599)

**Description:** Introduced a new configuration option,
attribute_columns, for log queries. This option was already available
for metric queries.

Note: If an attribute column is missing in the result set, the
collection process fails with an error to maintain consistency with
metric query behaviour.

Conversely, in the existing implementation, if the body column is
absent, log body will be populated with an empty string. For
consistency, it might be preferable for both behaviours to align.
However, since this could introduce a breaking change, it may be more
appropriate to implement this adjustment in a separate PR.

**Link to tracking Issue:**
[24459](https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/24459)

**Testing:** Added column `attribute` in test set, and verification in
the integration test

**Documentation:** Migrated description for `attribute_columns` from
metrics queries section to general "Queries" section, updated example
configuration

---------

Co-authored-by: Curtis Robert <crobert@splunk.com>

* [receiver/kafkareceiver]: allow tunable fetch sizes (#34431)

**Description:**
This commit adds the ability to tune the minimum, default and maximum
fetch sizes for the Kafka Receiver in the OpenTelemetry configuration
file.

The defaults are kept consistent with the defaults imposed by
[sarama](https://pkg.go.dev/github.com/shopify/sarama#Config)

**Link to tracking Issue:** 
Resolves
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/22741

**Testing:**
Built the image with `make docker-otelcontribcol`, uploaded to [Docker
Hub](https://hub.docker.com/r/ckaczynski/otelcontribcol) to pull the
image into our Kubernetes deployment, and hit the cluster with 200k logs
per second with the following settings:
```
        default_fetch_size: 15728640 # 15MB
        max_fetch_size: 31457280 # 30MB
        min_fetch_size: 1048576  # 1MB
```
These limits are absurdly high for no reason other than because I just
wanted to set them higher and see how far I could push it in our
cluster.

No new tests were added, but added to existing configuration tests in
config.go and factory.go

**Documentation:** 
Added the new configuration options to the receiver's README

---------

Co-authored-by: Israel Blancas <iblancasa@gmail.com>
Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [exporter/splunkhec] drop empty log events (#34871)

**Description:**
Drop empty log events

Log records with no body are dropped by Splunk on reception as they
contain no log message, albeit they may have attributes.
  
This PR removes those logs from consideration to be exported.
  
This is in tune with the behavior of splunkhecreceiver, which refuses
HEC events with no event (#19769)

* [exporter/signalfx] Fix goroutine leaks (#32781)

**Description:** 
This change is a refactor to allow us to enable `goleak` checks in each
of the exporter's sub-directories, as well as the signalfx receiver
(which uses the signalfxexporter in a test). The main idea is to use
`start`/`shutdown` for each package's functionality, rather than relying
on the top level context cancel of the exporter. The addition of start
and shutdowns for each package means we can more closely control the
lifecycle of each as needed, and enable `goleak` for each package.

The memory leaks being fixed are:
1. Call the `TTLMap.Shutdown` so the ticker is properly stopped:
`t.prevPts.Shutdown()`.
2. Don't block waiting for a request if the context is cancelled.

**Link to tracking issue:**
#30438

---------

Co-authored-by: Sean Marciniak <30928402+MovieStoreGuy@users.noreply.github.com>

* [chore] make update-otel to 48b11ba (#34956)

Bumps core libraries to
open-telemetry/opentelemetry-collector@48b11ba1c5f83497aa09604a7d0ac7e7c3d93a5d

---------

Signed-off-by: Pablo Baeyens <pablo.baeyens@datadoghq.com>

* [chore][receiver/filelog] Change plaintext name: filelog -> file log (#34984)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
Updated the name of the file log receiver to be two words. Updated some
references as well where I thought it made sense, reviewers are welcome
to suggest changes.

**Link to tracking Issue:** <Issue number if applicable>
Resolves #34943

* [chore] Fix flaky test by ignoring metrics order (#35002)

See
https://github.com/open-telemetry/opentelemetry-collector-contrib/actions/runs/10696785646/job/29652663151?pr=34985#step:6:570

* fix: handle OTLPJSON unmarshal error (#34784)

**Description:** <Describe what has changed.>
<!--Ex. Fixing a bug - Describe the bug and how this fixes the issue.
Ex. Adding a feature - Explain what this achieves.-->
Handles the error that the Unmarshaler can return in case an invalid
OTLPJSON is provided, this avoids sending a nil signal to the
corresponding consumer. The fix logs the error and continues the
execution:

```go
t, err := tracesUnmarshaler.UnmarshalTraces([]byte(token.AsString()))
if err != nil {
	c.logger.Error("could extract traces from otlp json", zap.Error(err))
	continue
}
```

**Link to tracking Issue:** <Issue number if applicable>
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/34782

**Testing:** <Describe what testing was performed and which tests were
added.> Factory tests moved to connector tests using the `golden` +
compare testing packages. Testdata includes a file with an invalid json
for each signal.

**Documentation:** <Describe the documentation added.> NA

* [chore] Fix flaky test in filelog receiver (#35012)

Quick fix for
https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/35007.

Ideally we should not need to depend on order of files returned from the
finder but there are apparently some subtle implications which need to
be better understood before we remove the assumption.

* Bump github.com/opencontainers/runc from 1.1.13 to 1.1.14 in /cmd/otelcontribcol (#34991)

Bumps
[github.com/opencontainers/runc](https://github.com/opencontainers/runc)
from 1.1.13 to 1.1.14.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/opencontainers/runc/releases">github.com/opencontainers/runc's
releases</a>.</em></p>
<blockquote>
<h2>runc v1.1.14 -- &quot;年を取っていいことは、驚かなくなることね。&quot;</h2>
<p>This is the fourteenth patch release in the 1.1.z release branch of
runc. It includes a fix for a low severity security issue
(CVE-2024-45310) as well as some minor build-related fixes (including Go
1.23 support).</p>
<ul>
<li>Fix <a
href="https://github.com/opencontainers/runc/security/advisories/GHSA-jfvp-7x6p-h2pv">CVE-2024-45310</a>,
a low-severity attack that allowed
maliciously configured containers to create empty files and directories
on
the host.</li>
<li>Add support for Go 1.23. (<a
href="https://redirect.github.com/opencontainers/runc/issues/4360">#4360</a>,
<a
href="https://redirect.github.com/opencontainers/runc/issues/4372">#4372</a>)</li>
<li>Revert &quot;allow overriding VERSION value in Makefile&quot; and
add EXTRA_VERSION.
(<a
href="https://redirect.github.com/opencontainers/runc/issues/4370">#4370</a>,
<a
href="https://redirect.github.com/opencontainers/runc/issues/4382">#4382</a>)</li>
<li>rootfs: consolidate mountpoint creation logic. (<a
href="https://redirect.github.com/opencontainers/runc/issues/4359">#4359</a>)</li>
</ul>
<h3>Static Linking Notices</h3>
<p>The <code>runc</code> binary distributed with this release are
<em>statically linked</em> with
the following <a
href="https://www.gnu.org/licenses/old-licenses/lgpl-2.1.en.html">GNU
LGPL-2.1</a> licensed libraries, with <code>runc</code> acting
as a &quot;work that uses the Library&quot;:</p>
<ul>
<li><a href="https://github.com/seccomp/libseccomp">libseccomp</a></li>
</ul>
<p>The versions of these libraries were not modified from their upstream
versions,
but in order to comply with the LGPL-2.1 (§6(a)), we have attached the
complete source code for those libraries which (when combined with the
attached
runc source code) may be used to exercise your rights under the
LGPL-2.1.</p>
<p>However we strongly suggest that you make use of your distribution's
packages
or download them from the authoritative upstream sources, especially
since
these libraries are related to the security of your containers.</p>
<!-- raw HTML omitted -->
<p>Thanks to all of the contributors who made this release possible:</p>
<ul>
<li>Akihiro Suda <a
href="mailto:akihiro.suda.cz@hco.ntt.co.jp">akihiro.s…
f7o pushed a commit to f7o/opentelemetry-collector-contrib that referenced this pull request Sep 12, 2024
@djaglowski @f7o
[chore] Fix flaky test in filelog receiver (open-telemetry#35012)
29a7ee6 
Quick fix for
open-telemetry#35007.

Ideally we should not need to depend on order of files returned from the
finder but there are apparently some subtle implications which need to
be better understood before we remove the assumption.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers

@TylerHelmuth TylerHelmuth TylerHelmuth approved these changes

@songy23 songy23 songy23 approved these changes

@BinaryFissionGames BinaryFissionGames BinaryFissionGames approved these changes

@andrzej-stencel andrzej-stencel Awaiting requested review from andrzej-stencel

Assignees

@dmitryax dmitryax

Labels
pkg/stanza
Projects
None yet
Milestone
v0.109.0
Development

Successfully merging this pull request may close these issues.
5 participants
@djaglowski @BinaryFissionGames @songy23 @TylerHelmuth @dmitryax