M5StickC - ESP32 remote CW keyer by OK1CDJ ondra@ok1cdj.com
Primary desiged for M5StickC but can be used with any ESP32 board
You can get M5Stack M5StickC CW Hat from hamshop.cz
https://www.hamshop.cz/morse-a-cw-c35/m5stack-m5stickc-cw-hat-i402/
If you would like try another ESP32 board remove #define M5Stick and correct Pin assigment
Features:
Responsive Web interface based on Boostrap
http based service for remote control from another application
Simple linux cwdaemon emulation - currently support only, send message, change speed and break trasmition - tested with Tucnak VHF Contest log http://tucnak.nagano.cz/wiki/Main_Page
Usage:
CW output is on G26 - connect optocoupler or transistor for keying and connect radio UDP server listen on 6789
WEB http://url/?apikey=XXXXXXXX when button A is pressed QR code with url is displayed
Config - http://url/cfg or hold button B on start when button A is pressed QR code with url is displayed
API http://url/sendmorse?apikey=XXXXXX&message=ok1cdj&speed=33
TODO: make compatibility with ESP32 with ethernet like OLIMEX ESP32-POE
